Masonry & Stone Range

Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.

Use Primer WBP for preparing porous concrete and screeds for Adheseal water-based membranes. It beds down dust and ensures strong adhesion, meeting Green Star criteria with very low VOCs.

Use Everflex Supaprime to ensure robust adhesion for Adheseal sealants and membranes on porous substrates like concrete and timber. Its rapid cure and deep penetration prevent costly delamination, providing a reliable bond for critical applications.

Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.

Use Adheseal Open Cell Backing Rod to prevent sealant gassing and three-sided adhesion in expansion joints. Its breathable polyurethane foam ensures faster, more complete sealant curing, critical for long-term performance across a wide range of cold and hot pour sealants.

Square Open Cell Backing Rod is a breathable, non-gassing foam for joint sealing. It prevents 3-sided adhesion, supports consistent sealant shape, and is compatible with various sealants. Ideal for expansion joints with square or rectangular profiles.

Adheseal Closed Cell Backing Rod is a high-quality polyethylene foam filler designed for construction joints, providing excellent support and preventing 3-sided adhesion for sealants.

Use Adheseal IPA Cleaner for critical surface preparation, removing oils, grime, and fluxes without leaving residue. This ensures sealants and adhesives achieve maximum bond strength and cure correctly across a wide range of surfaces.

Penetrating, non-film forming polyester-polymer treatment that waterproofs and hardens concrete, brick, render and most masonry from within. Spray applied at ~5–7 m²/L, passes negative hydrostatic pressure to 60 psi, paintable once dry.

Use Corflute Protection Board for reliable safeguarding of waterproofing membranes and finished surfaces. Its 2mm corrugated polypropylene construction delivers high resistance to puncture, impact, and abrasion, preventing costly site damage.

Use Megapoxy 108 for rapid, high-strength structural bonding and repair in civil engineering. It develops 95 MPa compressive strength in 2 hours, offers an ultimate 120 MPa, and cures in the presence of moisture.

Use Megapoxy 154 for priming and sealing concrete and masonry, especially on damp surfaces, to create a tough, chemical-resistant coating that handles foot and light vehicular traffic. Its water-based formulation provides excellent adhesion and penetration while serving as a moisture barrier.

Use Megapoxy 254 for high-strength structural bonding and repairs on concrete, metal, and natural stone. It delivers 70 MPa compressive strength, ensures a non-staining finish on sensitive materials, and cures in cold, damp conditions, reducing callbacks from bond failure.

Use Megapoxy 63 for high-strength, non-shrinking epoxy bonding of stone and tile to masonry. It delivers mechanical strengths superior to concrete, ensuring durable, long-lasting connections.

Use Megapoxy 69 for structural bonding and filling where high strength and impact resistance are critical. This non-sag epoxy delivers 120MPa compressive strength and 17MPa steel-to-steel lap shear, ensuring permanent bonds in civil, marine, and heavy-duty applications.

Use Megapoxy H for high-strength concrete and steel repairs, especially where potable water contact or wet conditions are present. Its AS/NZS 4020:2018 compliance and hydrophilic properties ensure performance and peace of mind in critical infrastructure applications.

Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.

Use Megapoxy HT for high-strength concrete repairs and steel anchoring in wet or harsh conditions. It delivers 100 MPa compressive strength and 36 MPa concrete bond, even resisting hydrogen sulphide.

Use Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.

Use Megapoxy Megabond for high-strength structural bonding and repair of concrete, metal, and natural stone. It delivers 60MPa compressive strength, handles a 1:1 mix ratio, and will not stain light-coloured marbles.

Megapoxy P1 is a professional two-component epoxy paste adhesive engineered for high-strength structural bonding and repair. With a user-friendly 1:1 mix ratio and exceptional compressive strength, it provides a permanent, waterproof, and chemical-resistant bond for concrete, metal, and stone.

Use Megapoxy PF for rapid set, high-strength bonding and repairs on concrete, metal, and stone. It sets in 7 minutes, achieves 90% cure in 1 hour at 25°C, and offers 70 MPa compressive strength for demanding structural applications.

Use Megapoxy PM for non-sag, high-strength bonding and filling on vertical or overhead surfaces, including natural stone where a non-staining finish is critical. It delivers 80 MPa compressive strength and cures reliably even in cold or damp conditions.

Use Megapoxy Pigment Paste for tinting epoxy systems, ensuring durable and consistent colour. This low VOC, epoxy-compatible paste avoids compromising the resin's final performance, reducing the risk of rework.

Use Sikaflex PRO for elastic movement and connection joints in concrete and masonry facades. It handles ±25% movement, is AS/NZS 4020 approved for potable water, and ensures durable, weather-resistant sealing.

Use Sikaflex PRO for elastic sealing of movement and connection joints in concrete and masonry, offering ±25% movement capability and potable water approval for reliable performance.

Sikaflex 11 FC+ is a single-part polyurethane adhesive and sealant that bonds concrete, masonry, wood, metal, glass, and ceramic while handling vertical and horizontal joint sealing. It suits facade joints, perimeter sealing, civil construction, and mixed-substrate bonding where you need movement capacity and a sandable, overpaintable finish.

Use Sikaflex Construction AP for reliable, elastic sealing of movement and connection joints, particularly on porous substrates. Its ±25% movement capability, non-sag application, and paintability ensure durable, professional finishes for facades and general construction.

Use Sikalastic-1K for flexible waterproofing and concrete protection. It provides crack-bridging ability up to 0.75 mm and resists negative pressure up to 2.5 bar for 72 hours, offering certified performance for drinking water contact and external membranes.

Use Bostik Seal N Flex One P390 for reliable sealing of construction and expansion joints that demand ±50% movement. It's a low modulus, one-component polyurethane sealant, acoustic rated and approved for potable water contact, preventing joint failure in dynamic environments.

Use Bostik Seal N Flex One P390 for reliable sealing of construction and expansion joints that demand ±50% movement. It's a low modulus, one-component polyurethane sealant, acoustic rated and approved for potable water contact, preventing joint failure in dynamic environments.

Use Bostik Seal 'N' Flex One Plus P590 for construction and expansion joints needing high movement capability. It offers +100% / -50% joint movement with bubble-free curing and AS/NZS 4020:2018 potable water certification.

Use Bostik Seal 'N' Flex One Plus P590 for construction and expansion joints needing high movement capability. It offers +100% / -50% joint movement with bubble-free curing and AS/NZS 4020:2018 potable water certification.

Use Bostik Fireban One for fire-rated and acoustic sealing of construction joints. It offers up to 4 hours of fire resistance, 50% joint movement capability, and excellent durability, ensuring compliant and lasting performance.

The Stainless Steel Caulking Blade is a versatile tool designed for various caulking and sealing applications.

The Pasco 8-Piece Caulking Blade Set is the essential toolkit for achieving flawless caulking and sealant finishes.

Use ARDEX Multiprime for priming porous concrete, render, and AAC to improve adhesion for ARDEX systems. It dries in 15-30 minutes and offers reliable bond strength for demanding applications, avoiding issues caused by untreated substrates.

Use ARDEX RA 88 PLUS for high-performance epoxy bonding and non-moving repairs on concrete and other materials, offering 87 MPa compressive strength and AS/NZS4020 potable water compliance in a non-sag, trowelable format.

Use ARDEX RA 142 for structural concrete crack injection and bonding, specifically targeting hairline to 3mm cracks. Its 190 cps low viscosity ensures deep penetration, delivering 70 MPa compressive strength to restore integrity.

Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.

Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.

Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.

Use Gripset OP Primer for reliable adhesion on challenging non-porous surfaces like metal, existing tiles, and PVC. This solvent-free, low VOC primer delivers a textured finish and dries in 30 minutes, ensuring a strong bond for Gripset membranes and tile adhesives.

Use Gripset Xpress Primer H2O Plus for fast-drying vapour barrier priming on damp or green concrete and mineral surfaces, ready for overcoating in 1 hour. Its colour change indicator confirms readiness, preventing blistering and efflorescence.

Use Gripset Xpress SP to prime challenging non-porous and porous substrates, ensuring strong adhesion without etching and drying in 30 minutes for faster job completion.

Use Gripset E-60 as a two-component epoxy primer and moisture barrier for concrete and masonry. It withstands up to 2.5 bar hydrostatic pressure, applies to damp and green concrete, and is AS 4020 compliant for potable water.

Elastoproof B50 is a high-performance joint band for waterproofing detail work at junctions, corners, control and expansion joints. The central “Flexible Zone” accommodates movement in multiple directions with up to 100% elastic recovery, while the fleece edges embed into a wet liquid membrane to create a seamless, durable seal. Designed for trade use in commercial, industrial, and residential wet areas.

Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.

Use Gripset BRW PF Squares for instant, primer-less sealing of penetrations and joint intersections, allowing immediate overcoating with membranes and finishes. Its 0.8mm butyl rubber provides a flexible, high-adhesion detail that prevents moisture ingress in critical areas, operating from -40°C to 100°C.

Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.