-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
X'traseal MS-609 is a high-performance, silyl-modified polymer adhesive designed for direct bonding of heavy substrates without support. Its high initial grab, UV resistance, and compatibility with porous surfaces make it ideal for thresholds, skirtings, panels, and coated metals. Non-staining, fast-curing, and paintable, it suits both internal and external construction use.- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal Gap Filla Acrylic SealantVendor:
Use Adheseal Gap Filla for sealing static or low-movement gaps in frames, cornices, and plasterboard where rigid fillers crack. Its +/- 5% flexibility prevents rework, and it's fully paintable with water clean-up for an efficient finish.
- From $3.15
- From $3.15
- Unit price
- per
-
Diggers AcetoneVendor:DiggersFast-drying solvent for cleaning PVC pipe, fibreglass tools and difficult adhesive, resin and wax residue.
- From $22.17
- From $22.17
- Unit price
- per
-
Adheseal IPA CleanerVendor:
Use Adheseal IPA Cleaner for critical surface preparation, removing oils, grime, and fluxes without leaving residue. This ensures sealants and adhesives achieve maximum bond strength and cure correctly across a wide range of surfaces.
- From $17.50
- From $17.50
- Unit price
- per
-
Methylated Spirits 95%Vendor:
Use Adheseal Methylated Spirits 95% for reliable cleaning, surface prep, and thinning specific adhesives on non-sensitive surfaces. This highly flammable and toxic liquid requires strict safety measures and prior surface testing to prevent damage or hazard.
- $146.73
- $146.73
- Unit price
- per
-
Window PackersVendor:
Horseshoe plastic window packers that slide around bolts to level and space frames and panels.
- From $48.97
- From $48.97
- Unit price
- per
-
Megapoxy 69Vendor:
Use Megapoxy 69 for structural bonding and filling where high strength and impact resistance are critical. This non-sag epoxy delivers 120MPa compressive strength and 17MPa steel-to-steel lap shear, ensuring permanent bonds in civil, marine, and heavy-duty applications.- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy PMVendor:
Use Megapoxy PM for non-sag, high-strength bonding and filling on vertical or overhead surfaces, including natural stone where a non-staining finish is critical. It delivers 80 MPa compressive strength and cures reliably even in cold or damp conditions.
- From $80.50
- From $80.50
- Unit price
- per
-
Industrial Cleaning Rags 10kgVendor:Adheseal ToolsIndustrial cleaning rags in 10kg bags: white cotton, coloured t-shirt, or white t-shirt grades.
- From $36.80
- From $36.80
- Unit price
- per
-
Handyman Cartridge Caulking Gun Type 20Vendor:Adheseal ToolsType 20 steel-framed cartridge caulking gun for maintenance sealing and trim adhesive.
- $21.99
- $21.99
- Unit price
- per
-
Single Edge Scraper Blades - 0.23mm (100 Pack)Vendor:SterlingSterling single-edge scraper blades, 0.23mm, 100-pack. For glass and windscreen prep, reinforced spine.
- From $25.09
- From $25.09
- Unit price
- per
Frequently Asked Questions
Which epoxy for joining benchtop slabs?
Megapoxy 69 or PM two-part epoxy. Pigment them to the stone, apply to clean dry faces, clamp flat, then dress the seam once cured.
What cleans acetone-safe stone surfaces?
Acetone or methylated spirits on a clean rag removes marker, adhesive residue, and grease from engineered stone before seaming. Test delicate surfaces first. Dry-fit every piece first so seams line up before any adhesive is mixed.
How do I grab a splashback without fixings?
MS 609 fast grab adhesive. It holds immediately so no props are needed, and stays flexible with bench movement. Dry-fit every piece first so seams line up before any adhesive is mixed.
What fills chips around sink cut-outs?
Pigmented Megapoxy PF flowed into the chip, then scraped flat and polished once hard. Dry-fit every piece first so seams line up before any adhesive is mixed.
Do you stock colour-matched silicone for stone joints?
MC 228 multi-colour gap sealant covers common stone tones. Order a colour chart first to match the slab. Dry-fit every piece first so seams line up before any adhesive is mixed.