-
Pasco Stainless Steel Caulking BladeVendor:
Pasco stainless caulking blade, 6mm to 40mm widths, wooden handle. Tools sealant joints square and full.- From $10.50
- From $10.50
- Unit price
- per
-
Pasco 8-Piece Caulking Blade SetVendor:
8-piece stainless caulking finishing blade set. One profile per joint width for crisp silicone and acrylic beads.
- $79.64
- $79.64
- Unit price
- per
-
Glaziers SpatulaVendor:Adheseal ToolsGlazier's spatula with four working profiles: square, radius, and inside and outside angles, on one blade.
- $11.50
- $11.50
- Unit price
- per
-
Silicone Scraper - RedVendor:Adheseal ToolsRed moulded silicone scraper for tooling sealant beads and stripping excess without scratching finished surfaces.
- From $9.95
- From $9.95
- Unit price
- per
-
Glaziers Spatula RoundedVendor:Adheseal ToolsBlue moulded caulking pad with rounded corner profiles and marked radii for tooling sealant fillets.
- From $9.95
- From $9.95
- Unit price
- per
-
Glaziers Spatula SquareVendor:Adheseal ToolsBlue moulded caulking pad with square edge for straight sealant finish lines on glass and panels.
- From $9.95
- From $9.95
- Unit price
- per
-
Adheseal Caulking Removal ToolVendor:Adheseal ToolsCaulking removal tool with hardened V blade and flat scraper for stripping failed silicone and PU from joints.
- From $4.99
- From $4.99
- Unit price
- per
-
Adheseal Nozzle SnipperVendor:Adheseal ToolsV-cut nozzle snipper for sealant cartridges. Clean square cuts, no crushing, with a built-in seal-punch pin.
- From $6.99
- From $6.99
- Unit price
- per
-
DTA Silicone Remover ToolVendor:
Manual scraper for cured silicone and acrylic removal from joints and corners. Dual-action push/pull blade.- From $25.16
- From $25.16
- Unit price
- per
Frequently Asked Questions
What is a glazier's spatula used for?
Tooling and finishing sealant beads. The flat blade presses the bead into the joint sides for adhesion and leaves a smooth, concave profile that sheds water. Round-blade versions suit curved frames and tight radii.
How do I remove old silicone before reapplying?
Slice the bulk off with a sharp blade, then work the residue off with a caulking remover tool or scraper. New silicone will not bond to old silicone, so full removal decides whether the new bead holds.
What is the red silicone scraper for?
Stripping and finishing in wet areas. Its plastic edge will not scratch acrylic, glass, or glazed tile, which makes it the safe choice inside showers and around baths where metal blades gouge.
Do the Pasco caulking blades fit any holder?
They fit standard six-inch scraper bar handles. Blades are replaceable, so keep spares in the kit: a fresh edge shears sealant cleanly while a dull one smears it across the joint.
When should I tool the bead after applying?
Within the skin-over time on the cartridge, usually five to fifteen minutes indoors. Too early and the bead slumps; too late and the skin tears instead of smoothing.