-
Megapoxy 108Vendor:
Use Megapoxy 108 for rapid, high-strength structural bonding and repair in civil engineering. It develops 95 MPa compressive strength in 2 hours, offers an ultimate 120 MPa, and cures in the presence of moisture.- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.
- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Use Megapoxy 206 Ultra for heavy-duty civil engineering grouting, pile repairs, and machinery installations. It delivers 115 MPa compressive strength, bonds aggressively to concrete and steel, and complies with AS/NZS 4020 for drinking water contact, even curing reliably in damp conditions.
- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy 254Vendor:
Use Megapoxy 254 for high-strength structural bonding and repairs on concrete, metal, and natural stone. It delivers 70 MPa compressive strength, ensures a non-staining finish on sensitive materials, and cures in cold, damp conditions, reducing callbacks from bond failure.
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy 34Vendor:
Use Megapoxy 34 for high-performance electrical encapsulation and cable jointing where AS3100 compliance and a 150°C peak service temperature are critical. It delivers 315 kV/cm dielectric strength for demanding applications.
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
Use Megapoxy 36 DuoMix for rapid bonding of road markers, parking sensors, and carpark stops to bitumen and concrete. It cures to a 7.5 MPa bond strength in 1 hour at 25°C, minimising traffic disruption.
- From $81.17
- From $81.17
- Unit price
- per
-
Megapoxy 63Vendor:
Use Megapoxy 63 for high-strength, non-shrinking epoxy bonding of stone and tile to masonry. It delivers mechanical strengths superior to concrete, ensuring durable, long-lasting connections.
- From $172.66
- From $172.66
- Unit price
- per
-
Megapoxy 69Vendor:
Use Megapoxy 69 for structural bonding and filling where high strength and impact resistance are critical. This non-sag epoxy delivers 120MPa compressive strength and 17MPa steel-to-steel lap shear, ensuring permanent bonds in civil, marine, and heavy-duty applications.
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy 84Vendor:
Use Megapoxy 84 for high-temperature bonding of ceramic tiles to steel or concrete, or for securing components in crushing machinery. It delivers a 120 MPa compressive strength and tolerates continuous 120°C service, ensuring durability where standard adhesives fail.
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy CT5Vendor:
Megapoxy CT5 is an Australian-made compound designed for backfilling and encapsulating inductive detector loops, weigh-in-motion sensors, and Aircraft Landing Lights on asphaltic and concrete roadways.
- $605.72
- $605.72
- Unit price
- per
-
Megapoxy EVendor:
Use Megapoxy E for high-impact electrical encapsulation and casting, delivering up to 19 KV/mm dielectric strength and 100 MPa compressive strength. Choose Hardener 155 for continuous service up to 150°C.
- From $179.39
- From $179.39
- Unit price
- per
-
Megapoxy HVendor:
Use Megapoxy H for high-strength concrete and steel repairs, especially where potable water contact or wet conditions are present. Its AS/NZS 4020:2018 compliance and hydrophilic properties ensure performance and peace of mind in critical infrastructure applications.
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HICBVendor:
Use Megapoxy HICB for heavy-duty backing and grouting in crushers and mills. Its 115 MPa compressive strength and 20 MPa steel bond provide critical impact and structural reinforcement, preventing movement and extending equipment life where standard grouts fail.
- $148.06
- $148.06
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy HTVendor:
Use Megapoxy HT for high-strength concrete repairs and steel anchoring in wet or harsh conditions. It delivers 100 MPa compressive strength and 36 MPa concrete bond, even resisting hydrogen sulphide.
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
Use Megapoxy HX for deep penetration into fine concrete cracks or porous substrates. Its extra low 200 cps viscosity ensures full repair, delivering a 140 MPa compressive strength with a 60-minute work time.
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MegabondVendor:
Use Megapoxy Megabond for high-strength structural bonding and repair of concrete, metal, and natural stone. It delivers 60MPa compressive strength, handles a 1:1 mix ratio, and will not stain light-coloured marbles.
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a professional two-component epoxy paste adhesive engineered for high-strength structural bonding and repair. With a user-friendly 1:1 mix ratio and exceptional compressive strength, it provides a permanent, waterproof, and chemical-resistant bond for concrete, metal, and stone.
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PFVendor:
Use Megapoxy PF for rapid set, high-strength bonding and repairs on concrete, metal, and stone. It sets in 7 minutes, achieves 90% cure in 1 hour at 25°C, and offers 70 MPa compressive strength for demanding structural applications.
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy PMVendor:
Use Megapoxy PM for non-sag, high-strength bonding and filling on vertical or overhead surfaces, including natural stone where a non-staining finish is critical. It delivers 80 MPa compressive strength and cures reliably even in cold or damp conditions.
- From $80.50
- From $80.50
- Unit price
- per
-
Megapoxy Pigment PasteVendor:
Use Megapoxy Pigment Paste for tinting epoxy systems, ensuring durable and consistent colour. This low VOC, epoxy-compatible paste avoids compromising the resin's final performance, reducing the risk of rework.
- $51.10
- $51.10
- Unit price
- per
-
Megapoxy MegadureVendor:
Use Megapoxy Megadure Ceramic for extreme abrasion protection and grouting high alumina ceramic tiles in heavy industrial environments. This high alumina bead epoxy paste offers rapid 2-hour initial cure (fast-set) at 25°C and robust wear resistance for critical equipment, extending service life in abrasive conditions.
- $128.51
- $128.51
- Unit price
- per
-
Mapei Kerapoxy Easy Design Grout and AdhesiveVendor:
Use Mapei Kerapoxy Easy Design for grouting 1-15mm joints and adhering tiles in demanding environments. This acid-resistant, bacteriostatic epoxy is certified for hygiene, delivers high mechanical strength, and offers decorative flexibility with add-ins.- $100.28
- $100.28
- Unit price
- per
-
Mapei Kerapoxy AdhesiveVendor:
Use Kerapoxy Adhesive for demanding tile and stone installations where strength and chemical resistance are critical. Its R2T classification provides no vertical slip and excellent long-term bond, preventing failures in pools and external areas.
- $181.98
- $181.98
- Unit price
- per
Frequently Asked Questions
Which Megapoxy for bonding concrete to steel?
Megapoxy 63 or 69. Both are two-part gap-filling paste epoxies for vertical, overhead, and damp-condition structural bonds; 69 carries higher strength for heavy bearing.
What is Megapoxy 36 used for?
Rapid-setting bonds for road markers, carpark stops, and parking sensors on asphalt, bitumen, and concrete. It dispenses through a 1:1 twin cartridge with a self-mixing static nozzle, built for high-volume civil placement.
Which epoxy is safe for drinking water tanks?
Megapoxy P1 complies with AS/NZS 4020:2018 for potable water contact. Confirm the current certificate on the data sheet before specifying. Match the product spec to the job conditions before you start.
Why did my epoxy stay tacky and never harden?
Almost always a mix fault: wrong ratio, partial mixing, or expired material. Epoxy needs exact ratio and thorough blending; twin-cartridge dispensers with static mixers remove most of that risk.
Is there epoxy grout here for tiles?
Yes, Mapei's epoxy grouts sit alongside the Megapoxy structural line. Epoxy grout trades harder cleanup for stain and chemical resistance cement grouts cannot match. Match the product spec to the job conditions before you start.