-
Permabond 102Vendor:PermabondFor high-speed production lines and fast fixturing of close-fitting components, Permabond 102 provides rapid bonding of plastics, rubber, and metals. This low-viscosity ethyl cyanoacrylate polymerises quickly when pressed into a thin film between components, utilising surface moisture to initiate the cure without mixing or...
- From $42.46
- From $42.46
- Unit price
- per
-
Permabond 240Vendor:PermabondFor high-speed production lines assembling plastics, rubber, or metals, Permabond 240 is a high-viscosity cyanoacrylate that fills gaps up to 0.4 mm and prevents rapid absorption on porous substrates. It polymerises quickly when pressed into a thin film between parts, utilising surface moisture to...
- From $42.46
- From $42.46
- Unit price
- per
Filter By Products
Frequently Asked Questions
How fast does super glue set?
Fast. Permabond 102 grips plastics and rubber in 5 to 15 seconds. Full strength takes 24 hours. Set the parts right the first time. You cannot reposition them.
Thin or thick super glue, which one do I need?
Thin glue wicks into tight joints and fills gaps up to 0.15 mm. Thick glue, like Permabond 240, bridges gaps up to 0.4 mm and will not soak into porous parts.
Can super glue bond polypropylene or polyethylene?
Not on its own. These plastics need a polyolefin primer first. PVC, ABS, rubber, steel, and aluminium need no primer. Match the product spec to the job conditions before you start.
How do I glue MDF or timber without clamps?
Use the Ninja MDF two-part system. Spray the activator on one face, spread the glue on the other, then press for 2 to 3 seconds. The joint holds at once.
How do I store cyanoacrylate adhesive?
Keep it between 2°C and 7°C. Let the bottle reach room temperature before you open it. This stops moisture curing the contents. Match the product spec to the job conditions before you start.
How do I remove uncured super glue?
Wipe it with acetone or a cyanoacrylate solvent. Clean the excess right away. Cured glue must be scraped or cut off. Match the product spec to the job conditions before you start.