-
Rokset Pro Mini Roller Frame 390mmVendor:
A 390mm mini roller frame for detail work: trims, doors, cupboard faces, edges, and touch-ups. The contoured handle sits light in the hand and the 6mm gauge wire keeps the roller steady under pressure, so edges come out clean.The threaded end fits standard extension...- From $2.70
- From $2.70
- Unit price
- per
-
Roller Frame Heavy DutyVendor:
A 230mm heavy duty roller frame that does not bend when you lean on it. The stiff cage keeps even pressure across the sleeve, so large walls and ceilings finish at one thickness instead of going thin where the frame flexed.Ergonomic grip for hand...
- From $8.09
- From $8.09
- Unit price
- per
-
Rokset Ace Polyester Roller Cover 230mm x 12mmVendor:
A 230mm knitted polyester roller cover with 12mm nap for keeping a wet edge across big areas. It picks up a heavy load and releases it at an even rate, so long walls roll out without lap marks or matted fibre.Best with water-based paints...
- From $19.34
- From $19.34
- Unit price
- per
-
Rokset Pro Extension PoleVendor:
An aluminium extension pole for rollers on high walls and ceilings. Extends to reach without a ladder on interior repaint work, and locks at the length you set so pressure stays even through the stroke.Standard roller frame thread. Wipe it down before collapsing so...
- From $23.55
- From $23.55
- Unit price
- per
-
5-in-1 Combo ToolVendor:
The painter's all-rounder: five jobs on one stainless blade. Scrape loose paint, gouge out failed putty, spread filler, clean rollers, and rake out old caulk before resealing.The full-tang stainless blade will not rust, and the hardwood handle takes a grip with wet or dusty...
- From $10.30
- From $10.30
- Unit price
- per
-
Stripping ScraperVendor:
A stiff scraping blade for pulling hardened adhesive, paint, and levelling compound off subfloors and walls. The angled blade bites under the material and levers it off in strips; get the old adhesive off or the new floor will telegraph every ridge you left.A...
- From $7.59
- From $7.59
- Unit price
- per
-
Sequence Pro 15-in-1 Painter's ToolVendor:
A painter's multi-tool that does the small jobs so the toolbag does not have to. The stiff steel blade scrapes flaking paint, cleans rollers, and opens cans. The convex and concave spreaders lay filler on flat stock and curved mouldings. A nail setter punches...
- From $12.10
- From $12.10
- Unit price
- per
Frequently Asked Questions
Which roller cover for a fine finish on walls?
The microfibre cover lays paint smoother and with less spatter than basic foams. The Ace polyester 230mm suit broad walls where production speed matters more than mirror finish.
Do I need the mini roller frame?
For cutting in edges, doors, and tight panels, yes: a 100mm mini reaches where a full frame drags. Pair it with the telescopic pole for ceilings and you skip most ladder work.
What is the Rokset 5-in-1 tool for?
The painter's multitasker: scraping, spreading filler, cleaning rollers, opening cans, and striking caulk lines. The 15-in-1 extends the idea further if you like one tool doing everything.
Is the stripping scraper good for removing old paint?
Yes. Its stiff blade peels flaking paint and texture coating in sheets on flat surfaces, which is faster than sanding alone. Match the product spec to the job conditions before you start.
Which roller sleeve nap suits rough render?
A long-nap sleeve carries more paint and reaches into rough render and brick. Short nap suits smooth walls where texture through the film is not wanted.
How do I clean rollers after water-based paint?
Wash in warm water with detergent until the water runs clear, then spin or squeeze dry. Dried paint in a sleeve ruins the finish it lays next use.