-
Megapoxy 254Vendor:
Megapoxy 254 is a white, non-sag epoxy adhesive paste for bonding and repairing concrete, metal, brick, fibre cement, ceramics and natural stone. Its thick, creamy consistency stays in place on vertical and overhead surfaces, while the non-staining formulation makes it useful for white marble...- $595.60
- $595.60
- Unit price
- per
-
Megapoxy H - N35 GreyVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy liquid for bonding new concrete to existing concrete, anchoring steel and repairing cracks in damp or wet conditions. It complies with AS/NZS 4020:2018 for structures in contact with drinking water.Wet-condition concrete bonding and repairUse H for wet-to-dry...
- From $192.96
- From $192.96
- Unit price
- per
-
N35 Grey
-
Natural
-
Megapoxy HTVendor:
Megapoxy HT is a hydrophilic, non-sag epoxy gel for structural bonding and concrete repair where the surface is damp, wet or submerged. Unlike a runny injection resin, its gel consistency holds on vertical and overhead faces and can be applied in thicker layers.Wet and...
- From $197.13
- From $197.13
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a non-sag, two-part epoxy paste for structural concrete repairs, gap filling and bonding steel, stone and precast elements. Its very low-VOC formulation complies with AS/NZS 4020:2018 for use in structures in contact with drinking water.Concrete, tank and pipe repairsUse P1 to...
- From $83.99
- From $83.99
- Unit price
- per
-
Megapoxy PF - WhiteVendor:
Megapoxy PF is a rapid-setting, non-sag epoxy paste for urgent concrete, stone and metal bonding or repairs. It sets in approximately seven minutes and develops more than half its ultimate strength within 15 minutes of mixing at 25°C.Fast repairs where holding time mattersUse PF...
- From $106.70
- From $106.70
- Unit price
- per
-
White
-
Grey
-
Megapoxy PM - WhiteVendor:
Megapoxy PM is a two-part, non-sag epoxy adhesive paste for bonding precast concrete, stone, metal, brick and fibre cement. Its creamy consistency holds on vertical and overhead faces and is formulated not to stain light-coloured marble or ceramics when mixed correctly.Bonding and rebuilding on...
- From $83.99
- From $83.99
- Unit price
- per
-
White
-
Grey
Frequently Asked Questions
What are these products for?
Repairing and sealing pipes, tanks, and water structures. The Megapoxy range is for concrete pipe and tank repair, including underwater and rapid-set work. Nitoseal SC600 is a silicone sealant for pool and plumbing joints.
Can I use these on drinking water?
Several are certified to AS/NZS 4020 for potable water contact. Megapoxy H, Megapoxy P1, and Nitoseal SC600 all carry that certification. Check the current certificate and the approved substrates on the product page before you use it on a drinking-water system.
Which product do I use for a sewage or wastewater repair?
Megapoxy H, HT, and P1 resist the hydrogen sulphide gas found in sewage systems. Megapoxy PM and PF handle concrete pipe and tank repairs, including underwater cure.
Can any of these fix an active leak?
Megapoxy PF is a rapid-set paste for emergency repairs to concrete, pipes, and tanks. Megapoxy PM holds its strength underwater once cured, so it suits leaks you cannot fully dry out first.
What is the difference between Nitoseal SC600 and the Megapoxy epoxies?
SC600 is a silicone sealant. It flexes, so it seals moving joints in pools, plumbing, and tanks. The Megapoxy products are two-part epoxies. They bond, grout, and coat rigid surfaces. Use SC600 for a joint that moves, and Megapoxy for a rigid repair.