Megapoxy PF Rapid Set Epoxy Paste Adhesive (2 Part Kit)
Megapoxy PF is a rapid-set epoxy adhesive designed for quick and effective repairs, setting in 3 minutes and providing high strength within 15 minutes.
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
- $82.69
- $82.69
- Unit price
- per
Prices do not include GST
Physical Properties
Mixing_ratio:
1 part a to 1 part b
Work_time_at_25c:
3 minutes
Minimum_cure_time_at_15c:
2 hours
Minimum_cure_time_at_25c:
1 hour
Minimum_cure_time_at_35c:
30 minutes
Minimum_application_temperature:
10°c
Maximum_operating_temperature:
80°c
Compressive_strength:
70 mpa
Bond_strength_concrete:
>3 mpa
Tensile_bond_strength_steel:
10 mpa
Modulus_of_elasticity:
2 gpa
Flexural_strength:
46 mpa
Tensile_strength:
21 mpa
Tensile_shear_strength:
8 mpa
Hardness_shore_d:
75
Coefficient_linear_thermal_expansion:
57.9 x 10-6 mm/mm/°c
Dielectric_strength:
190 kv/cm
Packaging:
4 litre & 20 litre kits, available in grey or white
Storage:
Store in a cool, dry place
Couldn't load pickup availability
Shipping & Delivery
**$15.95 + GST for Australia-wide shipping, excluding DG, oversized or long-length items, and bagged items weighing 15kg or above. If your order includes any of these, you will be contacted to arrange additional freight fees
Megapoxy PF is a rapid-set epoxy adhesive that sets in just seven minutes and reaches over half its ultimate strength within 15 minutes of mixing. Ideal for emergency on-the-spot repairs to tanks, pipes, machinery, concrete structures, and more, Megapoxy PF “hardens-as-you-hold-it” for immediate application. It will not stain or discolor white or light-colored marble and ceramics, making it suitable for a variety of bonding and repair applications.
Key Features
- VOC free
- Simple 1:1 mix ratio
- Smooth and easily workable
- Creamy texture, blends easily
- Non-sag on vertical and overhead surfaces
- Sets in 3 minutes at 25°C, 90% cure within 1 hour
- Very high strength permanent bonds
- Excellent tensile and compressive strengths, superior to concrete
- Excellent chemical resistance
- Can be machined after 30 minutes of cure at 25°C
Suitable Substrates
- Concrete
- Metal
- Natural stone
- Fibreglass
- Bricks and ceramics
Uses
- Bonding precast concrete articles
- Metal to metal or concrete bonding
- Grouting bolts
- Bonding natural stones, bricks, and ceramics
- Bonding compressed cement sheets
- Filling and repairing concrete pipes, tanks, and fibreglass articles
- Repairing concrete floors, stairs, and columns
- Flush-filling countersunk screws in fibre cement sheets
Benefits
- Provides rapid strength gain for quick and effective repairs
- Ensures strong adhesion to various substrates, including metals and concrete
- Suitable for both emergency repairs and planned maintenance
- Non-staining, suitable for use with white and light-colored materials
- Can be machined shortly after curing, reducing downtime
Application Guide
- Prepare surfaces by cleaning and removing any grease, oil, or coatings. Use mechanical abrasion or acid etching for concrete surfaces, and grit blasting or abrasion for metals.
- Mix Part A and Part B in a 1:1 ratio thoroughly to ensure proper curing and physical properties.
- Apply the mixed adhesive to the prepared surfaces, ensuring good coverage and bonding.
- Allow the adhesive to set for at least 3 minutes at 25°C. Full cure is achieved in 1 hour at 25°C.
- Clean tools and equipment with Megapoxy Thinners immediately after use.
Limitations
- Ensure accurate mixing to avoid incomplete curing or discoloration over time.
- Not recommended for use on coated surfaces unless coatings are removed.
Alternative Products
Need Help with Megapoxy PF Rapid Set Epoxy Paste Adhesive (2 Part Kit)?
Need more information about this product? Hit the button below and reach out to one of our experts now.
Recently Viewed Products
- Choosing a selection results in a full page refresh.