-
Gripset P39Vendor:
Gripset P39 is a fibre-enhanced polyurethane-hybrid waterproofing membrane for exposed or under-tile applications. It is highly flexible, UV and weather resistant, handles early ponding and permanently wet conditions after cure, and can serve as a light-foot-trafficable finish on suitable external areas. Compare waterproofing systems:...- $232.47
- $232.47
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Gripset Xpress Multi Pro is a fast-cure, water-based elastomeric waterproofing membrane for exposed and under-tile applications. It is designed to resist early rain and ponding, remain stable in permanently wet conditions after cure and provide a UV-resistant, light-foot-trafficable finish on suitable external areas. Compare...
- $389.93
- $389.93
- Unit price
- per
-
Gripset LSVendor:
Gripset LS is a hard-wearing, non-slip external trafficable coating used as the finishing layer over compatible Gripset base waterproofing membranes. It is designed for UV-exposed roofs, decks, balconies, podiums and maintenance areas subject to light foot traffic; it is not a standalone elastomeric waterproofing...
- $230.09
- $230.09
- Unit price
- per
-
SILCOR® Top Coat 80Vendor:
SILCOR® Top Coat 80 is GCP's two-part, UV-resistant aliphatic polyurethane protective coating for compatible exposed SILCOR membrane systems. It creates a colour-stable, non-slip protective finish and is not a standalone waterproofing membrane. Where Top Coat 80 fits GCP's current Australian documentation lists Top Coat...- From $691.21
- From $691.21
- Unit price
- per
-
SILCOR® 580Vendor:
SILCOR® 580 is GCP's two-part, low-odour, heavy-duty trafficable polyurethane waterproofing membrane for horizontal substrates set to falls. It is a high-solids, chemically cured Class III membrane designed for demanding exposed and protected waterproofing systems. Where SILCOR 580 excels Stadiums, car park decks and other...
- $699.00
- $699.00
- Unit price
- per
Frequently Asked Questions
What is a trafficable membrane?
A trafficable membrane is a waterproof coating that supports foot traffic or vehicles after curing. Some products work as standalone exposed membranes. Others are protective top coats applied over a base waterproofing membrane. Match the traffic rating to the end use.
Which trafficable membranes work as standalone exposed surfaces?
Gripset P39 and Gripset Xpress Multi Pro are standalone UV-stable membranes that accept light foot traffic without a topcoat. Both are water-based, Class III, and suit decks and balconies. Apply them by brush or roller at 1.0 mm thickness.
What is the difference between a trafficable membrane and a trafficable top coat?
A trafficable membrane provides waterproofing and traffic resistance in one product. A trafficable top coat adds UV and wear resistance over a separate base membrane. Gripset LS and Silcor Top Coat 80 are top coats only and do not waterproof on their own.
Which product supports the heaviest traffic?
GCP Silcor 580 supports heavy foot and light vehicle traffic as part of a three-component system. It needs Silcor 580 wear coat and Silcor Top Coat 80 applied in sequence. It is a two-part polyurethane with more than 8 MPa tensile strength.
How fast can I walk on a trafficable membrane?
Silcor Top Coat 80 dries in 2 hours. Gripset LS accepts recoat in 4 hours. Gripset Xpress Multi Pro resists rain in 3 hours. Full cure for Silcor 580 takes 15 hours. Check the manufacturer data sheet for traffic readiness times.