-
Megapoxy 108Vendor:
For civil engineering applications requiring rapid structural strength, Megapoxy 108 is a rapid-setting liquid epoxy binder formulated for splicing bridge piles and executing high-strength repairs to precast concrete. Its fast compressive and impact strength development allows pile driving operations to resume with minimal downtime,...- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 254Vendor:
For bonding precast concrete, natural stone, and heavy metal fixtures on vertical or overhead surfaces where sagging would ruin the assembly, Megapoxy 254 is a non-sag epoxy adhesive paste that holds its position without slipping. Formulated to cure even under cold and damp conditions,...
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
For securing reflective road markers, ceramic markers, LED road markers, concrete carpark stops, and parking sensors, Megapoxy 36 DuoMix provides a rapid-setting structural bond to asphalt, bitumen, and concrete. Dispensed through a 1:1 twin cartridge system with a self-mixing static nozzle, this dual-component epoxy...
- From $81.17
- From $81.17
- Unit price
- per
-
Megapoxy 63Vendor:
For bonding mitre joints, natural stone, and porcelain where a visible glue line would ruin the finish, Megapoxy 63 is a translucent, high-strength epoxy gel. This solvent-free adhesive allows for thin film applications and can be tinted with pigment pastes to match the exact...
- From $172.66
- From $172.66
- Unit price
- per
-
Megapoxy 69Vendor:
For high-load structural joinery, marine assembly, and stone fabrication where components are subject to repeated high-impact forces, Megapoxy 69 provides a permanent bond with a non-sag, gel-type consistency. It secures metals, timber, granite, marble, and fibreglass on vertical and overhead surfaces without slumped joints...
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy 84Vendor:
For high-wear industrial environments where high alumina ceramic tile linings must be fixed to steel or concrete under elevated temperatures, Megapoxy 84 provides the high-strength, heat-tolerant bond required to prevent lining failure. It is also formulated for the extreme mechanical demands of locking the...
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy HVendor:
For structural concrete repairs, steel anchoring, and wet-to-dry concrete bonding, Megapoxy H is a low-viscosity, solvent-free hydrophilic epoxy resin that creates permanent bonds stronger than the concrete itself. It complies with AS/NZS 4020:2018 for potable water contact, making it suitable for drinking water structures,...
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HTVendor:
For wet-to-dry concrete bonding, structural repairs, and underwater or splashzone applications, Megapoxy HT is a hydrophilic epoxy gel adhesive that forms permanent bonds on concrete, metal, and steel surfaces. Its formulation is solvent-free, contains no volatile organic compounds (Nil V.O.C.), and resists hydrogen sulphide...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
For structural concrete crack repair, low-pressure injection, and masonry sealing, Megapoxy HX is a 100% solids, solvent-free epoxy liquid with an extra-low mixed viscosity of 200cps at 25°C. This thin profile enables deep capillary penetration into tight fissures, pores, and micro-cracks across concrete, masonry,...
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MegabondVendor:
For bonding natural stones and tiles to masonry substrates where staining or moisture sensitivity is a risk, Megapoxy Megabond provides a high-strength, structural epoxy connection. This VOC-free, 100% solids adhesive cures to an off-white finish that will not stain light-coloured marbles, making it suitable...
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy P1Vendor:
For high-strength structural bonding and concrete repair, Megapoxy P1 is a two-component gap-filling epoxy paste formulated for vertical, overhead, and damp-condition applications. It is chemically resistant to hydrogen sulphide in sewage systems and complies with AS/NZS 4020:2018 for contact with potable drinking water, making...
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PFVendor:
For emergency repairs to concrete structures, pipes, and tanks, Megapoxy PF is a rapid-set epoxy paste adhesive that hardens-as-you-hold-it. It sets in seven minutes and achieves more than half its ultimate strength within 15 minutes of mixing at 25°C, making it suitable for immediate...
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy PMVendor:
For structural bonding and repair jobs on vertical or overhead surfaces where sagging must be prevented, Megapoxy PM provides a non-sag epoxy adhesive paste that holds its position. When properly mixed, this two-part epoxy paste secures heavy materials like precast concrete, natural stone, and...
- From $80.50
- From $80.50
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Mapei Kerapoxy Adhesive is a two-component R2T epoxy tile adhesive for demanding wall and floor installations where chemical resistance, high bond strength and no vertical slip are required. It is suited to ceramic, porcelain and compatible stone, including specialist wet-area and swimming-pool applications such...- $181.98
- $181.98
- Unit price
- per
Filter By Products
Frequently Asked Questions
How do two-part epoxy adhesives work?
Mix resin and hardener at a fixed ratio. The chemical reaction cures the mix into a hard solid. Measure exactly. Wrong mixing leaves soft spots that never cure.
Can I use epoxy adhesive on concrete cracks?
Yes. Megapoxy H is a thin liquid epoxy for crack injection. It bonds wet or dry concrete and cures stronger than the concrete. It is also rated for potable water.
How do I prepare surfaces for epoxy?
Strip all paint, galvanising, and oil. Grit blast or abrade metal to a bright finish. Wire brushing is not enough. Concrete needs mechanical cleaning to remove laitance.
How fast does epoxy adhesive cure?
It depends on the grade. Megapoxy 36 sets road markers traffic-ready in one hour at 25°C. Structural grades take longer. Do not apply any epoxy below 10°C.
Can epoxy adhesive fix swimming pool tiles?
Yes. Kerapoxy Adhesive holds ceramic tiles in fibreglass pools. It resists water and pool chemicals after cure, with no vertical slip while you work. Match the product spec to the job conditions before you start.
What mix ratios do epoxy adhesives use?
Each grade has its own. Megapoxy H mixes at 3 to 1 by volume. Kerapoxy mixes at 80 to 20 by weight. Follow the data sheet exactly.