Download Product Data
Megapoxy Thinners is a solvent blend for thinning Megapoxy epoxy products. Add small amounts and mix until the viscosity suits the job: more flow for wet-out and penetration, less for filling.
It is highly flammable. Work in a ventilated area, keep ignition sources away, and wear gloves and eye protection. Use only with Megapoxy epoxies; other brands may cure differently.
Frequently Asked Questions About Megapoxy Thinners
Q: What is Megapoxy Thinners used for?
A: Megapoxy Thinners is used to reduce the viscosity of Megapoxy epoxy products for easier application.
Q: Is Megapoxy Thinners flammable?
A: Yes, Megapoxy Thinners is highly flammable and should be stored away from heat sources and open flames.
Q: What safety precautions should I take when using Megapoxy Thinners?
A: Use in well-ventilated areas, wear appropriate PPE, and avoid inhalation and skin contact.
Q: How should Megapoxy Thinners be stored?
A: Store in a cool, dry, well-ventilated place, away from heat sources and ignition.
Q: What are the main components of Megapoxy Thinners?
A: Megapoxy Thinners primarily contains Ethanol and Xylene.
Q: What should I do in case of a spill?
A: Remove ignition sources, contain the spill, and use absorbent materials. Dispose of properly.
Megapoxy Thinners can be used on the following substrates:
- Epoxy resins and coatings.
- Tools and equipment used with epoxy.
Megapoxy Thinners Physical Properties
| Property | Value |
|---|---|
| Chemical Composition | 0.7 (n-Butyl acetate=1) |
| Density | 0.86-0.87 |
| Flash Point | 27°C |
| Service Temperature | 138°C |
| Clean Up | Use in well-ventilated areas and keep away from ignition sources. |
| Classification | Flammable Liquids - Category 2 |
| Standards | Ethanol (30-60%), Xylene (30-60%), Non-Hazardous Balance |