-
Everbond General Purpose PVAVendor:
For cabinetry, shopfitting, and joinery applications requiring a sandable, non-staining timber bond, Everbond General Purpose PVA provides a reliable joint that cures to a hard, translucent film. This synthetic resin adhesive is formulated for standard workshop assembly, laminating, and veneering where high moisture resistance...- From $60.48
- From $60.48
- Unit price
- per
-
Everbond Melamine PVA AdhesiveVendor:
For bonding melamine faced board and laminates in cabinet making and furniture construction, Everbond Melamine PVA Adhesive provides the high-solids adhesion required to join non-porous melamine surfaces to timber substrates without failing. How it works Everbond Melamine PVA Adhesive is a high-solids PVA/EVA-based adhesive...
- From $105.18
- From $105.18
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $72.58
- From $72.58
- Unit price
- per
Frequently Asked Questions
Which PVA for general workshop use?
Everbond General Purpose PVA. Strong bond on close-fitting timber with normal clamp pressure, sands clean, and costs less per litre than the specialty grades.
Why a special PVA for melamine and MDF?
Engineered board absorbs standard PVA unevenly and starves the bond line. The melamine formula is thickened to stay where it is spread on porous board.
When does Xlink 3 earn its higher price?
Anywhere moisture will reach the joint: vanities, laundry cabinetry, exterior joinery. Cross-linking chemistry resists water that softens standard PVA. Match the product spec to the job conditions before you start.
How should I store open PVA containers?
Seal the lid tight and keep the bottle off concrete in frost-free storage. PVA left open skins over and loses bond strength within weeks.
Can I thin PVA with water for a first coat?
A little water helps it wet into end grain as a primer coat. Thin only slightly; heavy thinning weakens the glue line and slows the clamp-time set.