-
ARDEX X 17 Tile Adhesive - WhiteVendor:
ARDEX X 17 is a flexible, polymer-fortified, non-slump wall and floor tile adhesive for residential and light commercial tiling. Its mastic-style workability and extended open time make it especially useful for large-format and heavy tiles that need reliable grab on walls without sacrificing working...- From $33.58
$25.59- From $33.58
- Unit price
- per
-
White
-
Grey
-
ARDEX X 18 Tile Adhesive - WhiteVendor:
ARDEX X 18 is a fibre-reinforced, flexible, non-slump wall and floor tile adhesive for demanding residential and commercial tiling. Compared with general-purpose adhesives, X 18 is positioned for higher-demand work including swimming pools, wet areas, commercial floors and installations using large or heavy tiles....
- $52.50
- $52.50
- Unit price
- per
-
White
-
Grey
-
ARDEX X 56 Tile AdhesiveVendor:
ARDEX X 56 is a fast-setting, highly flexible S2 tile adhesive for projects where movement and turnaround time are the main challenges. It is specifically positioned for tiling directly to suitable internal timber, over heated slabs and on early-age concrete, screeds and renders without...
- $136.96
- $136.96
- Unit price
- per
-
ARDEX X 68 Tile AdhesiveVendor:
ARDEX X 68 is an ultralight, flexible, non-slump wall and floor tile adhesive built around a sand-free, extended-coverage formula. The 11kg bag is designed to be easier to transport, mix and spread while still covering demanding internal and external tiling, including wet areas and...
- $41.87
$34.35- $41.87
- Unit price
- per
-
Gripset C-Mastic Tile AdhesiveVendor:
Gripset C-Mastic is a premium white, respirable-silica-free polymer-modified tile adhesive for large-format, general wall and floor, and immersed tiling. Its C2S1TE performance gives tilers high bond strength, non-slump control and deformability across demanding internal and external installations. Which Gripset tile adhesive? Choose C-Mastic when...- $35.64
- $35.64
- Unit price
- per
-
Gripset C-Rubber Tile AdhesiveVendor:
Gripset C-Rubber is an economical, rubber-filled polymer-modified tile adhesive for internal and external wall and floor tiling. It combines C2TES1 performance, flexibility, non-slump properties and extended open time with a respirable-silica-free formulation, making it a practical choice for general trade tiling and wet-area work....
- $43.31
- $43.31
- Unit price
- per
-
Gripset C-Lite Tile AdhesiveVendor:
Gripset C-Lite is a premium white C2TES2 tile adhesive for large-format tiles, heated floors and installations requiring high flexibility. Its non-slump performance and extended open time suit internal and external walls and floors, including compatible pools, spas and water features. Why choose C-Lite? Its...
- $45.47
- $45.47
- Unit price
- per
-
RLA Polymastic Pre-Mixed Tile AdhesiveVendor:RLARLA Polymastic is a ready-mixed D1TE acrylic adhesive for installing suitable ceramic and mosaic tiles on prepared internal walls. Its non-slip consistency helps hold tiles in position without mixing a powder adhesive, making it a practical choice for kitchen splashbacks and similar wall-tiling work....
- $112.91
- $112.91
- Unit price
- per
-
Mapei Keraflex Maxi S1 Tile Adhesive - WhiteVendor:
Mapei Keraflex Maxi S1 is a high-performance, polymer-modified cementitious tile adhesive designed for large-format ceramic and porcelain tiles and suitable natural stone. Its combination of S1 deformability, extended open time and reduced vertical slip gives tilers a practical way to position larger, heavier tiles...- From $43.33
- From $43.33
- Unit price
- per
-
White
-
Grey
-
Mapei Kerapoxy AdhesiveVendor:
Mapei Kerapoxy Adhesive is a two-component epoxy tile adhesive developed for installations where a conventional cement-based adhesive may not provide the chemical resistance or bonding performance required. Its thixotropic, no-vertical-slip consistency helps hold ceramic, porcelain and suitable stone in position while installing on walls,...
- $181.98
- $181.98
- Unit price
- per
-
B.A.T Bright Steel Square Notch TrowelVendor:B.A.TA square notch trowel for ceramic, porcelain, and stone adhesive beds. The square notch combs full ribs that collapse evenly under the tile, which is what pushes air out and coverage up.Bright steel blade, sizes from 4mm to 12mm. Match the notch to the...
- $25.00
$0.00- $25.00
- Unit price
- per
-
BAT Professional Stainless Steel TrowelVendor:B.A.TA stainless square notch trowel for tile adhesive beds, in notch sizes from 4mm to 15mm. Pick the size the adhesive datasheet calls: the notch sets how much adhesive goes down, and coverage is where bond failures start.Stainless shrugs off cement mortars and will...
- $29.17
$0.00- $29.17
- Unit price
- per
-
BAT Pro Gauging Trowel with Swan NeckVendor:B.A.TA small trowel for moving adhesive and grout from bucket to bed or hawk. The carbon steel blade is stiff enough to scoop dense materials without flexing, and the pointed shape loads a clean cut of mix.The swan neck in the handle hooks over...
- From $12.50
- From $12.50
- Unit price
- per
-
BAT PRO Square Trowel With Swan NeckVendor:B.A.TA flat square trowel for laying tile adhesive to an even bed. The steel blade holds its edge against abrasive mortars, and an even bed is what stops lippage and hollow spots under the tile.The swan neck hooks over the bucket rim between loads...
- From $12.50
- From $12.50
- Unit price
- per
-
BAT Bright Steel Trowel V NotchVendor:B.A.TA V-notch trowel for laying adhesive at the spread rate the manufacturer asks for. The notch size sets how much adhesive goes down: pick the size your adhesive datasheet calls, then hold a consistent angle and the ribs come out even.Available in 3mm, 5mm,...
- $28.25
$0.00- $28.25
- Unit price
- per
-
BAT Trims Tile CrossesVendor:B.A.TKeep grout joints even and tiled layouts looking sharp with B.A.T Tile Crosses. These cross-shaped plastic spacers help maintain consistent gaps between tiles as you set out walls, floors and feature areas.Choose from 1.5 mm, 2 mm and 3 mm nominal joint sizes. Smaller...
- From $3.17
- From $3.17
- Unit price
- per
-
BAT Trims Tile WedgesVendor:B.A.TTile wedges adjust spacing where a cross will not fit. The taper runs from 5mm down to a fine point, so you slide one under a tile edge to lift it level or nudge two tiles apart to widen a joint. Pull them out...
- From $6.67
- From $6.67
- Unit price
- per
-
Panther Stainless Steel TrowelVendor:PantherA 280mm stainless notch trowel for tile adhesive beds, with square notch sizes from 4mm to 15mm. The wide blade covers more floor per pass, and the spot-riveted build holds together under the torque of heavy combing.Stainless steel will not rust or pit against...
- $11.58
$0.00- $11.58
- Unit price
- per
-
Panther Levelling System WedgesVendor:PantherPanther Levelling System Wedges are the reusable part of the Panther tile levelling system. Insert a wedge into a compatible base clip to hold adjoining tile edges in alignment while the adhesive sets. The pack contains 250 wedges.Where to useUse with the appropriate Panther...
- $31.83
- $31.83
- Unit price
- per
-
Panther Levelling System Base ClipsVendor:PantherPanther Levelling System Base Clips help keep adjoining wall and floor tile edges aligned while the adhesive cures. Choose 1.5 mm or 2 mm nominal grout-joint spacing for tiles 3–12 mm thick. Use the clips with compatible reusable Panther levelling wedges, sold separately.Available buying...
- From $27.50
- From $27.50
- Unit price
- per
-
Panther Thin Turbo Diamond BladeVendor:PantherA thin turbo diamond blade for cutting porcelain, marble, and granite without chewing the edge. The thin rim takes a smaller bite per pass, which is what keeps chips out of expensive tile, and the reinforced core runs true instead of wobbling through the...
- From $29.92
- From $29.92
- Unit price
- per
-
Panther Levelling System 1.5mm Large Base Clips – 250 PackVendor:PantherPanther Levelling System 1.5 mm Large Base Clips help keep adjoining tile edges level while adhesive cures. The larger clip base is designed for tiles 11–20 mm thick and sets a nominal 1.5 mm joint. This pack contains 250 single-use clips.Where to useUse these...
- $19.41
- $19.41
- Unit price
- per
-
DTA Flat Out Levelling System Tile Clips 1.5mmVendor:
Levelling clips stop tile lippage. Slot the clip base under two adjoining tiles, insert the Flat Out wedge with the pliers, and the clip pulls the tiles level while the adhesive cures. Break the stem off along the scored line next day and reuse...- From $27.50
- From $27.50
- Unit price
- per
Frequently Asked Questions
What happens during tile setting?
Tile setting bonds, positions, spaces, levels and cuts the tile. It covers tile adhesives, trowels, spacers, levelling systems and cutting tools. Match the product spec to the job conditions before you start.
How do I choose a tile adhesive?
Match the adhesive to the tile, substrate, exposure and approved system. Check the product data before use, especially for large-format tile, external work or special substrates.
What do tile levelling clips do?
Levelling clips and wedges help align adjacent tiles during installation. They support the tile layout but do not correct an unsound or uneven substrate. Match the product spec to the job conditions before you start.
Are trowels important for tile adhesive?
Yes. The trowel notch controls adhesive coverage and transfer. Use the trowel and method specified for the tile size, backing and substrate. Match the product spec to the job conditions before you start.
When can I grout after tile adhesive?
Grout only after the adhesive has cured for the time stated in its technical data. Temperature, substrate and tile type can change that time. Match the product spec to the job conditions before you start.