-
Aluminium Angle Unequal 25x12Vendor:
Aluminium Angle Unequal 25x12 is a 6060 T5 mill-finish aluminium L-section with 25 × 12 mm unequal legs. The unequal 25 × 12 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...- $7.46
- $7.46
- Unit price
- per
-
Aluminium Angle Unequal 32x20Vendor:
Aluminium Angle Unequal 32x20 is a 6060 T5 mill-finish aluminium L-section with 32 × 20 mm unequal legs. The unequal 32 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $13.64
- From $13.64
- Unit price
- per
-
Aluminium Angle Unequal 40x20Vendor:
Aluminium Angle Unequal 40x20 is a 6060 T5 mill-finish aluminium L-section with 40 × 20 mm unequal legs. The unequal 40 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $16.52
- From $16.52
- Unit price
- per
-
Aluminium Angle Equal 40x40Vendor:
Aluminium Angle Equal 40x40 is a 6060 T5 mill-finish aluminium L-section with 40 × 40 mm equal legs. The equal 40 × 40 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- $20.28
- $20.28
- Unit price
- per
-
Aluminium Angle Unequal 50x25Vendor:
Aluminium Angle Unequal 50x25 is a 6060 T5 mill-finish aluminium L-section with 50 × 25 mm unequal legs. The unequal 50 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $17.23
- From $17.23
- Unit price
- per
-
Aluminium Angle Unequal 50x40Vendor:
Aluminium Angle Unequal 50x40 is a 6060 T5 mill-finish aluminium L-section with 50 × 40 mm unequal legs. The unequal 50 × 40 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $22.41
- From $22.41
- Unit price
- per
-
Aluminium Angle Equal 50x50Vendor:
Aluminium Angle Equal 50x50 is a 6060 T5 mill-finish aluminium L-section with 50 × 50 mm equal legs. The equal 50 × 50 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $25.40
- From $25.40
- Unit price
- per
-
Aluminium Angle Unequal 60x25Vendor:
Aluminium Angle Unequal 60x25 is a 6060 T5 mill-finish aluminium L-section with 60 × 25 mm unequal legs. The unequal 60 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $43.01
- $43.01
- Unit price
- per
-
Aluminium Angle Unequal 70x25Vendor:
Aluminium Angle Unequal 70x25 is a 6060 T5 mill-finish aluminium L-section with 70 × 25 mm unequal legs. The unequal 70 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $15.73
- $15.73
- Unit price
- per
-
Aluminium Angle Equal 76x76Vendor:
Aluminium Angle Equal 76x76 is a 6060 T5 mill-finish aluminium L-section with 76 × 76 mm equal legs. The equal 76 × 76 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $133.03
- From $133.03
- Unit price
- per
-
Aluminium Angle Unequal 100x50Vendor:
Aluminium Angle Unequal 100x50 is a 6060 T5 mill-finish aluminium L-section with 100 × 50 mm unequal legs. The unequal 100 × 50 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $56.43
- From $56.43
- Unit price
- per
Frequently Asked Questions
Which angle size suits protecting a sheet edge?
Match the short leg to the sheet thickness plus adhesive bed, and the long leg to how far back you want protection on the face. Unequal angles (25x12, 40x20) exist exactly for this.
Can aluminium angle be used externally?
Yes. Aluminium corrodes far slower than steel outdoors, and the anodised finish holds against weather on balconies and facades. Match the product spec to the job conditions before you start.
How do I fix the angle - glue or screws?
Both work: construction adhesive (MS or PU) avoids puncturing the surface behind; rivets or screws suit structural corners. On waterproofed surfaces, prefer adhesive to keep the membrane unbroken.
Does the range include equal-leg angles?
Yes: 40x40 and 50x50 cover corner and frame builds where both faces show equally. Match the product spec to the job conditions before you start.
What grade of aluminium are these?
Mill finish structural-grade aluminium suited to trim, edging, and light protective duty indoors and under cover, cut and drilled with normal hand tools on site.
Can I bend or cut them on site?
Cut yes, with a fine-tooth saw and a deburr afterwards. Bending is not recommended: the alloy cracks rather than forms, so order the right profile instead.