-
Anodized Aluminum Balcony Drip Angle (12mm x 5m)Vendor:
B.A.T 12 mm Anodised Aluminium Balcony Drip Angle is a 5 m balcony drip edge for longer tiled or rendered balcony runs. Its drip lip projects runoff clear of the fascia, cladding or render below, helping stop water tracking back beneath the balcony edge....- From $25.97
- From $25.97
- Unit price
- per
-
Balcony Drip Angle 90° Internal CornerVendor:
Balcony Drip Angle 90° Internal Corner is a pre-formed internal corner for the B.A.T 12 mm anodised aluminium balcony drip-angle system. It maintains the perimeter profile through a 90° inside turn without a site-made mitre. The matching component keeps the drip-edge geometry and finished...
- $25.97
- $25.97
- Unit price
- per
-
Tile Angle - L Shaped PerforatedVendor:B.A.TB.A.T L-Shaped Perforated Tile Angle is a 3 m tile edge trim for protecting and finishing exposed wall and floor tile edges. The perforated fixing leg embeds in the tile adhesive while the visible leg forms a clean finished edge. This full-range listing covers...
- From $8.51
$0.00- From $8.51
- Unit price
- per
-
Anodized Aluminum Balcony Drip Angle (12mm x 3m)Vendor:B.A.TB.A.T 12 mm Anodised Aluminium Balcony Drip Angle is a 3 m balcony drip edge for tiled or rendered balcony perimeters. The projecting drip lip directs runoff clear of the fascia, cladding or render below instead of allowing water to track back underneath the...
- From $21.96
- From $21.96
- Unit price
- per
-
Waterstop DoorlineVendor:Waterstop StreamlineFor wet area entries where the floor is bedded or screeded, Waterstop Doorline provides a clean, cohesive transition at the door sill. This door sill extrusion is designed to maintain a consistent look throughout the bathroom, matching the appearance of Waterstop Streamline showers while...
- From $21.00
- From $21.00
- Unit price
- per
-
Waterstop Streamline Straight Lengths (1 Leg)Vendor:Waterstop StreamlineWaterstop Streamline Straight Lengths are aluminium waterstop angles for tiled wet areas, used at shower entries and waterproofing transitions where a clean, defined barrier is required. The one-leg profile provides a rigid surface for membrane termination while helping establish the finished tile and screed...
- From $98.77
- From $98.77
- Unit price
- per
-
Waterstop Streamline 90° Corner (2 Leg)Vendor:Waterstop StreamlineWaterstop Streamline 90° Corner (2 Leg) is a pre-formed shower waterstop profile for square-corner and L-shaped wet-area layouts. The manufacturer specifies 6463-T5 aluminium with a 3 mm wall thickness, supplied as a one-piece 90° configuration so the corner geometry is formed before it reaches...
- From $191.75
- From $191.75
- Unit price
- per
-
Waterstop Streamline 135° Corner (2/3 Leg)Vendor:Waterstop StreamlineWaterstop Streamline 135° Corner (2/3 Leg) is a pre-formed shower waterstop profile for neo-angle, truncated and other angled wet-area layouts. The manufacturer specifies 6463-T5 aluminium with a 3 mm wall thickness, with factory-formed 135° two-leg and three-leg configurations. It provides the same dedicated Streamline...
- From $196.77
- From $196.77
- Unit price
- per
Frequently Asked Questions
What is a tile trim?
A tile trim protects or finishes an exposed tile edge, corner, transition or joint. Choose the profile for the tile thickness and the detail you need, such as an edge, corner, movement joint or floor transition.
How do I choose the correct tile angle depth?
Match the angle height to the tile and adhesive bed so the finished edge sits flush. Check the profile drawing and available dimensions before you order. The range includes tile angles in several heights for different tile builds.
What does a balcony drip angle do?
A balcony drip angle finishes the tile edge at balcony perimeters. It provides a clean edge and helps water run off away from the tile face. Choose the profile to suit the tile thickness and balcony detail.
What is a waterproofing angle?
A waterproofing angle is a tile trim profile used at wet-area edges and transitions. It provides a defined edge for membrane termination and tile finishing. Choose the profile to suit the tile thickness and waterproofing detail.
What is tile capping?
Tile capping is a trim profile that covers exposed tile edges. It protects the edge and provides a clean finish. Choose the capping profile to match the tile thickness and edge detail.
What is a water stop angle?
A water stop angle is a tile trim profile used at shower entries and wet-area transitions. It provides a rigid edge for membrane termination and sets the finished tile line. Choose the profile to suit the doorway or shower geometry.