-
Ardex FG8 Tile GroutVendor:
Use Ardex FG8 for flexible, mould-resistant grouting of tile joints from 1mm to 8mm wide on walls and floors. Its polymer-fortified, CG2W classified formulation provides over 4 MPa flexural strength at 28 days, reducing cracking and offering a smooth, easy-to-clean finish.- From $28.09
- From $28.09
- Unit price
- per
-
Ardex FS-DD Tile Grout 5kgVendor:
Use ARDEX FS-DD for grouting fine tile joints up to 4mm, particularly in wet areas and on timber floors. It is water repellent, dirt resistant, and contains ARDEX Grout Shield to combat mould, offering 20 MPa compressive strength and walk-on time in 5 hours.
- $32.13
- $32.13
- Unit price
- per
-
RLA Luminous Grout SSGVendor:RLAStandard-set CG2W tile grout for 1–15 mm internal, external and immersed joints, with a respirable silica free formulation and 45 minutes–1 hour pot life.
- From $26.40
- From $26.40
- Unit price
- per
-
Mapei Keracolor FF Bioblock GroutVendor:
Use Mapei Keracolor FF Bioblock for grouting tile joints up to 6mm, especially in wet or high-traffic areas. Its CG2WA classification confirms high abrasion resistance and low water absorption, preventing mould and ensuring a durable finish.- From $15.33
$19.17- From $15.33
- Unit price
- per
-
Mapei Keracolor GG Cementitious GroutVendor:
Use Keracolour GG for grouting tile joints from 4 to 15 mm, internally and externally. Its CG2WA classification confirms high abrasion resistance and reduced water absorption, ensuring durability against freeze/thaw cycles and heavy traffic.
- From $27.98
- From $27.98
- Unit price
- per
Frequently Asked Questions
What is the difference between cement grout and epoxy grout?
Cement grout uses a Portland cement base and suits most wall and floor applications. Epoxy grout uses a resin base and resists stains, chemicals, and water absorption. Epoxy grout costs more but needs no sealer and suits wet areas and commercial kitchens.
Which grout is silica-free?
Luminous SSG is the only silica-free grout in this range. It also holds Green Tag certification for low environmental impact. Use it where you need to eliminate respirable silica dust during mixing and application.
Which grout can I walk on the fastest?
Mapei Ultracolour Plus allows foot traffic in three hours, the fastest in this range. It is also the only grout without Portland cement, which eliminates efflorescence risk. Most cement-based grouts need 24 hours before traffic.
Which grout is best for wide joints?
Ardex WJ50 fills joints up to 50 mm wide, the widest in this range. It suits external paving and natural stone with large joint widths. For standard wall and floor tiles, most grouts handle joints from 1 to 15 mm.
Is there a non-sanded grout for narrow joints?
Yes. Ardex FS-DD is a fine non-sanded grout for wall tile joints from 1 to 5 mm. Use it for polished marble, glass mosaics, and other scratch-sensitive tiles where sanded grout would damage the surface.
Do I need to seal cement grout?
Most cement-based grouts benefit from a penetrating sealer after curing, especially in wet areas. Epoxy grout needs no sealer. Check the product data sheet for the grout you choose, as some cement grouts have additives that reduce sealing needs.