13
A thin turbo diamond blade for cutting porcelain, marble, and granite without chewing the edge. The thin rim takes a smaller bite per pass, which is what keeps chips out of expensive tile, and the reinforced core runs true instead of wobbling through the cut.
Wet cutting for the long runs, dry for the quick adjustment on site. Fits 105mm and 125mm angle grinders.
Thin turbo diamond blade for cutting dense porcelain, marble and granite with a narrow kerf.
Reinforced core supports stable tracking through tile cuts.
Available for 105 mm and 125 mm angle-grinder formats and suitable for wet or dry cutting where the tool and work method permit.
Fit the blade to a compatible grinder with the correct guard and rotation direction.
Support the tile, start the cut with light pressure and allow the diamond rim to cut without forcing the tool.
Use wet cutting where the equipment and site method permit to reduce heat and dust; otherwise apply the required dry-cutting dust controls.
Tile-cutting blade rather than a general-purpose steel or block-cutting blade.
Use only on a grinder and material compatible with the blade diameter, bore, speed rating and cutting method.
Dry cutting creates respirable dust; use appropriate dust controls and PPE.
Panther Thin Turbo Diamond Blade Physical Properties
| Property | Value |
|---|---|
| Blade Type | Diamond Turbo |
| Diameter | 105mm (4”), 125mm (5”) |
| Core | Reinforced |
| Cutting Method | Wet and Dry |
| Material Compatibility | Ceramic, Porcelain, Slate, Marble, Granite |
| Application | Tile Cutting |
| Mounting Compatibility | Angle Grinder |
| Chipping Reduction | Thin Turbo Rim |
| Storage Requirements | Cool, dry place |
| Certifications | Meets industry standards for tile cutting tools |