For preparing substrates before adhesive or sealant application, removing wet adhesives, and cleaning tools, Adheseal Methylated Spirits 95% is a denatured alcohol formulated for use on non-porous surfaces. It functions as a rapid-evaporating solvent that leaves no residue, ensuring a clean surface for optimal bond strength.
This solvent is a denatured alcohol with a water-thin consistency and a specific gravity of 0.9. It acts as a general-purpose cleaning agent and a thinning agent for compatible adhesive systems. Because it cures solely by evaporation, it dries quickly without requiring manual wipe-off or water rinsing, simplifying the preparation sequence on busy trade sites.
Apply the liquid to the substrate or tool using a clean lint-free cloth or appropriate applicator. For clean-up, no washing is required; simply allow the solvent to evaporate naturally into the air. Store the containers tightly closed in a cool, dry location at temperatures between 10 degrees Celsius and 35 degrees Celsius.
No, you must test on a small, inconspicuous area first. Methylated Spirits is recommended for non-sensitive, non-porous surfaces, as it can stain or damage certain materials.
Methylated Spirits is highly flammable and toxic if swallowed, inhaled, or absorbed through skin. Always use in a well-ventilated area, wear impervious gloves, safety glasses, and a respirator, and keep away from all ignition sources.
Absorb spills with sand or soil, then collect and seal in properly labelled drums. Dispose of contents and containers in accordance with local, regional, national, and international regulations through your State/Territory Land Waste Management Authority.
| Application | Key benefit | Primary trades |
|---|---|---|
| Cleaning tools and equipment | Removes fresh adhesive or sealant residues, extending tool life and maintaining equipment. | Painters, Tilers, Glaziers, Carpenters |
| Surface preparation for adhesives/sealants | Ensures clean, residue-free substrates for optimal adhesion, preventing bond failure. | Builders, Tilers, Glaziers, Waterproofers |
| Thinning specific adhesives | Adjusts viscosity for easier application without compromising product performance (check adhesive TDS). | Adhesive Applicators, Painters |
| General solvent cleaning on non-sensitive surfaces | Effective cleaning for various non-porous surfaces, provided compatibility is tested first. | Maintenance, Cleaners, Builders |
Signal Word: Danger
Wear impervious gloves (e.g., nitrile rubber), chemical goggles, and a respirator suitable for organic vapours/particulates (meeting AS/NZS 1715 and AS/NZS 1716). Wear overalls and safety shoes.
Use only in well-ventilated areas, preferably outdoors or with local exhaust ventilation. Maintain air concentrations below Exposure Standards.
Store in a cool, dry, well-ventilated, and locked-up place, away from direct sunlight, foodstuffs, and incompatible materials. Keep container tightly closed and standing upright. This material is a Class 3 Flammable Liquid and must be stored according to relevant dangerous goods regulations. Dispose of contents and containers according to local, regional, national, and international regulations.
Proper surface preparation is crucial for effective cleaning and to avoid material damage. Always test on an inconspicuous area first to ensure compatibility and prevent staining.
Surface prep: Ensure the surface is free of loose debris before applying. Wipe down with Methylated Spirits using a clean rag. Allow to evaporate completely before proceeding with subsequent applications.
Primer: Not required for cleaning applications. For thinning adhesives, follow the adhesive manufacturer's specific guidance.
| Property | Value |
|---|---|
| Product Name | Methylated Spirits 95% |
| Type Of Product | Clear Liquid |
| Curing System | Evaporation |
| Density (specific gravity) | 0.9 |
| Consistency | Water thin |
| Colours | Clear |
| Storage Temperature | 10-35°C |
| Shelf Life | 2 years minimum |
| Chemical Entity | Ethanol >=99% |
| Dangerous Goods Class | 3 |
| Packaging Group | II |
| Hazchem Code | •2YE |
| Hazard Classifications | Flammable Liquids - Category 2, Acute Toxicity - Oral - Category 3, Acute Toxicity - Dermal - Category 3, Acute Toxicity - Inhalation - Category 3, Specific Target Organ Toxicity (Single Exposure) - Category 1 |
Here are some common examples on where Adheseal Methylated Spirits 95% used by our customers.
