SP-230 Spray Contact Adhesive - Everbond
A premium spray contact adhesive with very high heat resistance and fast initial grab.
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
- $163.02
- $163.02
- Unit price
- per
Prices do not include GST
Couldn't load pickup availability
Shipping & Delivery
**$15.95 + GST for Australia-wide shipping, excluding DG, oversized or long-length items, and bagged items weighing 15kg or above. If your order includes any of these, you will be contacted to arrange additional freight fees
Everbond SP-230 Spray Contact is a premium sprayable contact adhesive that has been formulated to meet varied needs for laminate & foam fabrication industry. This adhesive has fast initial grab & drying time, and a very high heat resistant and water resistant bond.
Product Characteristics:
- Colour: Natural, Red
- Size: 20 Litre
Uses
- Bonding laminates in cabinet making and shop-fitting applications
- Motor and marine trimming applications
- Bonding surfaces such as timber, MDF and particleboard, metal, urethane foam, cloth-backed and polyester backed vinyl, leather, carpet and polyurethane foam in motor trimming applications
Benefits
- One-component adhesive
- Very short flash-off time
- High initial strength
- Easy to apply
- Resistant against aging
- High heat resistance
- Broad adhesion range
- Fast dry time (Approximately 3-5 minutes)
Application
- The adhesive generally is applied with suitable rollcoater, tooth-comb, brush, or spray gun.
- Apply to both surfaces evenly.
- Wait until touch dry (normally 3-5min) depending on drying conditions, then bring the materials together with strong even pressure.
- Care must be taken to avoid the formation of adhesive pools on the bonding surfaces. Entrapped solvent causes weak bond & blistering.
- For application on open weave or porous materials, spray apply the adhesive to avoid the adhesive bleeding through the substrate.
- Once the container is opened, the material must be used up in a short time.
Uses
- Bonding laminates in cabinet making and shop-fitting applications
- Motor and marine trimming applications
- Bonding surfaces such as timber, MDF and particleboard, metal, urethane foam, cloth-backed and polyester backed vinyl, leather, carpet and polyurethane foam in motor trimming applications
Application
- The adhesive generally is applied with suitable rollcoater, tooth-comb, brush, or spray gun.
- Apply to both surfaces evenly.
- Wait until touch dry (normally 3-5min) depending on drying conditions, then bring the materials together with strong even pressure.
- Care must be taken to avoid the formation of adhesive pools on the bonding surfaces. Entrapped solvent causes weak bond & blistering.
- For application on open weave or porous materials, spray apply the adhesive to avoid the adhesive bleeding through the substrate.
- Once the container is opened, the material must be used up in a short time.
Alternative Products
Need Help with SP-230 Spray Contact Adhesive - Everbond?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.