-
Adheseal N70 Industrial Silicone SealantVendor:
Adheseal N70 Industrial Silicone Sealant is a neutral-cure, high-movement silicone for industrial sealing, window perimeters, general glazing, weathersealing, expansion joints and exterior construction joints. With ±50% movement capability and 600% elongation at break, N70 is designed for demanding joints that need to remain flexible...- From $8.50
- From $8.50
- Unit price
- per
-
Adheseal Primer 50AVendor:
For high-liability installations on non-porous substrates where maximum performance and longevity are required, Primer 50A is a fast-drying adhesion promoter. This clear alcohol solution is a single-pack, ready-to-use wipe that prepares difficult-to-bond surfaces for Polyurethane, MS, Silicone, and acrylic sealants and adhesives. How it...
- $53.03
- $53.03
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Everflex Polyurethane Supaprime is a porous substrate primer for caulking, civil construction, and waterproofing. One litre covers 5 to 10 square metres depending on porosity, and its very low viscosity sinks deep into concrete, masonry, and timber to give sealants and membranes a stable,...
- $59.51
- $59.51
- Unit price
- per
-
Aluminium Angle Unequal 25x12Vendor:
Aluminium Angle Unequal 25x12 is a 6060 T5 mill-finish aluminium L-section with 25 × 12 mm unequal legs. The unequal 25 × 12 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $7.46
- $7.46
- Unit price
- per
-
Aluminium Angle Unequal 32x20Vendor:
Aluminium Angle Unequal 32x20 is a 6060 T5 mill-finish aluminium L-section with 32 × 20 mm unequal legs. The unequal 32 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $13.64
- From $13.64
- Unit price
- per
-
Aluminium Angle Unequal 40x20Vendor:
Aluminium Angle Unequal 40x20 is a 6060 T5 mill-finish aluminium L-section with 40 × 20 mm unequal legs. The unequal 40 × 20 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $16.52
- From $16.52
- Unit price
- per
-
Aluminium Angle Equal 40x40Vendor:
Aluminium Angle Equal 40x40 is a 6060 T5 mill-finish aluminium L-section with 40 × 40 mm equal legs. The equal 40 × 40 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- $20.28
- $20.28
- Unit price
- per
-
Aluminium Angle Unequal 50x25Vendor:
Aluminium Angle Unequal 50x25 is a 6060 T5 mill-finish aluminium L-section with 50 × 25 mm unequal legs. The unequal 50 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $17.23
- From $17.23
- Unit price
- per
-
Aluminium Angle Unequal 50x40Vendor:
Aluminium Angle Unequal 50x40 is a 6060 T5 mill-finish aluminium L-section with 50 × 40 mm unequal legs. The unequal 50 × 40 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $22.41
- From $22.41
- Unit price
- per
-
Aluminium Angle Equal 50x50Vendor:
Aluminium Angle Equal 50x50 is a 6060 T5 mill-finish aluminium L-section with 50 × 50 mm equal legs. The equal 50 × 50 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $25.40
- From $25.40
- Unit price
- per
-
Aluminium Angle Unequal 60x25Vendor:
Aluminium Angle Unequal 60x25 is a 6060 T5 mill-finish aluminium L-section with 60 × 25 mm unequal legs. The unequal 60 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $43.01
- $43.01
- Unit price
- per
-
Aluminium Angle Unequal 70x25Vendor:
Aluminium Angle Unequal 70x25 is a 6060 T5 mill-finish aluminium L-section with 70 × 25 mm unequal legs. The unequal 70 × 25 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- $15.73
- $15.73
- Unit price
- per
-
Aluminium Angle Equal 76x76Vendor:
Aluminium Angle Equal 76x76 is a 6060 T5 mill-finish aluminium L-section with 76 × 76 mm equal legs. The equal 76 × 76 mm legs give the same return on both sides of the 90° corner. It is stocked for general fabrication, caravan and...
- From $133.03
- From $133.03
- Unit price
- per
-
Aluminium Angle Unequal 100x50Vendor:
Aluminium Angle Unequal 100x50 is a 6060 T5 mill-finish aluminium L-section with 100 × 50 mm unequal legs. The unequal 100 × 50 mm legs give a wider primary face with a shorter return where the two sides of the detail do not need...
- From $56.43
- From $56.43
- Unit price
- per
-
Dowsil 791 Weatherproofing SealantVendor:
DOWSIL 791 Weatherproofing Sealant is a one-part, neutral-cure silicone designed specifically for window perimeter sealing, curtain wall weathersealing, façade joints and other high-movement exterior joints. With ±50% movement capability and excellent resistance to sunlight, rain, snow and ozone, it is a strong choice where...- From $14.97
- From $14.97
- Unit price
- per
-
Dowsil 795 Silicone SealantVendor:
For high-load structural glazing, panel stiffeners, and architectural joint sealing, 795 Silicone Sealant provides the physical strength to support glass and other heavy cladding materials under wind load, alongside the elasticity required for demanding weather seals. This neutral-cure RTV silicone forms a medium-modulus rubber...
- From $20.22
- From $20.22
- Unit price
- per
-
Sikaflex Construction AP+ Polyurethane Sealant - Concrete GreyVendor:
For movement and connection joints on porous substrates and general indoor or outdoor sealing, Sikaflex Construction AP+ provides a flexible, moisture-curing barrier. This polyurethane sealant manages joint movement on high-exposure facades, concrete structures, and metal connections without sagging or losing its seal. How it...- $311.80
- $311.80
- Unit price
- per
-
Concrete Grey
-
Black
-
White
-
Bostik Seal 'N' Flex One P390 Polyurethane Sealant 600ml - BlackVendor:
For expansion joints in precast panels, tilt-up concrete, brickwork, and fibre cement sheet cladding, Seal 'N' Flex One P390 Polyurethane Sealant 600ml provides a highly flexible, low-modulus barrier that accommodates joint movement without pulling away from the substrate. It is acoustic rated and meets...- From $322.60
- From $322.60
- Unit price
- per
-
Black
-
Grey
-
White
-
Bostik Seal 'N' Flex One P390 Polyurethane Sealant 300ml - GreyVendor:
For expansion joints in precast and tilt-up panels, brickwork, concrete, and fibre cement sheet, Seal 'N' Flex One P390 Polyurethane Sealant 300ml provides a Class-A joint seal that accommodates high-movement thermal cycles. It cures to a tough, flexible barrier that handles constant contraction and...
- $355.80
- $355.80
- Unit price
- per
-
Grey
-
White
-
Bostik Seal ‘N’ Flex One Plus P590 Polyurethane Sealant 300ml - GreyVendor:
For expansion and construction joints in precast panels, concrete cladding, and window installations where joint movement causes standard sealants to shear or pull away, Seal ‘N’ Flex One Plus P590 Polyurethane Sealant 300ml provides a low-modulus, high-movement barrier. This polyurethane formulation cures bubble-free—even on...
- $238.80
- $238.80
- Unit price
- per
-
Grey
-
White
-
Black
-
Bostik Seal ‘N’ Flex One Plus P590 Polyurethane Sealant 600ml - Off WhiteVendor:
For sealing expansion and construction joints in precast panels, insitu concrete, brickwork, and metal cladding, Bostik Seal ‘N’ Flex One Plus P590 provides a low-modulus polyurethane seal that accommodates joint movement without tearing or pulling away from the substrate. Joint movement and elasticity This...
- From $322.60
$310.60- From $322.60
- Unit price
- per
-
Off White
-
Grey
-
Black
-
Limestone
-
SA Silicone N60 - BlackVendor:Sealants AustralasiaSA Silicone N60 bonds glass to metal frames in structural and fin glazing applications. It cures into a durable, flexible seal that holds against environmental stress. This neutral cure formulation is compatible with reflective and laminated glass, painted aluminium, and anodised finishes. Where to...
- From $11.28
- From $11.28
- Unit price
- per
-
Black
-
Translucent
-
SA Contractors Silicone Sealant - BlackVendor:Sealants AustralasiaSA Contractors Silicone Sealant is a fast-curing acetoxy silicone for general glazing, shopfronts, glass-to-aluminium sealing, sheet metal, signage and exterior weatherproofing on compatible substrates. It is a practical contractor silicone for standard glazing and fabrication work where quick skinning, strong adhesion and long-term UV...
- From $9.37
- From $9.37
- Unit price
- per
-
Black
-
Translucent
-
Pasco Hypersil 911 Silicone Sealant - CharcoalVendor:
Pasco Hypersil 911 is a high-performance, 100% neutral-cure silicone for general glazing, window and door perimeter sealing, curtain walls, building cladding and exterior weatherproofing. It cures to form a tough, flexible waterproof seal with ±25% movement capability and strong resistance to UV and weather...- $161.20
- $161.20
- Unit price
- per
-
Charcoal
-
Chocolate
-
Eucalypt
-
Grey
Frequently Asked Questions
What products are in the Glazing range?
Primers, equal and unequal aluminium angle framing sections, structural and fin glazing silicones, perimeter weatherseals, and curtain-wall or façade movement-joint sealants. You use these to fit, frame, seal, and weatherproof architectural glass and aluminium assemblies.
Does this range sell glass?
No. The range holds the aluminium angles, primers, sealants, and adhesives that go around glass and aluminium assemblies. Glass supply, cutting, and handling are not part of this catalogue. You still need a glazier or glass supplier for the glass itself.
Which sealant do I use for structural glazing?
Check the manufacturer's written project approval before you use any structural glazing product. Do not pick a sealant just because its label mentions glass or aluminium. Confirm the exact system, substrate, and exposure conditions first.
What aluminium angle sizes do you stock?
We stock equal and unequal aluminium angle sections from 25 mm to 100 mm in different leg sizes. Check each product's dimensions before you order. Ask at the counter if we do not list the size your job needs.
Do you stock glazing tools and accessories?
We stock some fitting accessories such as window packers, glazing spatulas, backing rods, caulking sticks, and compatible caulking guns. These are not listed under every job. Ask at the counter if you need one for a specific assembly.
When do I use a movement-joint sealant instead of a glazing silicone?
Use a movement-joint sealant where the joint takes building movement, like curtain walls or façade joints. Use a structural or fin glazing silicone to hold glass to the frame. They are not interchangeable. Check the data sheet for the joint type it suits.