-
Megapoxy 108Vendor:
For civil engineering applications requiring rapid structural strength, Megapoxy 108 is a rapid-setting liquid epoxy binder formulated for splicing bridge piles and executing high-strength repairs to precast concrete. Its fast compressive and impact strength development allows pile driving operations to resume with minimal downtime,...- From $250.41
$0.00- From $250.41
- Unit price
- per
-
Megapoxy 132Vendor:
For floor protection in food and beverage production facilities, pharmaceutical industries, hospital kitchens, and high-traffic forklift ramps, Megapoxy 132 provides a high-strength, solvent-free epoxy barrier. This low-viscosity system is formulated to resist regular industrial cleaning and abrasion, and it carries AS 4020:2018 approval for...
- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy 154Vendor:
For treating damp surfaces, masonry, and green concrete, Megapoxy 154 is a two-component water-based epoxy designed to prime, seal, and provide a moisture barrier before laying down floor finishes or secondary membranes. It cures to a matte, chemical-resistant coating that tolerates foot traffic and...
- $700.00
- $700.00
- Unit price
- per
-
Megapoxy 206 UltraVendor:
For high-load civil engineering applications like pile splicing, rail track grouting, and anchoring steel bolts into concrete, Megapoxy 206 Ultra provides a 100% solids, flowable epoxy grout that develops high compressive and impact strengths. It is a hydrophilic, water-displacing formulation that maintains adhesion and...
- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy 254Vendor:
For bonding precast concrete, natural stone, and heavy metal fixtures on vertical or overhead surfaces where sagging would ruin the assembly, Megapoxy 254 is a non-sag epoxy adhesive paste that holds its position without slipping. Formulated to cure even under cold and damp conditions,...
- $596.35
- $596.35
- Unit price
- per
-
Megapoxy 34Vendor:
For underground cable jointing and the encapsulation of electrical components, Megapoxy 34 is a low-viscosity, 100% solids epoxy resin formulation designed for electrical insulation and casting. It conforms to AS3100-1990 (including amendments 1 and 2 by AGL) for the encapsulating and potting of electrical...
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy 36 DuoMixVendor:
For securing reflective road markers, ceramic markers, LED road markers, concrete carpark stops, and parking sensors, Megapoxy 36 DuoMix provides a rapid-setting structural bond to asphalt, bitumen, and concrete. Dispensed through a 1:1 twin cartridge system with a self-mixing static nozzle, this dual-component epoxy...
- From $81.17
- From $81.17
- Unit price
- per
-
Megapoxy 63Vendor:
For bonding mitre joints, natural stone, and porcelain where a visible glue line would ruin the finish, Megapoxy 63 is a translucent, high-strength epoxy gel. This solvent-free adhesive allows for thin film applications and can be tinted with pigment pastes to match the exact...
- From $172.66
- From $172.66
- Unit price
- per
-
Megapoxy 69Vendor:
For high-load structural joinery, marine assembly, and stone fabrication where components are subject to repeated high-impact forces, Megapoxy 69 provides a permanent bond with a non-sag, gel-type consistency. It secures metals, timber, granite, marble, and fibreglass on vertical and overhead surfaces without slumped joints...
- From $85.39
- From $85.39
- Unit price
- per
-
Megapoxy 84Vendor:
For high-wear industrial environments where high alumina ceramic tile linings must be fixed to steel or concrete under elevated temperatures, Megapoxy 84 provides the high-strength, heat-tolerant bond required to prevent lining failure. It is also formulated for the extreme mechanical demands of locking the...
- $177.95
- $177.95
- Unit price
- per
-
Megapoxy CT5Vendor:
For backfilling and encapsulating inductive detector loops, traffic loops, and aircraft landing lights on asphaltic and concrete roadways, Megapoxy CT5 provides a rapid-setting, pourable seal. This cold-pour liquid compound sets under adverse cold and damp conditions, allowing civil contractors and traffic technicians to minimise...
- $605.72
- $605.72
- Unit price
- per
-
Megapoxy EVendor:
For high-impact encapsulation of instrument transformers, lighting transformers, small power transformers, and coils, Megapoxy E provides high-dielectric casting insulation for electrical components operating under demanding physical and thermal stress. Casting and encapsulation performance Megapoxy E is a high-impact pouring epoxy formulated for casting electrical...
- From $179.39
- From $179.39
- Unit price
- per
-
Megapoxy HVendor:
For structural concrete repairs, steel anchoring, and wet-to-dry concrete bonding, Megapoxy H is a low-viscosity, solvent-free hydrophilic epoxy resin that creates permanent bonds stronger than the concrete itself. It complies with AS/NZS 4020:2018 for potable water contact, making it suitable for drinking water structures,...
- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy HICBVendor:
For backing metal liner plates and filling gaps between liners and support structures in cone crushers, gyratory crushers, and grinding mills, Megapoxy HICB is a two-component, 100% solids, pourable epoxy grout. It provides the high impact resistance and compressive strength needed to withstand heavy...
- $148.06
- $148.06
- Unit price
- per
-
Megapoxy LVSVendor:
For internal sealing of concrete tanks, waterproofing walls and floors, and toughening timber surfaces, Megapoxy LVS is a two-component, clear liquid epoxy formulated to penetrate porous substrates. With a low mixed viscosity of 90cps, it sinks into the pores of concrete, timber, bricks, mortar,...
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy MCVendor:
For high-traffic food and beverage facilities, chemical bunds, and wastewater infrastructure, Megapoxy MC provides a 100% solids, VOC-free epoxy maintenance coating that resists heavy abrasion, chemical exposure, and hydrogen sulphide gas. It protects concrete and steel substrates, curing to a hygienic, dust-free gloss finish...
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy HTVendor:
For wet-to-dry concrete bonding, structural repairs, and underwater or splashzone applications, Megapoxy HT is a hydrophilic epoxy gel adhesive that forms permanent bonds on concrete, metal, and steel surfaces. Its formulation is solvent-free, contains no volatile organic compounds (Nil V.O.C.), and resists hydrogen sulphide...
- From $197.39
- From $197.39
- Unit price
- per
-
Megapoxy HXVendor:
For structural concrete crack repair, low-pressure injection, and masonry sealing, Megapoxy HX is a 100% solids, solvent-free epoxy liquid with an extra-low mixed viscosity of 200cps at 25°C. This thin profile enables deep capillary penetration into tight fissures, pores, and micro-cracks across concrete, masonry,...
- From $203.94
- From $203.94
- Unit price
- per
-
Megapoxy MegabondVendor:
For bonding natural stones and tiles to masonry substrates where staining or moisture sensitivity is a risk, Megapoxy Megabond provides a high-strength, structural epoxy connection. This VOC-free, 100% solids adhesive cures to an off-white finish that will not stain light-coloured marbles, making it suitable...
- $500.93
- $500.93
- Unit price
- per
-
Megapoxy P1Vendor:
For high-strength structural bonding and concrete repair, Megapoxy P1 is a two-component gap-filling epoxy paste formulated for vertical, overhead, and damp-condition applications. It is chemically resistant to hydrogen sulphide in sewage systems and complies with AS/NZS 4020:2018 for contact with potable drinking water, making...
- From $84.10
- From $84.10
- Unit price
- per
-
Megapoxy PFVendor:
For emergency repairs to concrete structures, pipes, and tanks, Megapoxy PF is a rapid-set epoxy paste adhesive that hardens-as-you-hold-it. It sets in seven minutes and achieves more than half its ultimate strength within 15 minutes of mixing at 25°C, making it suitable for immediate...
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy PMVendor:
For structural bonding and repair jobs on vertical or overhead surfaces where sagging must be prevented, Megapoxy PM provides a non-sag epoxy adhesive paste that holds its position. When properly mixed, this two-part epoxy paste secures heavy materials like precast concrete, natural stone, and...
- From $80.50
- From $80.50
- Unit price
- per
-
Megapoxy Pigment PasteVendor:
For high-end natural stone and concrete installations where visible adhesive lines can ruin the finish, Megapoxy Pigment Paste provides a direct way to colour-match Megapoxy resins. This epoxy-based paste blends into the adhesive system to make structural joins, repairs, and laminations disappear into the...
- $51.10
- $51.10
- Unit price
- per
-
Megapoxy ThinnersVendor:
Megapoxy Thinners is a solvent blend for thinning Megapoxy epoxy products. Add small amounts and mix until the viscosity suits the job: more flow for wet-out and penetration, less for filling. It is highly flammable. Work in a ventilated area, keep ignition sources away,...
- $221.95
- $221.95
- Unit price
- per
-
Megapoxy MegadureVendor:
For equipment exposed to severe wear in mines, ball mills, coal-fired plants, dredging operations, and abrasive slurry pumps, Megadure Ceramic provides a high alumina bead epoxy lining to protect critical metal, steel, and concrete surfaces from extreme abrasion. What it does Megadure Ceramic is...
- $128.51
- $128.51
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy 36 CartridgeVendor:
The static mixer nozzle for Megapoxy 36 cartridges. Two-part epoxy only bonds properly when the parts mix at the right ratio, and these internal elements do the blending for you at full extrusion pressure: no hand mixing, no ratio errors, no soft spots in...
- From $11.26
- From $11.26
- Unit price
- per
-
Static Mixer Nozzle For Megapoxy PM CartridgeVendor:
The static mixer nozzle for Megapoxy PM cartridges, for two-part epoxy paste in stone anchoring and structural work. The helical elements blend both parts under extrusion pressure, so the paste goes into the borehole mixed, air-free, and at ratio.One nozzle per cartridge keeps the...
- From $11.26
- From $11.26
- Unit price
- per
Frequently Asked Questions
Which Megapoxy Product should I use?
Select the Product by the task, substrate, exposure and working time. Use the current technical data to confirm bond strength, viscosity and cure limits. Do not select an epoxy from its colour or pack size alone.
How do I mix a two-part Megapoxy Product?
Measure Part A and Part B at the ratio in the Product technical data. Mix until the material is uniform. Do not change the ratio, and do not mix more than you can place within the stated working time.
Can I apply Megapoxy to damp concrete?
Only use it on damp concrete when the selected Product technical data permits that condition. Remove standing water, loose material and contamination. Prepare the surface by the specified method before you mix or apply the epoxy.
How long does Megapoxy take to cure?
Cure time depends on the Product, temperature, section size and exposure. Check the current technical data for working time, initial cure and full service time. Do not load, coat or immerse the work too early.
What safety equipment do I need for epoxy work?
Read the current safety data for both components. Use the stated gloves, eye protection and ventilation. Avoid skin contact, keep the work area clean, and dispose of mixed and unmixed waste as required.