-
FATRAFOL 804Vendor:FatraFATRAFOL 804 is an unreinforced PVC-P detail membrane used as an auxiliary component within reinforced FATRAFOL roofing systems. It is intended for finishing construction details, parapets, penetrations, cross-joints and complex roof areas and is not intended to form the main full-area waterproofing layer. Compare...
- From $960.00
- From $960.00
- Unit price
- per
-
FATRAFOL 807/VVendor:FatraFATRAFOL 807/V is a PVC-P roofing membrane with a non-woven PES textile backing for fully adhered roof waterproofing systems. It is designed for bonding to suitable insulation or rigid roof substrates, offers long-term UV and weather resistance and is not intended for bonding directly...
- From $1,674.64
- From $1,674.64
- Unit price
- per
-
FATRAFOL 810/V (810)Vendor:FatraFATRAFOL 810/V (810) is a polyester-scrim-reinforced PVC-P roof waterproofing membrane for mechanically fastened systems. It is designed to remain exposed to weather, with strong resistance to UV radiation, wind suction and normal roof-environment stresses. Compare waterproofing systems: Browse the full waterproofing membrane range to...
- From $1,504.00
- From $1,504.00
- Unit price
- per
-
Fatrabond 1214 Roller Applied Polyurethane Adhesive 20LVendor:FatraFatrabond 1214 is a moisture-curing polyurethane adhesive for sticking felt-backed Fatrafol membranes to concrete, plywood, fibre cement, insulation board, and steel. Applied to one side only with a roller, then the membrane goes on while it is still tacky.It hardens fast once the membrane...
- $936.00
- $936.00
- Unit price
- per
-
Fatra PVC Coated AngleVendor:FatraFatra PVC Coated Angle covers the Fatranyl PVC-coated metal profiles used to terminate and detail Fatrafol PVC waterproofing membranes. The coated surface can be hot-air welded into the compatible PVC membrane system, giving the installer a purpose-made edge, peel-stop, chase, flashing or fold profile...
- From $351.90
- From $351.90
- Unit price
- per
-
Leister Triac AT Heat GunVendor:LeisterThe Leister TRIAC AT is a digitally controlled heat gun for thermoplastic welding and forming. Set the temperature anywhere from 40 to 620 degrees and the digital control holds it there, even on site generators that would make a basic gun wander.Eco-Mode and a...
- $2,390.00
- $2,390.00
- Unit price
- per
-
Leister Triac ST Heat GunVendor:LeisterThe Leister TRIAC ST is the analogue workhorse of membrane welding: 1600W, stepless heat from 40 to 700 degrees, and 0.99kg in the hand, which is why roofers pick it for a full day of overlap welding.No digital screen to fail: the Swiss analog...
- $1,794.70
- $1,794.70
- Unit price
- per
-
Leister UNIDRIVE 500 Semi-Automatic Welding MachineVendor:LeisterThe Leister UNIDRIVE 500 welds roof seams by machine at up to 4.5 metres a minute, around three times faster than doing it by hand, at a pressure your wrist cannot hold for an hour. At 4.5kg it still goes where the big machines...
- $10,179.60
- $10,179.60
- Unit price
- per
Frequently Asked Questions
What is Fatrafol 810v?
A reinforced PVC roofing membrane engineered for single-ply flat roofing. It is mechanically anchored and UV resistant, and it installs only by trained professionals because the seams carry the roof.
Which Fatrafol suits an unreinforced application?
Fatrafol 804, the unreinforced grade, suits detailing and applications where reinforcement is not required. Reinforced 807V and 810v carry the mechanical loads on main roof fields.
What adheres Fatrafol membrane to the deck?
Fatrabond 1214, a roller-applied polyurethane adhesive made for the system. Using the matched adhesive keeps the membrane warranty intact. Match the product spec to the job conditions before you start.
Are prefabricated details available?
Yes. Prefabricated corners, coated angles, and fixing bars cover the transitions where hand-formed details fail, and Fatra rainwater outlets tie drainage into the sheet cleanly.
Can my regular roofer install Fatrafol?
No. The manufacturer requires trained specialist installers for Fatrafol roofing membranes. Hot-air welding PVC seams is a certified skill, not a general-roofing one.