-
Adheseal Unobond Polyurethane AdhesiveVendor:
Adheseal Unobond is a single-pack, solvent-free, moisture-curing D4 polyurethane adhesive for structural timber bonding, joinery, furniture and cabinet manufacture, exterior woodwork and wooden boat building. Its gel consistency makes this cartridge-applied polyurethane glue easy to control on close-fitting joints, while the cured bond is...- From $16.69
- From $16.69
- Unit price
- per
-
Everflex PU240 Polyurethane Adhesive and Sealant - WhiteVendor:
Everflex PU240 is a fast-curing, single-component polyurethane adhesive and sealant for building maintenance, construction joints and marine repairs. Supplied in a convenient 300 mL cartridge, it creates a tough yet flexible bond or joint seal on suitably prepared construction materials, including masonry, timber, metal...
- From $14.63
- From $14.63
- Unit price
- per
-
White
-
Grey
-
Black
-
Adheseal High Power 609 Instant Grab AdhesiveVendor:
Adheseal High Power 609 is a high-initial-grab MS polymer adhesive for fixing panels, signs, trims and other compatible components where holding power during installation matters. It bonds a wide range of prepared building and fabrication materials, then moisture-cures to a flexible joint that can...
- From $17.78
- From $17.78
- Unit price
- per
-
Xtraseal MS-609 MS Polymer AdhesiveVendor:
X’traseal MS-609 is a high-initial-grab MS polymer adhesive for fixing compatible mirrors, skirting boards, decorative wall panels, thresholds and building components. It offers strong early hold with an elastic cured bond, making it useful for vertical assembly where conventional wet adhesives tend to slip.Choose...
- From $12.41
- From $12.41
- Unit price
- per
-
Adheseal Autoshield ActivatorVendor:
Autoshield Activator AP1001 is a clear surface-treatment wipe for polyurethane autoglass bonding. It improves adhesion to compatible glass and lacquered surfaces before the specified primer or polyurethane windscreen adhesive is applied.Choose the Activator where the Autoshield glazing system calls for surface activation, particularly on...
- From $48.82
- From $48.82
- Unit price
- per
-
Adheseal Multi Tack Acrylic SealantVendor:
Adheseal Multi-Tack is a water-based acrylic construction adhesive for bonding floor sheeting, wallboards, timber framing, cornices and mouldings. It cures to a flexible bond that helps accommodate normal movement in timber and sheet-material assemblies, making it useful on subfloors where squeaks can develop as...
- From $4.08
$3.65- From $4.08
- Unit price
- per
-
Adheseal Primer 50AVendor:
Adheseal Primer 50A is a clear, fast-drying adhesion-promoter wipe for non-porous surfaces before selected polyurethane, MS polymer, silicone and acrylic sealants or adhesives. It is particularly useful on powder-coated metal and other difficult-to-bond finishes where surface preparation can determine the success of the joint.Choose...
- $46.76
- $46.76
- Unit price
- per
-
Everflex Polyurethane SupaprimeVendor:
Everflex Supaprime is a single-part, moisture-curing polyurethane primer for porous concrete, masonry, render, cement sheet and compatible timber surfaces. It helps improve adhesion before specified polyurethane, Hi-Flex MS polymer and silicone sealants, as well as selected Everflex waterproofing membranes.Choose Supaprime when porous construction materials...
- $61.22
- $61.22
- Unit price
- per
-
Autoshield GB Autoglass PrimerVendor:
Autoshield GB Autoglass Primer is a black automotive glazing primer used to prepare compatible glass and vehicle bond surfaces for polyurethane windscreen adhesive. Its opaque film helps shield exposed polyurethane bond lines from UV and is used in suitable pinchweld repair details.Choose GB Primer...
- $63.20
- $63.20
- Unit price
- per
-
Everbond PVA Xlink 3Vendor:
For woodworking, cabinetry, shopfitting, and joinery applications requiring a water-resistant bond, Everbond PVA Xlink 3 is a single-component, self-crosslinking adhesive that conforms to AS 2754.2 1991 and EN204. It bonds all types of timber without staining, and cures under ambient or hot press conditions...
- From $69.30
- From $69.30
- Unit price
- per
-
Everbond Spray Contact SP-230 - NaturalVendor:
Everbond SP-230 Spray Contact is a solvent-based polychloroprene adhesive formulated for spray application to compatible upholstery foam, flexible coverings and laminates. It is suited to workshop and production-line jobs where even coating and quick contact bonding help keep assembly moving.SP-230 is particularly useful for...
- From $197.14
- From $197.14
- Unit price
- per
-
Natural
-
Red
-
Everbond Brush Contact AdhesiveVendor:
Everbond Brush Contact Adhesive is a solvent-based, brushable contact adhesive for decorative laminates, bench tops, upholstery foam and fabrication trim. Coat both mating faces, let the solvent flash off and press the surfaces together to create an immediate contact bond. Its thicker application feel...
- From $82.06
- From $82.06
- Unit price
- per
-
Everbond Ultra Clear Brush ContactVendor:
Everbond Ultra Clear Brush Contact is a clear-drying contact adhesive for upholstery, trim and fabrications where a visible glue line would spoil the finished appearance. The brushable polychloroprene adhesive provides fast initial grip after flash-off, making it useful for carefully positioned foam, fabric, neoprene...
- $299.08
- $299.08
- Unit price
- per
-
Everbond Styrobond STVendor:
Everbond Styrobond ST is a specialist contact adhesive for bonding expanded polystyrene (EPS) foam to compatible sheet materials, including metal, fibre-cement, plywood and particleboard. It is designed for foam-laminating jobs where a conventional solvent contact adhesive could damage or dissolve the polystyrene.Choose Styrobond ST...
- $280.35
- $280.35
- Unit price
- per
-
Biyseal Bitumen Impregnated FoamVendor:
Biyseal Bitumen Impregnated Foam is a preformed, compressible polyurethane foam strip for sealing construction joints, metal cladding and roofing details against draughts, dust and moisture. Instead of relying on an adhesive bead, the bitumen-impregnated foam seals by pressing outward against the sides of the...
- From $141.35
- From $141.35
- Unit price
- per
-
Diggers AcetoneVendor:DiggersUse Diggers Acetone when you need a fast-evaporating solvent for cleaning PVC pipe before gluing, removing stubborn adhesives or cleaning fibreglass tools. It dries quickly, mixes completely with water and is intended for cleaning rather than surface coating or protection. Why this product exists...
- From $23.36
- From $23.36
- Unit price
- per
-
Adheseal IPA CleanerVendor:
Adheseal IPA Cleaner is a 100% isopropyl alcohol surface preparation cleaner for removing light oils, grease, flux and grime before applying compatible primers, sealants or adhesives. It evaporates quickly and is especially useful before Adheseal Primer 50A on suitable non-porous surfaces.Choose IPA when a...
- From $17.56
- From $17.56
- Unit price
- per
-
Methylated Spirits 95%Vendor:
Adheseal Methylated Spirits 95% is an ethanol-based cleaning solvent for suitable trade tools, workshop equipment and compatible hard surfaces. Commonly called metho in Australia, it dries quickly and is useful where a general alcohol cleaning method is specified.Choose methylated spirits for general cleaning of...
- $147.13
- $147.13
- Unit price
- per
-
Megapoxy 108Vendor:
Megapoxy 108 is a rapid-setting liquid epoxy for bridge pile splicing and high-strength precast concrete repairs. It develops early strength quickly, making it especially useful when civil works cannot wait for a conventional structural grout to cure.Bridge piles and fast concrete repairsUse it to...- From $250.10
$0.00- From $250.10
- Unit price
- per
-
Megapoxy 69Vendor:
Megapoxy 69 is a high-strength, non-sag epoxy gel for joining natural stone, structural timber, metals and fibreglass. Its translucent, light-yellow finish allows neat, thin glue lines while providing the impact resistance needed for demanding fabrication and repair work.Mitres, joinery and mixed-material bondingUse 69 for...
- From $85.28
- From $85.28
- Unit price
- per
-
Megapoxy H - N35 GreyVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy liquid for bonding new concrete to existing concrete, anchoring steel and repairing cracks in damp or wet conditions. It complies with AS/NZS 4020:2018 for structures in contact with drinking water.Wet-condition concrete bonding and repairUse H for wet-to-dry...
- From $192.96
- From $192.96
- Unit price
- per
-
N35 Grey
-
Natural
-
Megapoxy HTVendor:
Megapoxy HT is a hydrophilic, non-sag epoxy gel for structural bonding and concrete repair where the surface is damp, wet or submerged. Unlike a runny injection resin, its gel consistency holds on vertical and overhead faces and can be applied in thicker layers.Wet and...
- From $197.13
- From $197.13
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a non-sag, two-part epoxy paste for structural concrete repairs, gap filling and bonding steel, stone and precast elements. Its very low-VOC formulation complies with AS/NZS 4020:2018 for use in structures in contact with drinking water.Concrete, tank and pipe repairsUse P1 to...
- From $83.99
- From $83.99
- Unit price
- per
-
Sikaflex® PRO - WhiteVendor:
Sikaflex PRO is a one-component, moisture-curing polyurethane sealant for movement and connection joints in concrete and masonry façades. Its ±25% movement capability helps maintain an elastic seal as building joints expand and contract. Supplied in 600ml sausages for use with a compatible foil-pack sealant...- From $16.52
- From $16.52
- Unit price
- per
-
White
-
Off White
-
Sandstone
-
Japan Beige
-
Sika® Primer-3 NVendor:
Sika Primer-3 N is a single-component, solvent-based epoxy primer that helps compatible Sika sealants and adhesives bond to porous construction substrates and selected metals. Use it where the specified Sikaflex, SikaHyflex, SikaBond, Sikasil or SikaSeal system requires this primer.Priming concrete and metal jointsSika Primer-3...
- From $71.63
$0.00- From $71.63
- Unit price
- per
-
Industrial Cleaning Rags – 10 kg - White T-ShirtVendor:Adheseal ToolsIndustrial cleaning rags supplied in 10kg bags for everyday workshop, trade and maintenance cleaning. Use them for wiping tools, cleaning up spills, removing surface dirt and general polishing or preparation work.Choose the rag grade to suit the finish: white cotton where colour transfer is...
- From $36.90
- From $36.90
- Unit price
- per
-
White T-Shirt
-
Coloured Mixed T-Shirt
-
White Cotton Shirt
-
Handyman Cartridge Caulking Gun – Type 20Vendor:Adheseal ToolsThe Adheseal Type 20 is a manual cartridge caulking gun for everyday silicone, acrylic sealant and construction adhesive jobs. Its steel frame holds the cartridge while the trigger advances the plunger, giving you control when sealing bathrooms, skirting boards and general maintenance joints.Choose this...
- $26.51
- $26.51
- Unit price
- per
-
Cordless Sausage Caulking Gun – M8504Vendor:Adheseal ToolsThe Adheseal M8504 cordless sausage caulking gun is designed to dispense suitable sealants and adhesives from 600ml foil packs without continuous manual trigger pressure. Variable-speed control lets the operator adjust the rate of application for longer joint runs and repetitive sealing work.A cordless option...
- $407.56
- $407.56
- Unit price
- per
-
Acribond Acrylic Double Sided Foam Tape - Clear - ClearVendor:Husky TapeHusky Acribond A4000 Clear Acrylic Foam Tape is a clear high-bond double-sided acrylic foam tape for acrylic, glass, signage and display work where a visible grey foam bond line is not wanted. The current A4100C construction uses 1.0 mm clear acrylic foam with strong...
- $78.13
- $78.13
- Unit price
- per
-
Clear
-
Husky Tape Acribond Acrylic Foam Tape - Grey - GreyVendor:Husky TapeHusky Acribond A3000 Grey Acrylic Foam Tape is a high-bond double-sided acrylic foam tape for mounting and joining sheet metal, exterior cladding and composite panels, signage, automotive trim and other compatible assemblies. The current A3110G construction uses 1.1 mm grey acrylic foam with strong...
- $65.45
- $65.45
- Unit price
- per
-
Grey
Frequently Asked Questions
How do I choose an adhesive or sealant for marine work?
Start with the substrates, joint movement and exposure. Check the product technical data for marine use, water exposure and material compatibility. Use the specified primer or cleaner, and follow the stated application and cure limits.
Can I use one sealant on every boat surface?
No. Aluminium, glass, timber, plastics and coated surfaces can need different products. Confirm compatibility with each substrate and coating. Test a small area when the product technical data does not give a clear answer.
Do I need a primer before I bond or seal?
Use a primer only when the product technical data specifies one for the substrate and exposure. Clean and dry the surface first. Apply the primer at the stated rate and complete the work within its stated open time.
What should I use to clean the surface?
Use the cleaner that the adhesive or sealant manufacturer specifies. A strong solvent can damage plastics, paint and coatings. Remove loose dirt first, use clean lint-free material, and let the surface dry before application.
Can I apply these products below the waterline?
Only use a product below the waterline when its current technical data permits that exposure. Do not infer immersion resistance from a marine label. Check the substrate, cure conditions and required service time before launch.