-
Adheseal Unobond Polyurethane AdhesiveVendor:
Adheseal Unobond is a single-pack, solvent-free, moisture-curing D4 polyurethane adhesive for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. Its gel consistency makes this cartridge-applied polyurethane glue easy to control on close-fitting joints, while the cured bond is...- From $17.65
- From $17.65
- Unit price
- per
-
Adheseal Unobond FC Polyurethane AdhesiveVendor:
Adheseal Unobond FC is a fast-setting, single-pack D4 liquid polyurethane adhesive supplied in a 6 kg bulk format for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. It is designed for higher-volume workshop and fabrication use where a...
- $173.55
- $173.55
- Unit price
- per
-
Adheseal Multi-Grip Construction AdhesiveVendor:
For sub-floor and wall installations where movement, joint squeaks, and sheet sagging are common installation problems, Multi-Grip Construction Adhesive provides a high initial grab acrylic bond. It complies with AS 2753 for fixing plasterboard wallboards and AS 2329 for fixing other wallboards, curing via...
- From $7.56
- From $7.56
- Unit price
- per
-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
For high-load installations, vertical panels, and joints subject to constant vibration or deformation, Xtraseal MS-609 MS Polymer Adhesive provides an immediate 1-second grab without requiring temporary supports for most lightweight components. This single-part, moisture-curing hybrid polymer remains permanently elastic after curing and adheres reliably...
- From $11.03
- From $11.03
- Unit price
- per
-
Adheseal Allflex 101 Hybrid Acrylic SealantVendor:
For sealing and adhering interior and exterior building joints subject to movement, Allflex 101 Hybrid Acrylic Sealant provides a clear finish that cures by water evaporation. It applies white for high visibility during installation and transitions to clear as it dries. The formulation is...
- From $11.01
- From $11.01
- Unit price
- per
-
Adheseal Gap Filla Acrylic SealantVendor:
For sealing gaps around internal window and door frames, cornices, plasterboard, sidings, vents, and tiles, Gap Filla Acrylic Sealant provides a flexible seal where rigid fillers are prone to cracking and falling out. How it works Gap Filla is an acrylic polymer sealant that...
- From $3.15
- From $3.15
- Unit price
- per
-
Adheseal Multi-Tack Acrylic SealantVendor:
For fixing wallboards, timber flooring, and interior mouldings where joint movement can cause squeaks or structural warping, Adheseal Multi-Tack Acrylic Sealant provides a high-strength, flexible bond. This water-based adhesive complies with AS:2753 for fixing plasterboard wallboards and AS:2329 for fixing other wallboards, ensuring compliant...
- From $3.83
$3.65- From $3.83
- Unit price
- per
-
Adheseal Primer 50AVendor:
For high-liability installations on non-porous substrates where maximum performance and longevity are required, Primer 50A is a fast-drying adhesion promoter. This clear alcohol solution is a single-pack, ready-to-use wipe that prepares difficult-to-bond surfaces for Polyurethane, MS, Silicone, and acrylic sealants and adhesives. How it...
- $53.03
- $53.03
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Everflex Polyurethane Supaprime is a porous substrate primer for caulking, civil construction, and waterproofing. One litre covers 5 to 10 square metres depending on porosity, and its very low viscosity sinks deep into concrete, masonry, and timber to give sealants and membranes a stable,...
- $59.51
- $59.51
- Unit price
- per
-
Everbond General Purpose PVAVendor:
For cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance...
- From $60.48
- From $60.48
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
For bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing. How it works Everbond Melamine PVA Adhesive is a high-solids PVA/EVA-based adhesive...
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $72.58
- From $72.58
- Unit price
- per
-
Everbond Spray Contact SP-230Vendor:
For laminate and foam fabrication, auto upholstery, and transport vehicle assembly, Everbond Spray Contact SP-230 provides a fast-drying, highly heat-resistant bond. Formulated as a one-component polychloroprene adhesive, it delivers rapid initial grab and a strong bond capable of holding materials with high spring-back forces,...
- From $183.65
- From $183.65
- Unit price
- per
-
Everbond Brush Contact AdhesiveVendor:
For laminate and foam fabrication where rapid assembly and immediate bond strength are required, Everbond Brush Contact Adhesive is a thixotropic polychloroprene contact adhesive. It forms a high-strength, water-resistant bond with high initial grab, designed to secure materials under tension, such as cover trims...
- From $81.85
- From $81.85
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
For automotive upholstery, furniture manufacturing, and commercial assembly where visible glue lines must be avoided, Everbond Ultra Clear Brush Contact is a thixotropic contact adhesive that dries completely clear. This one-component polychloroprene formula provides high initial strength and rapid bonding, making it suitable for...
- $298.28
- $298.28
- Unit price
- per
-
Everbond Styrobond STVendor:
For bonding sheet metals, fibre cement sheet, plywood, and particle board to expanded polystyrene foam, Everbond Styrobond ST is a spray-grade contact adhesive formulated with specialised solvents that will not melt or degrade the polystyrene substrate. Its low viscosity allows application through conventional spray...
- $279.60
- $279.60
- Unit price
- per
-
Everbond 2P CrosslinkerVendor:
For high-strength laminating, rubber bonding, and construction joints subjected to elevated temperatures, Everbond 2P Crosslinker (Part B) is mixed with Everbond 2P (Part A) to create a tough, flexible contact adhesive bond. The crosslinking chemical reaction increases both the physical shear strength and the...
- $22.00
- $22.00
- Unit price
- per
-
Adheseal IPA CleanerVendor:
For prep work prior to applying adhesives, sealants, or surface primers, Adheseal IPA Cleaner removes surface contaminants to ensure a clean substrate and a reliable bond. This 100% isopropyl alcohol cleaner removes fluxes, light oils, grime, and oxides, then evaporates within seconds without leaving...
- From $17.50
- From $17.50
- Unit price
- per
-
Window PackersVendor:
Horseshoe plastic packers for levelling and spacing around bolts and fixings. Slide one in around the bolt without removing it, and the frame or panel sits at true height and square before you tighten it off.Glazing frames, facade panels, cladding, doors: anywhere a fixing...
- From $48.97
- From $48.97
- Unit price
- per
-
Megapoxy 69Vendor:
For high-load structural joinery, marine assembly, and stone fabrication where components are subject to repeated high-impact forces, Megapoxy 69 provides a permanent bond with a non-sag, gel-type consistency. It secures metals, timber, granite, marble, and fibreglass on vertical and overhead surfaces without slumped joints...- From $85.39
- From $85.39
- Unit price
- per
-
Sikaflex 11 FC + Polyurethane Adhesive and SealantVendor:
For horizontal and vertical joints that experience physical movement, or assembly jobs requiring a direct bond between concrete, masonry, stone, ceramic, wood, metal, or glass, Sikaflex 11 FC + Polyurethane Adhesive and Sealant provides a single-component, elastic polyurethane barrier and adhesive. Formulated with i-Cure...- From $277.80
- From $277.80
- Unit price
- per
-
MapePUR Universal Foam M/GVendor:
For sealing door and window frames, roller-blind housings, and structural gaps against air leaks and heat loss, MapePUR Universal Foam M/G provides a rapid-hardening polyurethane barrier. It expands on contact with atmospheric moisture to fill deep cavities, forming a stable closed-cell structure that adheres...- From $16.33
- From $16.33
- Unit price
- per
-
Handyman Cartridge Caulking Gun Type 20Vendor:Adheseal ToolsA steel-framed manual cartridge gun for maintenance sealing: bathroom silicone, acrylic gaps, trim adhesive. The rigid cradle stops the cartridge sliding under pressure, so the bead stays even for the length of the tube.A step up from plastic guns for toolboxes that get used...
- $21.99
- $21.99
- Unit price
- per
Filter By Products
Frequently Asked Questions
Which glue for cabinet carcases?
Everbond General Purpose PVA. It grips close-fitting timber joints under normal clamp pressure, sands clean and will not creep under finish. For wet areas, use Everbond PVA Xlink 3 instead: it is the cross-linking grade with water resistance.
Which adhesive for exterior timber joinery?
Unobond polyurethane. It carries D4 water resistance and survives a 72-hour boiling water test. It foams as it cures, so clamp the joint for the stated time. Unobond FC is the fast-cure version for demanding outdoor work.
What glue sticks melamine-faced board?
Everbond Melamine PVA. It is formulated for non-porous melamine faces, laminate and board assembly: kitchen cabinets, drawers and furniture. For HPL and edge banding on board, a contact adhesive is the other proven route.
How do I bond laminate to board?
Use a contact adhesive such as Everbond Brush Contact or SP-230 spray. Coat both faces and let the solvent flash off for three to five minutes. Press the faces together hard while both films are touch dry. Ventilate while the solvent dries.
What holds panels without bracing?
MS-609 Fast Grab or Multi-Grip construction adhesive. Both grab on contact and hold light panels and fixtures while the cure completes, which cuts bracing time on fit-outs. Multi-Tack suits wallboards, cornice and mouldings, including polystyrene foam.
What fills gaps and screw holes before finishing?
Adheseal Gap Filla for interior gaps, dents and edge chips. Sand it flush once cured. For joints around windows and doors that move, seal with Allflex 101 instead: it stays flexible and holds paint.