-
Adheseal PU15 Polyurethane AdhesiveVendor:
Adheseal PU15 is a low-modulus polyurethane sealant and adhesive built for highly flexible movement and connection joints, with a particular strength in window perimeter sealing, glazing weatherseals, curtain walls and façade joints. Its soft Shore A 15 cured profile, 0.2 MPa modulus and greater...- From $11.99
- From $11.99
- Unit price
- per
-
Adheseal N40 Slicone SealantVendor:
For wet areas, metal roofing, marine joints, and general industrial sealing where movement, moisture, and mould are constant risks, Adheseal N40 Silicone Sealant provides a highly flexible, non-corrosive barrier. This neutral-cure oxime formulation adheres reliably without corroding sensitive metals like galvanised steel or Colourbond,...
- From $6.40
- From $6.40
- Unit price
- per
-
Adheseal N70 Industrial Silicone SealantVendor:
Adheseal N70 Industrial Silicone Sealant is a neutral-cure, high-movement silicone for industrial sealing, window perimeters, general glazing, weathersealing, expansion joints and exterior construction joints. With ±50% movement capability and 600% elongation at break, N70 is designed for demanding joints that need to remain flexible...
- From $8.50
- From $8.50
- Unit price
- per
-
Adheseal Hi-Flex Construction Plus MS Polymer SealantVendor:
For expansion joints, perimeter window fixing, and cladding joints where high movement capability is required, Adheseal Hi-Flex Construction Plus MS Polymer Sealant provides a neutral-cure, low-modulus elastomeric seal that accommodates up to 50% joint movement. Based on hybrid MS polymer technology, this single-component sealant...
- From $11.77
- From $11.77
- Unit price
- per
-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably...
- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal Primer 50AVendor:
For high-liability installations on non-porous substrates where maximum performance and longevity are required, Primer 50A is a fast-drying adhesion promoter. This clear alcohol solution is a single-pack, ready-to-use wipe that prepares difficult-to-bond surfaces for Polyurethane, MS, Silicone, and acrylic sealants and adhesives. How it...
- $53.03
- $53.03
- Unit price
- per
-
Everbond General Purpose PVAVendor:
For cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance...
- From $60.48
- From $60.48
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
For bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing. How it works Everbond Melamine PVA Adhesive is a high-solids PVA/EVA-based adhesive...
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $72.58
- From $72.58
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
For laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces,...
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Brush Contact AdhesiveVendor:
For laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims...
- From $81.85
- From $81.85
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
For automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for...
- $298.28
- $298.28
- Unit price
- per
-
Industrial BrushVendor:
A natural hog bristle brush for oil-based paints, varnishes, resins, and anti-fouling coatings. The stiff natural bristle carries thick material and lays it out evenly where synthetic brushes would go limp.Flick the bristles out before first use to shed the loose ones. Widths from...
- From $1.00
- From $1.00
- Unit price
- per
-
Aluminium Angle Unequal 25x12Vendor:
Aluminium Angle Unequal 25x12 is a 6060 T5 mill-finish aluminium L-section with 25 × 12 mm unequal legs. The unequal 25 × 12 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $7.46
- $7.46
- Unit price
- per
-
Aluminium Angle Unequal 32x20Vendor:
Aluminium Angle Unequal 32x20 is a 6060 T5 mill-finish aluminium L-section with 32 × 20 mm unequal legs. The unequal 32 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $13.64
- From $13.64
- Unit price
- per
-
Aluminium Angle Unequal 40x20Vendor:
Aluminium Angle Unequal 40x20 is a 6060 T5 mill-finish aluminium L-section with 40 × 20 mm unequal legs. The unequal 40 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $16.52
- From $16.52
- Unit price
- per
-
Aluminium Angle Equal 40x40Vendor:
Aluminium Angle Equal 40x40 is a 6060 T5 mill-finish aluminium L-section with 40 × 40 mm equal legs. The equal 40 × 40 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- $20.28
- $20.28
- Unit price
- per
-
Aluminium Angle Unequal 50x25Vendor:
Aluminium Angle Unequal 50x25 is a 6060 T5 mill-finish aluminium L-section with 50 × 25 mm unequal legs. The unequal 50 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $17.23
- From $17.23
- Unit price
- per
-
Aluminium Angle Unequal 50x40Vendor:
Aluminium Angle Unequal 50x40 is a 6060 T5 mill-finish aluminium L-section with 50 × 40 mm unequal legs. The unequal 50 × 40 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $22.41
- From $22.41
- Unit price
- per
-
Aluminium Angle Equal 50x50Vendor:
Aluminium Angle Equal 50x50 is a 6060 T5 mill-finish aluminium L-section with 50 × 50 mm equal legs. The equal 50 × 50 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $25.40
- From $25.40
- Unit price
- per
-
Aluminium Angle Unequal 60x25Vendor:
Aluminium Angle Unequal 60x25 is a 6060 T5 mill-finish aluminium L-section with 60 × 25 mm unequal legs. The unequal 60 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $43.01
- $43.01
- Unit price
- per
-
Aluminium Angle Unequal 70x25Vendor:
Aluminium Angle Unequal 70x25 is a 6060 T5 mill-finish aluminium L-section with 70 × 25 mm unequal legs. The unequal 70 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $15.73
- $15.73
- Unit price
- per
-
Aluminium Angle Equal 76x76Vendor:
Aluminium Angle Equal 76x76 is a 6060 T5 mill-finish aluminium L-section with 76 × 76 mm equal legs. The equal 76 × 76 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $133.03
- From $133.03
- Unit price
- per
-
Aluminium Angle Unequal 100x50Vendor:
Aluminium Angle Unequal 100x50 is a 6060 T5 mill-finish aluminium L-section with 100 × 50 mm unequal legs. The unequal 100 × 50 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $56.43
- From $56.43
- Unit price
- per
-
Megapoxy 132Vendor:
For floor protection in food and beverage production facilities, pharmaceutical industries, hospital kitchens, and high-traffic forklift ramps, Megapoxy 132 provides a high-strength, solvent-free epoxy barrier. This low-viscosity system is formulated to resist regular industrial cleaning and abrasion, and it carries AS 4020:2018 approval for...- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy 84Vendor:
For high-wear industrial environments where high alumina ceramic tile linings must be fixed to steel or concrete under elevated temperatures, Megapoxy 84 provides the high-strength, heat-tolerant bond required to prevent lining failure. It is also formulated for the extreme mechanical demands of locking the...
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy HICBVendor:
For backing metal liner plates and filling gaps between liners and support structures in cone crushers, gyratory crushers, and grinding mills, Megapoxy HICB is a two-component, 100% solids, pourable epoxy grout. It provides the high impact resistance and compressive strength needed to withstand heavy...
- $148.06
- $148.06
- Unit price
- per
-
Megapoxy MCVendor:
For high-traffic food and beverage facilities, chemical bunds, and wastewater infrastructure, Megapoxy MC provides a 100% solids, VOC-free epoxy maintenance coating that resists heavy abrasion, chemical exposure, and hydrogen sulphide gas. It protects concrete and steel substrates, curing to a hygienic, dust-free gloss finish...
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy ThinnersVendor:
Megapoxy Thinners is a solvent blend for thinning Megapoxy epoxy products. Add small amounts and mix until the viscosity suits the job: more flow for wet-out and penetration, less for filling. It is highly flammable. Work in a ventilated area, keep ignition sources away,...
- $221.95
- $221.95
- Unit price
- per
-
Megapoxy MegadureVendor:
For equipment exposed to severe wear in mines, ball mills, coal-fired plants, dredging operations, and abrasive slurry pumps, Megadure Ceramic provides a high alumina bead epoxy lining to protect critical metal, steel, and concrete surfaces from extreme abrasion. What it does Megadure Ceramic is...
- $128.51
- $128.51
- Unit price
- per
-
Permabond 102Vendor:PermabondFor high-speed production lines and fast fixturing of close-fitting components, Permabond 102 provides rapid bonding of plastics, rubber, and metals. This low-viscosity ethyl cyanoacrylate polymerises quickly when pressed into a thin film between components, utilising surface moisture to initiate the cure without mixing or...
- From $42.46
- From $42.46
- Unit price
- per
-
Permabond 240Vendor:PermabondFor high-speed production lines assembling plastics, rubber, or metals, Permabond 240 is a high-viscosity cyanoacrylate that fills gaps up to 0.4 mm and prevents rapid absorption on porous substrates. It polymerises quickly when pressed into a thin film between parts, utilising surface moisture to...
- From $42.46
- From $42.46
- Unit price
- per
-
Armadillo DVendor:ArmadilloFor warehouse floors, manufacturing plants, and residential garages where dusting, rain damage, or weak mortar has compromised the concrete, Armadillo D penetrates the surface to increase abrasion resistance and seal the substrate. This water-based silicate compound chemically converts soft, porous calcium hydroxide into high-strength...
- $283.67
- $283.67
- Unit price
- per
-
Great Aussie Tradie Cleanup WipesVendor:Great Aussie WipesHeavy wipes for filthy hands and finished surfaces. They lift sealant, adhesive, bitumen, grease, paint, and coating residue, and they will not scratch the surface under the mess.200 x 250mm sheets, 100% plastic free: compostable and biodegradable, so the site bin is not the...
- From $25.00
- From $25.00
- Unit price
- per
-
Large Disposable Caulking Sticks (50 Pack)Vendor:Adheseal ToolsLarge disposable caulking sticks, 50 to a pack. The flexible stick tools a bead in a gap too tight for a blade, and it throws away after, so silicone never meets acrylic on the same tool.Big pack, big jobs: no stopping mid-run to wash...
- $6.70
- $6.70
- Unit price
- per
-
Small Disposable Caulking Sticks (150 pack)Vendor:Adheseal ToolsSmall Disposable Caulking Sticks are simple tooling sticks for smoothing and shaping fresh sealant in small joints, corners and mouldings. This pack contains 150 sticks for quick single-use finishing on site.
- $3.80
- $3.80
- Unit price
- per
-
General Purpose Polyester Paint BrushVendor:Adheseal ToolsA general purpose polyester paint brush for walls, ceilings, and trim. The synthetic bristles stay stiff in water-based paints instead of going limp, hold a good load, and cut in with a sharp edge.The brush to reach for on acrylic and latex work when...
- From $6.26
- From $6.26
- Unit price
- per
-
Industrial Cleaning Rags 10kgVendor:Adheseal ToolsWiping rags in 10kg bags, the workshop staple. Pick the grade to suit the job: premium white cotton for glass, coatings, and finishing where lint and colour would show, or coloured and white t-shirt material for general cleanup, polishing, and maintenance.Recycled cotton with low...
- From $36.80
- From $36.80
- Unit price
- per
-
Handyman Cartridge Caulking Gun Type 20Vendor:Adheseal ToolsA steel-framed manual cartridge gun for maintenance sealing: bathroom silicone, acrylic gaps, trim adhesive. The rigid cradle stops the cartridge sliding under pressure, so the bead stays even for the length of the tube.A step up from plastic guns for toolboxes that get used...
- $21.99
- $21.99
- Unit price
- per
-
Jumbo Cartridge Gun 850mlVendor:Adheseal ToolsAn 850ml jumbo cartridge gun in steel, for structural sealants that would stall a standard gun. The low gearing trades speed for push: thick material comes out at steady pressure, so the joint fills without voids.The frame rotates a full circle, which matters in...
- $80.43
$0.00- $80.43
- Unit price
- per
-
Heavy Duty Cartridge Caulking Gun Type 35Vendor:Adheseal ToolsA heavy-duty 310ml cartridge gun for sealants and adhesives on site. Aluminium alloy frame, rotating barrel so you can keep the bead level around a corner without twisting your wrist, and enough thrust to move thick construction adhesives without effort.Suits construction, plumbing, and automotive...
- $54.99
- $54.99
- Unit price
- per
-
Twin Component Cartridge Gun 400ml 10:1Vendor:Adheseal ToolsA coaxial twin gun for 400ml 10:1 cartridges: two-part epoxy, PU, and acrylic structural adhesives for deep-hole anchoring and autoglass work. The reinforced steel frame delivers the thrust that viscous coaxial material needs, and the alloy trigger keeps the flow smooth rather than surging.Working...
- $32.99
$64.90- $32.99
- Unit price
- per
-
Twin Component Cartridge Gun – 2 x 200mlVendor:Adheseal ToolsA twin-component gun for side-by-side 200ml cartridges of two-part epoxy and structural sealant. One trigger drives both plungers together, so the cartridge ratio does the ratio work and the static mixer does the mixing: no hand-mixing errors in a structural bond.The aluminium handle and...
- $98.99
- $98.99
- Unit price
- per
-
Twin Component Cartridge Gun 2 x 300mlVendor:Adheseal ToolsThe bigger twin gun: 2 x 300ml cartridges of two-part epoxy, polyurea, or structural sealant, driven through a high-thrust steel frame. More capacity per load for anchoring and rapid-set joints, with the same rule: the gun holds the ratio, the mixer does the blending.Ergonomic...
- $98.99
- $98.99
- Unit price
- per
-
Handyman Sausage Caulking Gun Type 1Vendor:Adheseal ToolsA light manual sausage gun for 600ml foil packs. At 0.9kg it is the lightest gun in the range, which counts on a day of overhead joints. The aluminium alloy handle keeps bead control steady without the weight of the trade guns.Keep it within...
- $49.49
- $49.49
- Unit price
- per
-
Trade Sausage Caulking Gun Type 3Vendor:Adheseal ToolsThe all-round trade sausage gun: Type 3 extrudes 600ml foil packs of viscous sealant and adhesive with an aluminium alloy frame built for daily site work, and converts to bulk loading for big jobs.Balanced for repetitive use on waterproofing, construction joints, and autoglass work.
- $76.99
- $76.99
- Unit price
- per
-
Professional Heavy Duty Sausage Caulking Gun Type 5Vendor:Adheseal ToolsThe heavy pressure gun in the range: Type 5 pushes high-viscosity sealants into expansion joints all day without the trigger fighting back. Industrial aluminium handle with TPR grips and the leverage to bead thick PU and hybrid sealants by hand.Converts from 600ml sausage packs...
- $109.99
- $109.99
- Unit price
- per
-
Cordless Sausage Caulking Gun M8504Vendor:Adheseal ToolsA cordless sausage gun for the days the trigger hand gives out before the joints do. The high-thrust motor pushes stiff PU and hybrid sealants from 600ml packs at a steady rate, and the variable speed trigger sets the bead pace, not your grip...
- $343.20
- $343.20
- Unit price
- per
Frequently Asked Questions
What will I find in the Manufacturing Range?
Materials and gear for production and factory maintenance. Aluminium angles for frames and edging, contact and PVA adhesives for panels and boards, epoxies for machinery, coatings for plant floors, plus guns, brushes, wipes, and rags.
Do I need everything here for one job?
No. A cabinet line needs panel adhesives. A workshop build needs angles and contact glue. Machinery repairs need epoxy grout or a wear lining. Pick what your assembly, substrates, and production method need.
How do I choose between contact adhesive and PVA?
Contact adhesive bonds laminates, foam, and upholstery after a short flash-off, with pressure on both faces. PVA suits timber, board, and veneer work with clamp or press time. Match the glue to the materials and the handling time.
Which products suit factory floors and food areas?
Megapoxy 132 seals concrete in food, beverage, and pharmaceutical areas. Megapoxy MC coats bunds and wastewater concrete without solvent. Both need prepared, dry concrete. Check the data sheet for cure time and chemical exposure.
What maintenance products suit crushers and mills?
Megapoxy HICB is a pourable grout that backs liner plates in crushers and mills. Megapoxy 84 bonds ceramic wear tiles. Megadure lines badly worn metal and concrete. Each needs its own mixing ratio and cure control.
Do you sell the guns and accessories too?
Yes. Sausage and cartridge guns, twin-component guns for epoxies, caulking sticks, paint brushes, industrial wipes, and cleaning rags are all in this range. They ship with your adhesives in one order.