-
Megapoxy 206 UltraVendor:
Use Megapoxy 206 Ultra for heavy-duty civil engineering grouting, pile repairs, and machinery installations. It delivers 115 MPa compressive strength, bonds aggressively to concrete and steel, and complies with AS/NZS 4020 for drinking water contact, even curing reliably in damp conditions.- From $159.57
- From $159.57
- Unit price
- per
-
Megapoxy CT5Vendor:
Megapoxy CT5 is an Australian-made compound designed for backfilling and encapsulating inductive detector loops, weigh-in-motion sensors, and Aircraft Landing Lights on asphaltic and concrete roadways.
- $605.72
- $605.72
- Unit price
- per
-
Megapoxy HICBVendor:
Use Megapoxy HICB for heavy-duty backing and grouting in crushers and mills. Its 115 MPa compressive strength and 20 MPa steel bond provide critical impact and structural reinforcement, preventing movement and extending equipment life where standard grouts fail.
- $148.06
- $148.06
- Unit price
- per
-
RLA Penatech HS GroutVendor:RLAUse RLA Penatech HS Grout for critical structural grouting from 10mm to 150mm, ensuring non-shrink performance with dual expansion and compressive strengths up to >85 MPa. It meets ASTM C1107-91 and handles dynamic loads, providing a reliable, stain-free solution.
- $53.15
- $53.15
- Unit price
- per
-
RLA Penatech HES GroutVendor:RLAUse RLA Penatech HES Grout for critical support and anchoring applications requiring fast load bearing. It delivers over 60 MPa compressive strength in 24 hours with dual-stage shrinkage compensation and AS1478 Class C compliance.
- $70.86
- $70.86
- Unit price
- per
-
RLA Penaflow Panel GroutVendor:RLAUse RLA Penaflow Panel Grout for high-strength, non-shrink structural support, achieving over 55 MPa compressive strength at 28 days with controlled plastic state expansion for reliable load transfer.
- $23.24
- $23.24
- Unit price
- per
-
RLA UW Penaflow GroutVendor:RLAUse RLA Penaflow Panel Grout for critical non-shrink grouting of precast elements, anchor bolts, and voids. It delivers over 55 MPa strength at 28 days with 0% bleed and consistent plastic state expansion.
- $71.94
- $71.94
- Unit price
- per
Frequently Asked Questions
What is grout used for in civil construction?
Grout fills voids, anchors fixtures, and encapsulates reinforcement where a solid bond is needed. Cementitious grouts suit most floor and interface works. Epoxy grouts handle chemical exposure and heavy loading. Match the product to the substrate and the load before you mix.
How do I choose between cementitious and epoxy grout?
Cementitious grout is the default for most civil fills and anchor beds. It cures by hydration and tolerates normal site conditions. Choose epoxy for chemical resistance, faster return to service, or higher load transfer. Check the product data sheet for exposure and loading limits.
What prep do I need before pouring grout?
The substrate must be clean, sound, and shaped for the pour. Remove loose material, dust, and standing water. Set your formwork or anchor template first. Follow the product mix and placement sequence. If the base is cracked or moving, fix that before you grout.
Can I use grout to fix a cracked slab?
Not on its own. Grout fills a prepared void or bed; it is not a crack repair system. A cracked slab needs the crack assessed and the right repair product specified first. Use grout after the repair for a filled or anchored detail.
Do you stock anchor grout for heavy equipment?
We stock anchor and load-transfer grouts including Megapoxy ranges. For heavy or critical machinery, check the anchor design and the grout load rating before you order. If the install spec comes from an engineer, follow that spec and confirm the product matches.
How long does grout take to cure?
Cure time depends on the product, the mix, and the site temperature. Cementitious grouts gain strength over days; epoxy grouts set faster. Do not load the grout before the product data sheet allows it. Cold or damp conditions slow the cure.