-
Everflex VBS Water-based Epoxy PrimerVendor:
Everflex VBS is a two-part, water-based epoxy primer and moisture-vapour barrier for concrete, screeds and suitable masonry substrates. It helps prepare slabs and other mineral surfaces for compatible waterproofing membranes, flooring adhesives and coatings where residual substrate moisture could compromise the finish. VBS has...- $440.44
- $440.44
- Unit price
- per
-
X’traseal MS-608 MS Polymer AdhesiveVendor:
X’traseal MS-608 is a one-part MS polymer timber-flooring adhesive for bonding compatible parquetry and wood flooring to prepared subfloors. It cures to a resilient, permanently flexible bond that helps accommodate normal timber movement and provides useful sound-dampening properties.Choose MS-608 when you need a flooring-specific...
- From $10.90
- From $10.90
- Unit price
- per
-
Parquetry PS1300 Flooring AdhesiveVendor:
Parquetry PS1300 is a single-part, moisture-curing hybrid polyurethane flooring adhesive for installing parquetry, strip timber and wood-block floors over suitable prepared substrates. Spread with a notched trowel, it forms a resilient bond that accommodates natural timber movement after cure.Choose PS1300 when you are laying...
- $270.00
- $270.00
- Unit price
- per
-
Megapoxy 132 - GreyVendor:
Megapoxy 132 is a solvent-free, high-strength epoxy coating for factory and warehouse floors, commercial kitchens and food or beverage production areas. It forms a smooth, high-gloss surface that resists abrasion and is easy to keep clean. Protect and finish concrete floors Use it on...- From $195.36
- From $195.36
- Unit price
- per
-
Grey
-
Clear
-
Megapoxy 154Vendor:
Megapoxy 154 is a water-based epoxy primer and sealer for concrete and masonry, including suitably prepared damp or green concrete. It seals porous surfaces and forms a tough, matt finish, making it particularly useful when preparing a slab for a flooring system.Prime damp slabs...
- $700.00
- $700.00
- Unit price
- per
-
Megapoxy LVSVendor:
Megapoxy LVS is a clear, low-viscosity epoxy sealer and primer that soaks into porous concrete, brick, mortar, natural stone and timber. It strengthens the surface and reduces its ability to absorb moisture, oils and other contaminants.Sealing porous concrete and timberUse LVS to harden porous...
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy MC - Caribbean BlueVendor:
Megapoxy MC is a high-build epoxy maintenance coating for busy industrial floors, walls and steelwork exposed to abrasion, cleaning chemicals and everyday plant wear. Its smooth, hygienic gloss finish is suited to food and beverage factories, warehouses, workshops and wastewater infrastructure.Industrial floor, wall and...
- From $173.63
- From $173.63
- Unit price
- per
-
Caribbean Blue
-
Pacific Blue
-
Charcoal
-
Dark Grey
-
Bostik Ultraset® SF Polyurethane Flooring AdhesiveVendor:
Bostik Ultraset SF is a solvent-free, one-part polyurethane adhesive for installing parquet, solid timber, engineered and bamboo flooring. It bonds suitable timber flooring to concrete and timber subfloors while remaining flexible after cure to accommodate natural floor movement. Choose Ultraset SF for timber bonding;...- $310.40
- $310.40
- Unit price
- per
-
Ardex AF 171 Universal Vinyl AdhesiveVendor:
ARDEX AF 171 is a water-based, low-VOC universal flooring adhesive for installing vinyl sheet, luxury vinyl tiles and planks, linoleum and selected textile or rubber floor coverings. It combines strong initial grab with a durable final bond and resistance to plasticiser migration—particularly useful when...- $180.70
- $180.70
- Unit price
- per
-
Gripset C-Bed Cementitious ScreedVendor:
Gripset C-Bed is a preblended, polymer-modified cementitious floor screed for forming levels, ramps and drainage falls before tiling or installing floor finishes. Its slump-free, shrinkage-compensated formulation gives installers a consistent, shapeable alternative to batching sand and cement on site. It is suitable for internal...- $29.09
- $29.09
- Unit price
- per
-
Gripset E-60 Epoxy PrimerVendor:
Gripset E-60 Epoxy Primer is a two-component water-based epoxy primer and moisture barrier for damp or green concrete, masonry, screeds and other suitable mineral substrates. It is designed to manage residual substrate moisture and specified negative-side hydrostatic pressure before compatible waterproofing membranes, tile adhesives...
- From $106.24
- From $106.24
- Unit price
- per
-
RLA Aftek TruLevel BulkFill UTVendor:RLARLA TruLevel BulkFill UT is a rapid-setting, high-build cementitious underlayment for levelling uneven internal concrete floors before compatible final coverings. It is intended for substantial differences in floor level, with a specified build range of 3–100mm, rather than fine surface skim repairs. High-build subfloor...
- $47.39
- $47.39
- Unit price
- per
-
RLA Trulevel Econoscreed RapidVendor:RLARLA TruLevel EconoScreed Rapid is a rapid-hardening cementitious screed for forming levels, ramps and drainage falls on prepared floors. It helps shorten the interval between laying a screed and installing a compatible subsequent system. Unlike a free-flowing self-levelling compound, it is selected when installers...
- $41.48
- $41.48
- Unit price
- per
-
RLA TruLevel TuffTopVendor:RLARLA TruLevel TuffTop is a rapid-hardening cementitious levelling compound for prepared internal concrete floors where surface strength and resistance to concentrated loads matter. It can smooth uneven slabs before a suitable floor covering or topping. Unlike a deep-fill underlayment, it is positioned for durable...
- $82.01
- $82.01
- Unit price
- per
-
RLA True Level FlexiVendor:RLARLA True Level Flexi is a fibre-reinforced, flexible self-levelling compound for smoothing approved internal concrete and timber subfloors before compatible floor coverings. It is suited to stable, appropriately prepared substrates where some flexibility is required; it is not a remedy for loose timber boards...
- $103.29
- $103.29
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:RLARLA TruLevel Fine Finish is a fast-drying, cementitious skim coat for filling and smoothing small imperfections on approved internal subfloors before laying carpet, vinyl or other compatible coverings. It is intended for thin finishing applications rather than deep levelling; use BulkFill UT or another...
- From $126.07
- From $126.07
- Unit price
- per
-
RLA Moisture Seal PrimerVendor:RLARLA Moisture Seal is a two-part water-based epoxy coating used to control moisture movement through prepared concrete and compatible mineral substrates before installing suitable floor finishes, levellers or waterproofing systems. Choose it where ordinary acrylic primer does not address the moisture conditions. Its effectiveness...
- $459.03
- $459.03
- Unit price
- per
-
RLA Zinc PrimerVendor:RLARLA Zinc Primer is a one-pack zinc-rich epoxy primer used to protect properly prepared bare steel against corrosion. The zinc-rich coating provides sacrificial protection as part of a compatible coating system, making it useful for exposed metalwork, steel repairs and suitably prepared reinforcement. It...
- $147.47
- $147.47
- Unit price
- per
-
Mapei Mapecem Pronto ScreedVendor:
Mapei Mapecem Pronto is a preblended, rapid-setting cementitious mortar for constructing floor screeds when conventional sand-and-cement drying schedules would hold up the job. Because the aggregate and binder are already proportioned, installers can mix a consistent screed on site without separately batching the sand.Fast-track...- $34.30
- $34.30
- Unit price
- per
-
Mapei UC LevellerVendor:
Mapei UC Leveller is a fast-hardening cementitious levelling and smoothing compound for correcting uneven internal floors before suitable coverings are installed. Designed for application in layers from 3 to 70 mm under specified conditions, it is especially useful for larger floor areas that benefit...
- $42.37
- $42.37
- Unit price
- per
-
Mapei MapecemVendor:
Mapei Mapecem is a specialist hydraulic binder for making rapid-setting, fast-drying cementitious floor screeds on site. Unlike a ready-mixed bagged screed, Mapecem is combined with properly graded aggregate and water in the specified proportions, allowing professional installers to control the screed mix for the...
- $69.18
- $69.18
- Unit price
- per
-
Mapei Topcem Pronto SlurryVendor:
Mapei Topcem Pronto Slurry is a dedicated bonding slurry for securing compatible Topcem Pronto screeds to properly prepared concrete substrates. In a bonded screed build-up, the interface beneath the screed matters: this product creates the prescribed fresh bond coat before the screed mortar is...
- $27.44
- $27.44
- Unit price
- per
Frequently Asked Questions
What does a complete flooring installation involve?
A flooring job follows a set order. Control subfloor moisture first, form levels and falls with a screed, flatten the surface with a levelling compound, then install the finish. The finish is either a bonded covering or an epoxy coating.
In what order do I do the preparation work?
Test the concrete for moisture first. Install a moisture barrier if the reading is high. Lay a screed to form levels or build height. Apply a levelling compound to flatten the surface. Bond the covering or apply the epoxy after the base is complete.
Do I need both a screed and a levelling compound?
Not always. Use a screed when the subfloor needs a new level, a fall or significant build-up. Use a levelling compound to remove shallow dips from an already-level surface. If the slab is flat, go straight to the covering or coating.
What is the difference between a bonded floor covering and an epoxy floor?
A bonded covering is a separate material fixed to the subfloor with an adhesive. An epoxy floor is a liquid two-pack coating applied directly to prepared concrete. It cures to a hard surface. Choose the finish for the space.
What do I need to check before I start a flooring job?
Check the concrete for moisture first. A high reading means you need a moisture barrier. Then check the slab is level and smooth enough for the finish you want. Choose your covering or coating, then pick the matching adhesive, screed, or levelling compound.
How long before I can walk on a new epoxy floor?
It depends on the product, the temperature, and the humidity. Check the technical data sheet for the exact cure time of the product you choose. Do not fit furniture or bring in heavy traffic until the coating is fully cured.