-
Adheseal Unobond Polyurethane AdhesiveVendor:
Adheseal Unobond is a single-pack, solvent-free, moisture-curing D4 polyurethane adhesive for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. Its gel consistency makes this cartridge-applied polyurethane glue easy to control on close-fitting joints, while the cured bond is...- From $17.65
- From $17.65
- Unit price
- per
-
Adheseal Unobond FC Polyurethane AdhesiveVendor:
Adheseal Unobond FC is a fast-setting, single-pack D4 liquid polyurethane adhesive supplied in a 6 kg bulk format for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. It is designed for higher-volume workshop and fabrication use where a...
- $173.55
- $173.55
- Unit price
- per
-
Adheseal Multi-Grip Construction AdhesiveVendor:
For sub-floor and wall installations where movement, joint squeaks, and sheet sagging are common installation problems, Multi-Grip Construction Adhesive provides a high initial grab acrylic bond. It complies with AS 2753 for fixing plasterboard wallboards and AS 2329 for fixing other wallboards, curing via...
- From $7.56
- From $7.56
- Unit price
- per
-
Adheseal High Power 609 Instant Grab AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or movement, High Power 609 Instant Grab Adhesive provides a 1-second immediate grab that reduces the need for temporary mechanical supports. This single-part MS hybrid polymer cures via atmospheric moisture, forming an elastic...
- From $15.70
- From $15.70
- Unit price
- per
-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably...
- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal NP-60 Polyurethane Windscreen AdhesiveVendor:
For windscreen replacement requiring rapid return-to-service, NP-60 is a 600ml polyurethane windscreen adhesive — commonly described as windscreen urethane or auto glass adhesive — with a 1-hour drive-away time with dual airbags. Tested to FMVSS 212, it provides high green strength and a high-modulus,...
- From $16.90
- From $16.90
- Unit price
- per
-
Adheseal Multi-Tack Acrylic SealantVendor:
For fixing wallboards, timber flooring, and interior mouldings where joint movement can cause squeaks or structural warping, Adheseal Multi-Tack Acrylic Sealant provides a high-strength, flexible bond. This water-based adhesive complies with AS:2753 for fixing plasterboard wallboards and AS:2329 for fixing other wallboards, ensuring compliant...
- From $3.83
$3.65- From $3.83
- Unit price
- per
-
Adheseal Builders Nails AdhesiveVendor:
For high-strength structural bonding of wall mouldings, architraves, skirting boards, and flooring panels, Builders Nails Adhesive is a solvent-based synthetic rubber construction adhesive that prevents vertical slump. It can be applied as a one-way liquid adhesive or a two-way contact adhesive to establish a...
- From $4.51
- From $4.51
- Unit price
- per
-
Everbond General Purpose PVAVendor:
For cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance...
- From $60.48
- From $60.48
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
For bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing. How it works Everbond Melamine PVA Adhesive is a high-solids PVA/EVA-based adhesive...
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $72.58
- From $72.58
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
For laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces,...
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Brush Contact AdhesiveVendor:
For laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims...
- From $81.85
- From $81.85
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
For automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for...
- $298.28
- $298.28
- Unit price
- per
-
Everbond Styrobond STVendor:
For bonding sheet metals, fibre cement sheet, plywood, and particle board to expanded polystyrene foam, Everbond Styrobond ST is a spray-grade contact adhesive formulated with specialised solvents that will not melt or degrade the polystyrene substrate. Its low viscosity allows application through conventional spray...
- $279.60
- $279.60
- Unit price
- per
-
Everbond 2P CrosslinkerVendor:
For high-strength laminating, rubber bonding, and construction joints subjected to elevated temperatures, Everbond 2P Crosslinker (Part B) is mixed with Everbond 2P (Part A) to create a tough, flexible contact adhesive bond. The crosslinking chemical reaction increases both the physical shear strength and the...
- $22.00
- $22.00
- Unit price
- per
-
Permabond 102Vendor:PermabondFor high-speed production lines and fast fixturing of close-fitting components, Permabond 102 provides rapid bonding of plastics, rubber, and metals. This low-viscosity ethyl cyanoacrylate polymerises quickly when pressed into a thin film between components, utilising surface moisture to initiate the cure without mixing or...
- From $42.46
- From $42.46
- Unit price
- per
-
Permabond 240Vendor:PermabondFor high-speed production lines assembling plastics, rubber, or metals, Permabond 240 is a high-viscosity cyanoacrylate that fills gaps up to 0.4 mm and prevents rapid absorption on porous substrates. It polymerises quickly when pressed into a thin film between parts, utilising surface moisture to...
- From $42.46
- From $42.46
- Unit price
- per
Frequently Asked Questions
How do I choose the right adhesive?
Start from the job. Timber and marine bonds take polyurethane. Concrete repair and steel anchoring take epoxy. Panels and skirtings take MS polymer grab adhesive. Laminates and foam take contact adhesive.
Which adhesive bonds without clamps?
MS polymer grab adhesives, such as MS-609, hold parts straight away with no nails or clamps. Contact adhesives also bond on contact once both faces are touch dry.
Which adhesives are waterproof?
Polyurethane adhesives carry a D4 rating for marine and weather-exposed work. Epoxies also resist water and chemicals. Water-based acrylic products are not for immersion.
Do you stock adhesives for plastics?
Yes. Cyanoacrylate bonds small rigid parts in seconds. MMA bonds ABS, fibreglass, and composites at structural strength. Polypropylene and polyethylene need a primer first. Match the product spec to the job conditions before you start.
Which adhesive suits joinery?
PVA for general joinery, melamine, and cabinets. Cyanoacrylate with activator for fast MDF and timber assembly. MS polymer for panels and benchtops. Match the product spec to the job conditions before you start.
Which adhesives need mixing?
Epoxy and MMA are two-part products. Mix resin and hardener at the stated ratio before use. Polyurethane, MS polymer, contact, and acrylic adhesives are single pack.