-
Adheseal S100 Sanitary Silicone SealantVendor:
Adheseal S100 is our flagship sanitary silicone sealant for bathrooms, showers, kitchens and tiled wet areas. This neutral-cure, anti-fungal silicone is designed for the joints that see daily moisture and movement, including tiled corners, shower screens, baths, basins, sinks, sanitary ware, benchtops and splashbacks....- From $6.86
$0.00- From $6.86
- Unit price
- per
-
Matt Seal S-350 Sanitary Silicone SealantVendor:
Matt Seal S-350 Sanitary Silicone Sealant is a neutral-cure, mould-resistant silicone with a low-sheen matt finish for modern bathrooms, showers, kitchens, laundries and other tiled wet areas. It is designed for projects where a traditional glossy silicone bead would stand out against matt tiles,...
- From $6.86
- From $6.86
- Unit price
- per
-
X'traseal MC-228 Tiling SealantVendor:
For sealing and finishing tile gaps on floors, walls, and countertops where a durable, water- and mildew-proof joint is required, X'traseal MC-228 Tiling Sealant delivers a high-gloss finish that matches the appearance of porcelain. Formulated with nano-tech polymer technology and high-end pigments, this two-part...
- From $15.65
- From $15.65
- Unit price
- per
-
Everflex Aqua-Ban Elastomeric Waterproof MembraneVendor:
Everflex Aqua-Ban is a single-component, water-based SBR Class III membrane for under-tile bathrooms, showers, balconies and decks. Its micro-fibre reinforcement and anti-microbial formulation create a flexible seamless barrier for wet-area systems that will be covered by compatible finishes. Compare waterproofing systems: Browse the full...
- $140.53
- $140.53
- Unit price
- per
-
Everflex Multi-Prime Acrylic PrimerVendor:
For prep work on substrates with varying absorption rates, Everflex Multi-Prime Acrylic Primer is a single-part, water-based acrylic primer that stabilises both porous and non-porous surfaces. It is formulated to prepare substrates for the application of Everflex waterproofing membranes, self-levelling compounds, cement-based ceramic tile...
- From $71.69
- From $71.69
- Unit price
- per
-
Everflex WPM Class III Under-Tile Waterproofing MembraneVendor:
Everflex WPM is a Class III liquid waterproofing membrane for bathrooms, showers, balconies and decks where the finished membrane will be protected by tile, screed or another approved finish. Its highly flexible, seamless film is intended for internal and external under-tile waterproofing systems. Compare...
- $176.09
- $176.09
- Unit price
- per
-
Everflex Primer WBPVendor:
For porous wall and floor substrates prior to tiling, levelling, or waterproofing, Everflex Primer WBP is a water-based, penetrating acrylic primer designed to seal the surface, enhance adhesion, and prevent blistering and pinholes in subsequent coatings. What it does Everflex Primer WBP penetrates porous...
- From $48.26
- From $48.26
- Unit price
- per
-
Polyurethane HobsVendor:
A pre-formed polyurethane shower hob, 1200mm x 75mm x 50mm, that replaces the old timber-and-screed hob build. Light enough to carry one-handed, cut with a hand saw, and ready for waterproofing membrane straight after fixing.Fix it to the slab, corner-seal it, and membrane over...
- From $9.46
- From $9.46
- Unit price
- per
-
B.A.T PVC Waterproofing AngleVendor:B.A.TB.A.T PVC Waterproofing Angle is a white PVC angle profile used to form a defined barrier at the edge of wet-area waterproofing systems. Although it is a plastic angle by material, its intended role is waterproofing termination rather than structural framing, general corner protection...
- From $18.67
- From $18.67
- Unit price
- per
-
Anodized Aluminum Balcony Drip Angle (12mm x 5m)Vendor:
B.A.T 12 mm Anodised Aluminium Balcony Drip Angle is a 5 m balcony drip edge for longer tiled or rendered balcony runs. Its drip lip projects runoff clear of the fascia, cladding or render below, helping stop water tracking back beneath the balcony edge....
- From $25.97
- From $25.97
- Unit price
- per
-
Balcony Drip Angle 90° Internal CornerVendor:
Balcony Drip Angle 90° Internal Corner is a pre-formed internal corner for the B.A.T 12 mm anodised aluminium balcony drip-angle system. It maintains the perimeter profile through a 90° inside turn without a site-made mitre. The matching component keeps the drip-edge geometry and finished...
- $25.97
- $25.97
- Unit price
- per
-
Bostik 6S Silicone SealantVendor:
Bostik 6S Neutral Cure Silicone is a premium sanitary and tile silicone sealant for bathrooms, kitchens, laundries, shower screens and wet-area tiling. It contains mould and mildew inhibitors, cures with low odour and forms a flexible waterproof seal around tiles, sanitary ware, glass and...- From $180.00
- From $180.00
- Unit price
- per
-
ARDEX X 17 Tile AdhesiveVendor:
ARDEX X 17 is a flexible, polymer-fortified, non-slump wall and floor tile adhesive for residential and light commercial tiling. Its mastic-style workability and extended open time make it especially useful for large-format and heavy tiles that need reliable grab on walls without sacrificing working...- From $33.58
$25.59- From $33.58
- Unit price
- per
-
ARDEX X 18 Tile AdhesiveVendor:
ARDEX X 18 is a fibre-reinforced, flexible, non-slump wall and floor tile adhesive for demanding residential and commercial tiling. Compared with general-purpose adhesives, X 18 is positioned for higher-demand work including swimming pools, wet areas, commercial floors and installations using large or heavy tiles....
- $52.50
- $52.50
- Unit price
- per
-
ARDEX X 56 Tile AdhesiveVendor:
ARDEX X 56 is a fast-setting, highly flexible S2 tile adhesive for projects where movement and turnaround time are the main challenges. It is specifically positioned for tiling directly to suitable internal timber, over heated slabs and on early-age concrete, screeds and renders without...
- $136.96
- $136.96
- Unit price
- per
-
ARDEX X 68 Tile AdhesiveVendor:
ARDEX X 68 is an ultralight, flexible, non-slump wall and floor tile adhesive built around a sand-free, extended-coverage formula. The 11kg bag is designed to be easier to transport, mix and spread while still covering demanding internal and external tiling, including wet areas and...
- $41.87
$34.35- $41.87
- Unit price
- per
-
ARDEX FG 8 Flexible Tile GroutVendor:
ARDEX FG 8 is a smooth, flexible coloured cement-based grout for wall and floor tile joints from 1mm to 8mm. Polymer fortification helps reduce cracking, while ARDEX highlights strong colour consistency, mould resistance and water repellence for clean, durable joints in internal and external...
- From $28.09
- From $28.09
- Unit price
- per
-
ARDEX FS-DD Fine Tile GroutVendor:
ARDEX FS-DD is a non-sanded, fine tile grout for wall and floor joints from 1mm to 4mm. It is specially suited to polished porcelain and other scratch-sensitive tile surfaces, with water-repellent and dirt-resistant performance plus ARDEX Grout Shield to help combat mould growth. Compare...
- $32.13
- $32.13
- Unit price
- per
-
Ardex Grout BoosterVendor:
When grouting tiles on timber floors, plasterboard, chipboard, or heated sub-floors, standard cement-based grouts risk cracking under structural movement. ARDEX Grout Booster replaces or dilutes the mixing water to build high-grade polymer flexibility, water repellency, and adhesion into cement-based ARDEX grouts across floor and...
- $68.72
- $68.72
- Unit price
- per
-
Ardex Multiprime PrimerVendor:
For porous substrates including CFC sheet, concrete, masonry, and jointing compound over plasterboard, ARDEX Multiprime prepares the surface to improve the adhesion of subsequent approved ARDEX products. This water-based liquid primer dries quickly in both internal and external applications, providing a reliable bond interface...
- $301.48
- $301.48
- Unit price
- per
-
Gripset C-Bed Cementitious ScreedVendor:
Gripset C-Bed is a preblended, polymer-enhanced cementitious screed for creating floor levels, ramps, shower bases and falls before waterproofing or tiling. It combines graded aggregate, cement and performance modifiers in one bag, giving installers a consistent alternative to site-batched sand-and-cement screeds. Where C-Bed fits...- $29.09
- $29.09
- Unit price
- per
-
Gripset GP PrimerVendor:
For porous building substrates where preparation is required before waterproofing or tiling, GP Primer consolidates the surface and stabilises porosity. It forms a high-adhesion bonding key across porous materials, ensuring that Gripset waterproof membranes and tile adhesives adhere reliably without premature water loss into...
- From $87.36
- From $87.36
- Unit price
- per
-
Gripset OP PrimerVendor:
For waterproofing and tiling installations where adhesion to metal flashings, rigid PVC leak control flanges, ceramic tiles, or smooth concrete is required, OP Primer provides a solvent-free bonding bridge. It establishes a secure grip on difficult, non-porous surfaces to prevent Gripset membranes and tile...
- From $160.32
- From $160.32
- Unit price
- per
-
Gripset 38FCVendor:
Gripset 38FC is a fast-curing, fibre-reinforced SBR latex waterproofing membrane for internal and external areas that will be covered by tiles, toppings or other approved finishes. Gripset lists recoat from about one hour, tiling or toppings from about four hours and flood testing from...
- From $93.63
- From $93.63
- Unit price
- per
-
Gripset P39Vendor:
Gripset P39 is a fibre-enhanced polyurethane-hybrid waterproofing membrane for exposed or under-tile applications. It is highly flexible, UV and weather resistant, handles early ponding and permanently wet conditions after cure, and can serve as a light-foot-trafficable finish on suitable external areas. Compare waterproofing systems:...
- $232.47
- $232.47
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Gripset Xpress Multi Pro is a fast-cure, water-based elastomeric waterproofing membrane for exposed and under-tile applications. It is designed to resist early rain and ponding, remain stable in permanently wet conditions after cure and provide a UV-resistant, light-foot-trafficable finish on suitable external areas. Compare...
- $389.93
- $389.93
- Unit price
- per
-
Gripset BRW PFNVendor:
Gripset BRW PFN is a self-adhesive, fibre-faced butyl-rubber sheet membrane for internal and external floor waterproofing. The fabric-laminated face accepts compatible toppings and tiled finishes, while the butyl backing provides immediate adhesion and strong resistance to movement, vibration and cracking. Compare waterproofing systems: Browse...
- $481.10
- $481.10
- Unit price
- per
-
Gripset XpressLayVendor:
Gripset XpressLay is a high-strength, reinforced self-adhesive PVC underlay combining waterproofing, anti-fracture and decoupling functions for internal wet-area floors and tiled substrates. Its cold-applied sheet format is designed for rapid installation over suitable concrete, timber, fibre-cement, tile and other approved surfaces. Compare waterproofing systems:...
- $578.97
- $578.97
- Unit price
- per
-
Gripset C-Mastic Tile AdhesiveVendor:
Gripset C-Mastic is a premium white, respirable-silica-free polymer-modified tile adhesive for large-format, general wall and floor, and immersed tiling. Its C2S1TE performance gives tilers high bond strength, non-slump control and deformability across demanding internal and external installations. Compare tile adhesives: See our complete tile...
- $35.64
- $35.64
- Unit price
- per
-
Gripset C-Rubber Tile AdhesiveVendor:
Gripset C-Rubber is an economical, rubber-filled polymer-modified tile adhesive for internal and external wall and floor tiling. It combines C2TES1 performance, flexibility, non-slump properties and extended open time with a respirable-silica-free formulation, making it a practical choice for general trade tiling and wet-area work....
- $43.31
- $43.31
- Unit price
- per
-
Gripset C-Lite Tile AdhesiveVendor:
Gripset C-Lite is a premium C2TES2 high-performance tile adhesive for commercial, large-format and high-movement installations. Its lightweight polymer technology combines strong flexibility, non-slump performance and extended open time with suitability for internal, external and immersed tiling. Compare tile adhesives: See our complete tile adhesive...
- $45.47
- $45.47
- Unit price
- per
-
RLA Luminous SSG Tile GroutVendor:RLARLA Luminous SSG is a high-performance standard-set tile grout for internal and external joints from 1.5mm to 15mm. Its smooth, shrinkage-compensated formulation combines water and mould resistance with reduced water absorption, good colour uniformity and a respirable-silica-free formulation. Compare tile grouts: Browse the full...
- From $26.40
- From $26.40
- Unit price
- per
-
RLA Trulevel Econoscreed RapidVendor:RLARLA TruLevel EconoScreed Rapid is a preblended rapid-hardening cementitious screed for forming levels, ramps and falls where the floor programme cannot wait for a traditional site-mixed screed to dry. It is intended for residential, commercial and medium-duty flooring preparation before compatible waterproofing or floor...
- $41.48
- $41.48
- Unit price
- per
-
RLA Universal PrimerVendor:RLAFor preparing floors prior to tiling or self-levelling, RLA Universal Primer provides a rapid-drying, solvent-free acrylic bond coat over both absorbent and dense surfaces. It creates a secure key for cement-based ceramic tile adhesives and levelling compounds over substrates including water-based painted surfaces, burnished...
- From $121.14
- From $121.14
- Unit price
- per
-
RLA Moisture Seal PrimerVendor:RLAFor subfloors and walls showing signs of rising damp, or green concrete slabs that need immediate coating, RLA Moisture Seal Primer acts as a two-part water-based epoxy barrier to block moisture vapour transmission and prevent subsequent floor finishes from blistering, bubbling, or delaminating. It...
- $459.03
- $459.03
- Unit price
- per
-
RLA Polymastic Pre-Mixed Tile AdhesiveVendor:RLARLA Polymastic is a white, flexible, pre-mixed acrylic wall tile adhesive for internal tiling. Its D1TE classification, non-slump body and ready-to-use consistency make it a straightforward choice for porous ceramic, mosaic and suitable large-format wall tiles where installers want to avoid powder mixing. Compare...
- $112.91
- $112.91
- Unit price
- per
-
RLA 2 Part Cementitious Waterproofing MembraneVendor:RLARLA 2 Part is a two-part flexible cementitious waterproofing membrane based on fast-setting high-alumina cement and a high-solids acrylic liquid. It is designed as an under-tile Class II system for balconies, roofs, wet areas and selected swimming-pool applications with strong adhesion to concrete, screeds...
- $251.23
- $251.23
- Unit price
- per
-
Mapesil AC Silicone SealantVendor:
Mapei Mapesil AC is a pure, solvent-free acetic silicone sealant for ceramic tiles, bathrooms, kitchens, wet areas and swimming pools. It combines high flexibility with mould-resistant BioBlock technology and is available in an extensive colour range coordinated with Mapei grouts. Mapesil AC is the...- From $172.56
- From $172.56
- Unit price
- per
-
Mapei Primer GVendor:
When tiling over gypsum plaster, pre-cast gypsum panels, or anhydrite screeds, Primer G prevents the chemical reaction between substrate sulphates and cementitious adhesives. By isolating these incompatible materials, it stops the formation of ettringite crystals, which otherwise cause the tile adhesive or smoothing compound...
- From $57.91
- From $57.91
- Unit price
- per
-
Mapei Eco Prim T Plus PrimerVendor:
For interior floor preparation where levelling compounds or cementitious adhesives must bond reliably to both absorbent and non-absorbent surfaces, Eco Prim T Plus Primer establishes a high-adhesion keyway. This solvent-free acrylic resin-based primer in water dispersion prepares challenging substrates—including very compact concrete, old adhesive...
- From $103.16
- From $103.16
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Mapei Kerapoxy Easy Design is a two-component decorative epoxy grout for 1-15mm joints that can also be used as an R2T epoxy adhesive. It is designed for tiled walls, floors, showers, bathrooms, swimming pools and high-hygiene commercial areas where a smooth, non-absorbent, chemical-resistant finish...
- $100.28
- $100.28
- Unit price
- per
-
Mapei Keracolor FF Tile GroutVendor:
Mapei Keracolor FF is a high-performance polymer-modified cementitious grout for tile joints up to 6mm. Classified CG2WA to AS ISO 13007-3, it combines low water absorption and high abrasion resistance with Mapei DropEffect water-repellent and BioBlock mould-resistant technologies. Compare tile grouts: Browse the full...
- From $15.33
$19.17- From $15.33
- Unit price
- per
-
Mapei Keracolor GG Wide Joint GroutVendor:
Mapei Keracolor GG is a high-performance polymer-modified cementitious grout for tile and stone joints from 4mm to 15mm. Its CG2WA performance, graded aggregate structure and low-shrink formulation make it particularly well suited to wider joints, rustic finishes, external tiling and commercial floors. Compare tile...
- From $27.98
- From $27.98
- Unit price
- per
-
Mapei Mapecem Pronto ScreedVendor:
Mapei Mapecem Pronto is a ready-to-use, preblended rapid-drying screed mortar for interior and exterior floors. Unlike Mapecem binder, the aggregate is already proportioned in the bag, so the installer adds the specified water and places the screed without sourcing or grading sand on site....
- $34.30
- $34.30
- Unit price
- per
-
Mapei MapecemVendor:
Mapei Mapecem is a special rapid-setting hydraulic binder used to make controlled-shrinkage, fast-drying screeds with graded aggregate and water mixed on site. It is not a preblended screed mortar: the installer controls the aggregate component within Mapei’s specified mix design. Where Mapecem fits New...
- $69.18
- $69.18
- Unit price
- per
-
Mapei Keraflex Maxi S1 Tile AdhesiveVendor:
Mapei Keraflex Maxi S1 is a high-performance C2TES1 deformable cementitious tile adhesive developed for large-format porcelain, ceramic and stable natural stone. Its S1 deformability, extended open time and no-vertical-slip performance make it especially useful where large or heavy tiles, heated floors, irregular substrates or...
- From $43.33
- From $43.33
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Mapei Kerapoxy Adhesive is a two-component R2T epoxy tile adhesive for demanding wall and floor installations where chemical resistance, high bond strength and no vertical slip are required. It is suited to ceramic, porcelain and compatible stone, including specialist wet-area and swimming-pool applications such...
- $181.98
- $181.98
- Unit price
- per
-
Mapei Topcem Pronto SlurryVendor:
To ensure a reliable bond when installing a Topcem Pronto bonded engineered screed, Topcem Pronto Slurry creates the critical interface on concrete substrates. It is formulated for both indoor and outdoor use to secure the screed layer directly to the prepared base. How it...
- $27.44
- $27.44
- Unit price
- per
-
Mapei Mapeband Easy Joint TapeVendor:
Mapei Mapeband Easy is a 130 mm elastic waterproofing joint tape for wall-to-floor junctions, wall corners and control joints within compatible MAPEI liquid waterproofing systems. It has a waterproof, vapour-proof rubber core between non-woven polypropylene faces, with a published thickness of 0.68 mm and...
- $118.48
- $118.48
- Unit price
- per
-
Mapei UltraCare Kerapoxy CleanerVendor:
Mapei UltraCare Kerapoxy Cleaner is a ready-to-use cleaner for fresh epoxy grout residue and post-installation haze from compatible porcelain, glazed ceramic and glass mosaic surfaces. It is specifically formulated for Mapei epoxy grouts including Kerapoxy and Kerapoxy Easy Design. Epoxy grout cleaner for Kerapoxy...
- From $39.04
- From $39.04
- Unit price
- per
Frequently Asked Questions
What does a tiling job include?
A tiling job can include substrate preparation, priming, drainage, waterproofing, tile setting, edge finishing, grouting and joint sealing. Work through each step in the order your approved tile system requires.
When do I need waterproofing before tiling?
Use a tanking membrane where the tiled area is a wet area or the specified system needs an under-tile waterproof layer. Install drainage and prepare the substrate before the membrane.
What is the difference between grouting and sealing?
Grout fills tile joints after the adhesive has cured. Sealant is used later at movement joints and sanitary edges, where a flexible joint is needed.
Why is drainage a separate tiling step?
A floor waste or linear channel must be selected and installed before the tile finish is set. This lets the tile layout and falls work with the drainage outlet.
How do I choose the right tile adhesive?
Match the adhesive to the tile, the substrate, and the job exposure. Ready-mixed adhesives suit small domestic repairs. Powder adhesives mix on site and handle larger areas or wet-room work. Check the product data for the tile types and substrates each adhesive covers.
Which silicone sealant fits my job?
Pick the sealant by the joint and the exposure. Kitchen and bath silicone handles wet interior joints. Sanitary silicone resists mould at bath and shower edges. Multi-colour flexi-gap sealant fills colour-matched movement joints.