Aluminium Angle Unequal 50 × 25 gives a 50mm covering leg and a 25mm return. It is a practical mill-finish L-section for suitable panel corners, fabrication edges and shopfitting or caravan trim where one surface needs twice the coverage of the other.
Choose 50 × 25mm when a 40 × 20mm angle would leave too little of the main face covered. If you want the same 50mm on both sides, look at 50 × 50mm equal angle instead. Its stock thickness options let the installer match the specific fabrication without changing the profile geometry.
| Leg dimensions | 50 × 25 mm |
|---|---|
| Geometry | Unequal angle |
| Alloy / temper | 6060 T5 |
| Finish | Mill finish |
| Current stock | 1.6 mm × 2165 mm or 3.0 mm × 2165 mm |
Variants: 1.6mm or 3.0mm thick, each 2165mm long. Check the minimum fixing width available on the 25mm side and the required overlap on the 50mm side.
Cut and deburr carefully, then prepare the mill finish for the selected adhesive, fastener or coating. This extrusion is not a rated bracket or a substitute for a drip-edge waterproofing profile.
What stock options are available in 50 × 25 mm aluminium angle?
Current Adheseal stock is 1.6 mm × 2165 mm or 3.0 mm × 2165 mm, supplied in 6060 T5 mill finish.
Aluminium Angle Unequal 50x25 Physical Properties
| Property | Value |
|---|---|
| Alloy | 6060 |
| Temper | T5 |
| Finish | Mill Finish |
| Form | Angle Extrusion |
| Strength to Weight Ratio | High |
| Corrosion Resistance | Excellent |
| Weldability | Excellent |
| Machinability | Good |
| Lengths Available | Varies by size |
| Processing Capabilities | Cutting, drilling, welding, anodising, powder coating, painting |
| Typical Applications | Vehicle body building, caravans, aerospace, shopfitting, frames, architectural frameworks |