-
BAT Pro Electric Hand Mixer – 1600WVendor:B.A.TThe 1600W step up: a hand mixer for heavy material that stalls smaller mixers. Triple reduction gearing gives strong low-end torque, and the two speed ranges (0-380 and 0-660 RPM) let you crawl through dense compounds without whipping air into them. Use it for...
- $270.83
- $270.83
- Unit price
- per
-
BAT Trims EM1600P Spare Liquid Stirrer – 140mm x 590mm x M14 ThreadVendor:B.A.TThe spare paddle for the BAT Pro 1600W electric mixer. The 140mm head moves more material per turn than the small paddle, matching what the bigger motor can push.M14 thread for hand-tight swaps, 590mm shaft for deep buckets.
- $29.83
- $29.83
- Unit price
- per
-
BAT Pro Electric Hand Mixer – 1050W T-Shape HandleVendor:B.A.TA 1050W electric hand mixer for buckets of adhesive, grout, plaster, and paint. The triple reduction gearbox turns motor speed into paddle torque, so mixes come out consistent without stalling or burning the tool. T-handle grip for control from both sides, two speed settings...
- $194.58
- $194.58
- Unit price
- per
-
BAT EM 1050P Spare Liquid Stirrer – 120mm x 590mm x M14 ThreadVendor:B.A.TThe spare paddle for the BAT Pro 1050W electric mixer. Paddles wear and bend on site; a spare in the van means a bent paddle costs minutes, not a day.120mm mixing head, 590mm shaft, M14 thread for fast swaps on the compatible mixer.
- $22.92
- $22.92
- Unit price
- per
-
Raimondi Whisk Style Liquid StirrerVendor:B.A.TA four-blade whisk mixer with a 140mm head for buckets of paint, plaster, adhesives, and liquid membranes. Steel construction, M14 thread to suit most mixing drills.The whisk style folds material from the bottom of the bucket upward, which mixes faster and entrains less air...
- $59.50
- $59.50
- Unit price
- per
-
4 Blade Whisk Mixer Hex ShaftVendor:B.A.TA four-blade steel whisk paddle for drill-driven mixing. Four blades pull the material through itself instead of spinning it in circles, so buckets of adhesive, plaster, or paint blend without dry pockets at the base.120mm head, 550mm shaft, 10mm hex shank for standard drill...
- $19.17
- $19.17
- Unit price
- per
Frequently Asked Questions
What is a mixing paddle?
A mixing paddle attaches to a drill to blend powders and liquids. Spiral paddles mix cementitious screeds and mortars. Propeller paddles mix epoxy resins and two-part adhesives. The paddle shape determines the mixing action.
Can I use any drill for a mixing paddle?
Use a low-speed high-torque drill. Standard power drills lack the torque for heavy cementitious mixes and may overheat. Variable-speed hammer drills work at low speed. Check the paddle shaft fits your drill chuck.
What is the difference between a spiral and a propeller paddle?
Spiral paddles pull material from the bottom and sides for cementitious batches. Propeller paddles shear and blend resin components for epoxy and polyurethane. Use the paddle that matches your material type.
Do mixing paddles fit standard drill chucks?
Most paddles in this range use a hex or round shaft that fits standard drill chucks. M14 shafts need an SDS or special chuck adapter. Check the shaft diameter before you buy.
What materials do these paddles mix?
These paddles mix cementitious screeds, mortars, grouts, and two-part resin systems. Spiral paddles suit thick cementitious batches. Propeller paddles suit thinner epoxy and polyurethane blends.
How do I clean a mixing paddle?
Clean the paddle immediately after use. For cementitious mixes, scrub with water and a stiff brush before the material hardens. For resin, wipe with solvent while the resin is still wet.