-
Gripset C-PlugVendor:
Use Gripset C-PLUG to instantly stop active water leaks in concrete and masonry. It sets in 30-60 seconds, cures to 35 MPa, and is safe for potable water.- From $51.96
- From $51.96
- Unit price
- per
-
Gripset C-Bed Cementitious ScreedVendor:
Use Gripset C-Bed for stable, shrinkage-compensated tile beds that are trafficable in 24 hours. Its polymer-modified formulation reduces efflorescence and bonds reliably to primed substrates and membranes.
- $29.09
- $29.09
- Unit price
- per
-
Gripset 11Y AdmixtureVendor:
Use Gripset 11Y to enhance cement-based compounds for demanding conditions, providing superior adhesion and water resistance for screeds, renders, and repair mortars in continuous immersion or freeze/thaw environments.
- From $99.49
- From $99.49
- Unit price
- per
-
Gripset GP PrimerVendor:
Use Gripset GP Primer for enhancing adhesion of Gripset membranes and tile adhesives on porous substrates. It dries in 30 minutes, covers 8-10m² per litre, and is crucial for preventing callbacks due to poor bonding.
- From $87.36
- From $87.36
- Unit price
- per
-
Gripset OP PrimerVendor:
Use Gripset OP Primer for reliable adhesion on challenging non-porous surfaces like metal, existing tiles, and PVC. This solvent-free, low VOC primer delivers a textured finish and dries in 30 minutes, ensuring a strong bond for Gripset membranes and tile adhesives.
- From $160.32
- From $160.32
- Unit price
- per
-
Gripset Xpress Primer H2O Plus PrimerVendor:
Use Gripset Xpress Primer H2O Plus for fast-drying vapour barrier priming on damp or green concrete and mineral surfaces, ready for overcoating in 1 hour. Its colour change indicator confirms readiness, preventing blistering and efflorescence.
- $389.93
- $389.93
- Unit price
- per
-
Gripset Xpress SP PrimerVendor:
Use Gripset Xpress SP to prime challenging non-porous and porous substrates, ensuring strong adhesion without etching and drying in 30 minutes for faster job completion.
- $298.34
- $298.34
- Unit price
- per
-
Gripset E-60 Epoxy PrimerVendor:
Use Gripset E-60 as a two-component epoxy primer and moisture barrier for concrete and masonry. It withstands up to 2.5 bar hydrostatic pressure, applies to damp and green concrete, and is AS 4020 compliant for potable water.
- From $106.24
- From $106.24
- Unit price
- per
-
Gripset Elastoproof B10 / B50Vendor:
Elastoproof B50 is a high-performance joint band for waterproofing detail work at junctions, corners, control and expansion joints. The central “Flexible Zone” accommodates movement in multiple directions with up to 100% elastic recovery, while the fleece edges embed into a wet liquid membrane to create a seamless, durable seal. Designed for trade use in commercial, industrial, and residential wet areas.
- From $51.61
- From $51.61
- Unit price
- per
-
Gripset Elastoproof Prefabricated CornersVendor:
Use Gripset Elastoproof Prefabricated Corners to ensure a seamless, elastic seal at 90° and 270° corner intersections in waterproofing applications. These NBR rubber corners offer 100% elastic recovery and high tear resistance, specifically designed to integrate with Gripset membranes to prevent corner failures.
- $90.65
- $90.65
- Unit price
- per
-
Gripset BRW PF TapeVendor:
Use Gripset BRW PF Tape for instant, self-adhesive sealing of junctions, penetrations, and flashings, offering immediate overcoating and eliminating drying time compared to liquid options.
- From $33.69
- From $33.69
- Unit price
- per
-
Gripset Elastoproof Base CollarsVendor:
Pre-formed, stretchable waterproofing collars for sealing around pipe and service penetrations. Made from Gripset’s Elastoproof fabric with a central elastomeric zone, ensuring a watertight, flexible seal that integrates with liquid membranes. Available in multiple sizes for various pipe diameters.
- From $22.52
- From $22.52
- Unit price
- per
-
Gripset BRW PF SquareVendor:
Use Gripset BRW PF Squares for instant, primer-less sealing of penetrations and joint intersections, allowing immediate overcoating with membranes and finishes. Its 0.8mm butyl rubber provides a flexible, high-adhesion detail that prevents moisture ingress in critical areas, operating from -40°C to 100°C.
- From $9.99
- From $9.99
- Unit price
- per
-
Gripset 2P Class II MembraneVendor:
Use Gripset 2P for critical waterproofing across internal/external wet areas, swimming pools, and potable water tanks. This two-part cementitious membrane is certified to AS/NZ 4020 for drinking water and provides Class II flexibility with fast re-coat times.
- $188.44
- $188.44
- Unit price
- per
-
Gripset 38FC MembraneVendor:
Use Gripset 38FC for rapid waterproofing of internal and external wet areas and roofs. It allows tiling in 4 hours and flood testing in 24 hours, supported by AS 4858 and AS 4654.1 compliance and >300% elongation.
- From $93.63
- From $93.63
- Unit price
- per
-
Gripset 51 MembraneVendor:
Use Gripset 51 for flexible, solvent-free waterproofing of underground and external structures. Its >500% elongation bridges cracks, providing robust protection against water, rot, and corrosion in continuously damp environments.
- From $71.51
- From $71.51
- Unit price
- per
-
Gripset P39 MembraneVendor:
Use Gripset P39 for compliant waterproofing in permanently wet areas, exposed roofs, and under tile. Its hybrid polyurethane formula ensures >300% Class III flexibility and will not re-emulsify, meeting AS 4858 and AS 4654.1 standards.
- $232.47
- $232.47
- Unit price
- per
-
Gripset C-1P Cementitious MembraneVendor:
Use Gripset C-1P for demanding waterproofing jobs, resisting up to 5 bar positive and 1.5 bar negative hydrostatic pressure. This flexible, fibre-reinforced cementitious membrane bridges cracks up to 0.75 mm and holds AS 40200 potable water approval.
- $166.30
- $166.30
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Use Gripset Xpress Multi Pro for waterproofing roofs, balconies, and wet areas where fast project turnaround is critical. It's rain-resistant in 3 hours, withstands ponding water, and remains highly flexible for lasting protection.
- $389.93
- $389.93
- Unit price
- per
-
Gripset BRW PFNVendor:
Use Gripset BRW PFN for compliant internal and external floor waterproofing, including anti-fracture over cracked substrates. This self-adhesive butyl rubber sheet delivers >60% elongation and performs from -30°C to 80°C, passing AS 4858 and AS 4654.1.
- $481.10
- $481.10
- Unit price
- per
-
Gripset BRW HDVendor:
Use Gripset BRW HD for instant, flexible subterranean and wet area waterproofing. Its self-adhesive butyl rubber and HDPE construction eliminates curing delays, resists extreme temperatures from -30°C to 80°C, and stands up to ground salts.
- $462.21
- $462.21
- Unit price
- per
-
Gripset XpressLay PVC MembraneVendor:
Use Gripset XpressLay for rapid internal wet area waterproofing and anti-fracture protection. It allows immediate tiling and meets AS 4858, eliminating cure time delays on site.
- $578.97
- $578.97
- Unit price
- per
-
Gripset C-Mastic Tile AdhesiveVendor:
Use Gripset C-Mastic for high-performance tiling applications, delivering C2S1TE classified bond strength, non-slump characteristics for large format tiles, and a respirable silica-free formulation.
- $35.64
- $35.64
- Unit price
- per
-
Gripset C-Rubber Tile AdhesiveVendor:
Use Gripset C-Rubber for demanding internal and external tiling jobs, including wet areas, where C2TES1 performance is required. Its flexible, non-slump formulation and respirable silica free composition provide a reliable and safer installation.
- $43.31
- $43.31
- Unit price
- per
-
Gripset C-Lite Tile AdhesiveVendor:
Use Gripset C-Lite for critical tiling jobs that demand durability and flexibility, such as immersed areas, large format tiles, and underfloor heating. Its C2TES2 classification ensures high bond strength and deformability in challenging conditions.
- $45.47
- $45.47
- Unit price
- per
-
Gripset LS Trafficable CoatingVendor:
Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.
- $230.09
- $230.09
- Unit price
- per
-
Gripset B09 Bituminous Surface TreatmentVendor:
Use Gripset B09 to rejuvenate oxidised asphalt and re-surface pitted layers, providing a non-slip, durable coating. Its unique polymer technology and cement cross-linking property deliver fast drying and extended asset life.
- $191.42
- $191.42
- Unit price
- per
-
Gripset B26 Asphalt Crack FillerVendor:
Use GRIPSET B26 for cold-applied asphalt and bitumen crack sealing. Its fast-drying, flexible formulation allows traffic in 15 minutes, avoiding the need for heating equipment and resisting sulphates.
- $187.64
- $187.64
- Unit price
- per
Frequently Asked Questions
Which Gripset membrane suits a bathroom?
Gripset 38FC or Elastoproof cementitious membranes meet wet-area requirements under tiles. Xpress Multi Pro suits same-day programs because it tiles sooner. Damp the surface down first so the coat does not flash off on hot concrete.
What primes concrete before a Gripset membrane?
Gripset GP general purpose primer on porous concrete and render. OP primer keys non-porous or smooth surfaces where water-based primer would not hold.
Can Gripset products stop an active leak?
Yes. C-Plug rapid-set compound plugs gushing leaks by hand in minutes. For hairline leaking cracks, injection with Mountain Grout foams seals against pressure.
What covers below-grade walls?
BRW self-adhesive butyl sheet membranes give instant barrier on foundations and retaining walls. Elastoproof B50 builds flexible negative-side coating over blockwork. Damp the surface down first so the coat does not flash off on hot concrete.
How long before tiling over Gripset?
Follow each product data sheet. Xpress grades accept tiling within hours; two-coat cementitious systems need overnight cure between coats and before tiling. Damp the surface down first so the coat does not flash off on hot concrete.