11
The static mixer nozzle for Megapoxy PM cartridges, for two-part epoxy paste in stone anchoring and structural work. The helical elements blend both parts under extrusion pressure, so the paste goes into the borehole mixed, air-free, and at ratio.
One nozzle per cartridge keeps the mixing clean: no cured paste back through the manifold, no tacky spots in a load-bearing bond.
Helical elements blend the paste at ratio under pressure.
Air-free delivery into deep boreholes and overhead work.
Disposable: no cross-contamination at the manifold.
Fit the nozzle, purge into waste until the mix is even, then inject from the base of the borehole outward. Match the extrusion rate to the pot life; a set mixer means a fresh nozzle and a fresh start.
For Megapoxy PM cartridges. Single use. Check the cartridge and nozzle pairing before the job, not on the scaffold.