-
Great Aussie Tradie Cleanup WipesVendor:Great Aussie WipesUse Great Aussie Tradie Cleanup Wipes for industrial-strength removal of bitumen, sealants, and grease. They are 100% plastic-free, compostable, and feature a non-scratch formula to prevent surface damage.
- From $25.00
- From $25.00
- Unit price
- per
-
Industrial Cleaning Rags 10kgVendor:Adheseal ToolsUse Rags for critical cleaning and polishing where lint and colour transfer are unacceptable. The premium white recycled cotton ensures a streak-free, colour-safe finish on delicate surfaces, preventing rework.
- From $36.80
- From $36.80
- Unit price
- per
Frequently Asked Questions
What are joint-preparation wipes used for?
Preparation wipes remove dust, dirt and residue from the bond area before primer or sealant is applied. A clean, dry surface improves wetting and reduces contamination in the joint. Use a fresh section of wipe, follow the sealant system’s solvent instructions and allow the surface to dry before continuing.
Can wipes replace a solvent?
Wipes may remove light surface contamination, but they do not replace a specified cleaner or solvent in every system. Heavy residue, oils or adhesive contamination may require a compatible cleaning solvent. Follow the product technical data and use only materials approved for the substrate and sealant system.
How do I prepare a joint before caulking?
Remove loose material, dust and failed sealant, then clean the bond faces and allow them to dry. Protect adjacent finishes where needed. If the joint requires backing rod or primer, install and apply those materials according to the system instructions before extruding the sealant bead.
Can I use the same wipe for every surface?
No. Some solvents or wipe materials can damage plastics, coatings, painted surfaces or sensitive finishes. Confirm compatibility with the substrate and test an inconspicuous area where risk is high. Use lint-free materials and avoid transferring contamination back onto the prepared joint.
When is the surface ready for sealant?
The surface is ready when it is sound, clean, dry and free from residues that could interfere with adhesion. Primer, if specified, must also be applied and dried within its working window. Do not apply sealant over condensation, visible solvent or loose dust.
- Choosing a selection results in a full page refresh.