-
Megapoxy HVendor:
Use Megapoxy H for high-strength concrete and steel repairs, especially where potable water contact or wet conditions are present. Its AS/NZS 4020:2018 compliance and hydrophilic properties ensure performance and peace of mind in critical infrastructure applications.- From $193.22
- From $193.22
- Unit price
- per
-
Megapoxy 34Vendor:
Use Megapoxy 34 for high-performance electrical encapsulation and cable jointing where AS3100 compliance and a 150°C peak service temperature are critical. It delivers 315 kV/cm dielectric strength for demanding applications.
- From $152.50
- From $152.50
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy LVSVendor:
Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy PFVendor:
Use Megapoxy PF for rapid set, high-strength bonding and repairs on concrete, metal, and stone. It sets in 7 minutes, achieves 90% cure in 1 hour at 25°C, and offers 70 MPa compressive strength for demanding structural applications.
- From $106.84
- From $106.84
- Unit price
- per
-
Megapoxy PMVendor:
Use Megapoxy PM for non-sag, high-strength bonding and filling on vertical or overhead surfaces, including natural stone where a non-staining finish is critical. It delivers 80 MPa compressive strength and cures reliably even in cold or damp conditions.
- From $80.50
- From $80.50
- Unit price
- per
-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.
- From $195.36
- From $195.36
- Unit price
- per
-
Everflex VBS Water-based Epoxy PrimerVendor:
Use Everflex VBS as a 2-part water-based epoxy primer and negative pressure vapour barrier for damp or green concrete. It withstands up to 25m (250 kPa) hydrostatic pressure and allows overcoating in 4-24 hours, preventing moisture-related system failures and accelerating project timelines.- $440.44
- $440.44
- Unit price
- per
-
Everflex Multi-Prime Acrylic PrimerVendor:
Use Everflex Multi-Prime for preparing both porous and non-porous substrates before applying waterproofing membranes, tile adhesives, or levelling compounds. It offers rapid 1-hour drying and system compatibility, reducing callbacks and speeding up project timelines.
- From $71.69
- From $71.69
- Unit price
- per
-
EverKrete Concrete Repair System Trade KitVendor:EverKreteUse EverKrete Concrete Repair System Trade Kit for rapid, high-strength concrete repairs. It achieves full traffic in 45-90 minutes at 25°C and offers over 70 MPa compressive strength, significantly reducing site downtime.
- $283.33
- $283.33
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Use Megapoxy 206 Ultra for heavy-duty civil engineering grouting, pile repairs, and machinery installations. It delivers 115 MPa compressive strength, bonds aggressively to concrete and steel, and complies with AS/NZS 4020 for drinking water contact, even curing reliably in damp conditions.
- From $159.57
- From $159.57
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:RLAUse RLA TruLevel Fine Finish for rapid skim smoothing of internal concrete and masonry substrates up to 3mm thick. It provides a smooth base ready for floor coverings in just 20 minutes, ensuring quick project turnaround without compromise.
- From $126.07
- From $126.07
- Unit price
- per
-
RLA TruLevel TuffTopVendor:RLAUse RLA TruLevel TuffTop for rapid, high-strength internal and external concrete levelling from 3-30mm, allowing foot traffic in 3-4 hours and floor coverings in 18 hours, certified CT-C40-F8 for commercial demands.
- $82.01
- $82.01
- Unit price
- per
-
RLA Aftek TruLevel BulkFill UTVendor:RLAUse RLA TruLevel BulkFill UT to correct deep imperfections on internal concrete substrates, achieving a strong, level surface from 3mm to 70mm. It provides a robust, pumpable base with high mechanical resistance, ready for most floor coverings in 24-36 hours.
- $47.39
- $47.39
- Unit price
- per
-
Armadillo DVendor:ArmadilloUse Armadillo D to densify and dustproof concrete floors, chemically reacting with the substrate to create a harder, more abrasion-resistant surface. It is after-trades compatible and Green Star compliant for enhanced project outcomes.
- $283.67
- $283.67
- Unit price
- per
-
X’traseal MS-608 MS Polymer AdhesiveVendor:
Use X'traseal MS-608 for bonding parquetry to almost any subfloor, including damp surfaces. Its 800% elongation at break accommodates timber movement, while offering 0.90 mPa wood-to-wood lap shear strength and sound dampening.
- From $10.90
- From $10.90
- Unit price
- per
-
Parquetry PS1300 Flooring AdhesiveVendor:
Use Parquetry PS1300 for bonding various timber flooring to wood or concrete, including Greenstar projects. Its Hybrid PU chemistry provides a 60-minute working time, 3.5mm/24HR cure rate, and excellent primerless adhesion, preventing flooring failures related to movement and VOC non-compliance.
- $270.00
- $270.00
- Unit price
- per
-
Adheseal Unobond Polyurethane AdhesiveVendor:
Use Unobond for structural, D4 water-resistant bonds in demanding timber and mixed-material construction. Its fast-setting, moisture-curing polyurethane chemistry ensures a resilient, long-lasting joint for marine, exterior, and general construction applications.
- From $17.65
- From $17.65
- Unit price
- per
-
Adheseal Unobond FC Polyurethane AdhesiveVendor:
Use Adheseal Unobond FC for structural, D4 waterproof bonding of timber, metal, and common construction materials. It sets fast in 1-2 hours and achieves 5 N/mm² tensile strength, ideal for exterior and marine applications.
- $173.55
- $173.55
- Unit price
- per
-
Adheseal EP Waterproofing SystemVendor:
Penetrating, non-film forming polyester-polymer treatment that waterproofs and hardens concrete, brick, render and most masonry from within. Spray applied at ~5–7 m²/L, passes negative hydrostatic pressure to 60 psi, paintable once dry.
- From $150.00
- From $150.00
- Unit price
- per
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
🚛 Flat Rate Shipping $17.95+ GST For Metro & standard delivery zones! Excludes remote/regional and high-cost postcodes (including parts of QLD, WA, NT & TAS), and bulky or heavy items. Online only. Learn More
What's Popular
Vendor:
Use Adheseal PU15 for flexible, durable sealing of movement and connection joints up to ±30% and as an adhesive, offering excellent adhesion and weather resistance for confident, long-term performance.
- From $11.99
- From $11.99
- Unit price
- / per
Vendor:
Use Adheseal PU25FC for flexible sealing and bonding of movement joints in construction, marine, and manufacturing. It offers ±25% movement, fast curing at 3mm per day, AS/NZS 4020 potable water suitability, and is UV stable.
- From $11.12
- From $11.12
- Unit price
- / per
Vendor:
Use Adheseal PU50FC for high-strength, flexible structural bonding and demanding sealing jobs. It offers Shore A 45 hardness for anti-pick applications, withstands +/- 25% joint movement, and cures at 3mm per 24 hours.
- From $14.96
- From $14.96
- Unit price
- / per
Flooring
Timber flooring, raised decking, wet areas, concrete slabs — this range covers the adhesives, membranes, pedestals and installation tools that keep flooring systems performing on Australian sites. From hybrid PU parquetry adhesives with 60-minute working time to MS polymer options that handle 800% elongation, the adhesive selection is built around...
Timber flooring, raised decking, wet areas, concrete slabs — this range covers the adhesives, membranes, pedestals and installation tools that keep flooring systems performing on Australian sites. From hybrid PU parquetry adhesives with 60-minute working time to MS polymer options that handle 800% elongation, the adhesive selection is built around substrate compatibility and movement capacity, not marketing claims.
The waterproofing side spans Class III elastomeric membranes compliant to AS 4858 and AS 4654.1 for balconies, rooftops and permanently wet areas, with negative-side vapour barriers for damp or green concrete. Pedestal systems with integrated slope correction handle raised outdoor flooring, while backing rods, primers and caulking guns round out the installation essentials — everything needed to get the job done first-time-right.
Sidebar
Frequently Asked Questions
Translation missing: en.t:sections.general.no_content
Recently Viewed Products
- Choosing a selection results in a full page refresh.