-
EverKrete 102Vendor:EverKreteEverKrete 102 is the high-performance resin binder at the core of the EverKrete rapid concrete repair system. This advanced, low-viscosity thermoset vinyl polymer is engineered for creating tough, durable repair mortars and overlays that cure in as little as 45 minutes, even in sub-zero temperatures. It provides exceptional penetration and a tenacious bond to concrete substrates for a permanent, high-strength repair.
- From $213.97
- From $213.97
- Unit price
- per
-
Everflex Multi-PrimeVendor:
Everflex Multi-Prime is a high-performance, water-based acrylic primer engineered for superior adhesion on both porous and non-porous substrates. Designed to prepare surfaces for tile adhesives, waterproofing membranes, self-levelling compounds, and grouts, it delivers fast dry times, low VOC compliance, and reliable long-term performance on concrete, screeds, sheeting, timber, and more.- From $68.28
- From $68.28
- Unit price
- per
-
Armadillo DVendor:ArmadilloARMADILLO D (Dustproof) is a water-based lithium/sodium silicate solution engineered to penetrate and densify concrete surfaces. Designed for use on old or new concrete floors, it enhances abrasion resistance, reduces dusting, and increases surface hardness. Ideal for warehouses, factories, car parks, and service stations seeking improved floor durability without coating or membrane systems.
- $255.30
- $255.30
- Unit price
- per
-
Gripset C-BedVendor:
Gripset C-Bed is a high-performance polymer-modified tile screed designed for internal and external use in both bonded and unbonded applications. It offers high early strength, trafficability within 24 hours, and excellent compatibility with waterproofing membranes and adhesives. Ideal for wet areas, balconies, and exposed screed beds, C-Bed provides a flexible and shrinkage-compensated solution for modern tiling systems.- $23.30
- $23.30
- Unit price
- per
-
Gripset C-1PVendor:
Gripset C-1P is a high-performance, fibre-reinforced, flexible cementitious waterproof membrane designed for both positive and negative waterproofing. With excellent crack-bridging, hydrostatic pressure resistance up to 5 bar, and compliance to AS4858, it’s ideal for basements, pools, potable water tanks, wet areas, and under-tile systems in Australian commercial, industrial, and residential projects.
- $133.22
- $133.22
- Unit price
- per
-
Gripset C-PlugVendor:
Gripset C-PLUG is a rapid-set, non-shrink cementitious plugging compound for active water leaks under pressure. Initial set occurs in about a minute with full set in 2–4 minutes, curing to the mechanical strength of concrete. Ideal for holes, cracks and joints in concrete and masonry across basements, lift pits, tanks and tunnels. Non-toxic, non-staining and grindable to contour; can be used with Gripset C-1P for long-term negative-side waterproofing.
- From $46.25
- From $46.25
- Unit price
- per
-
Gripset 11YVendor:
Gripset 11Y is a concentrated SBR latex polymer admixture that upgrades cement-based mixes for high-bond, durable, water-resistant performance. Ideal for screeds, renders, patch mortars and primer slurries in exposed, immersed and subterranean conditions. Improves flexural strength, reduces permeability and shrinkage, and accelerates early strength—delivering reliable results on demanding jobs.
- From $88.55
- From $88.55
- Unit price
- per
-
RLA Penaflow Panel GroutVendor:
RLA Penaflow Panel Grout is a general-purpose, Class A cementitious grout for grouting precast panels, anchor bolts, core holes, blockwork, and underpinning. Shrinkage compensated with gaseous expansion in plastic state, it delivers reliable void filling from 20–150 mm thickness. It can be dry packed, trowelled, poured, or pumped for larger placements, with high bond and compressive strength.- $18.62
- $18.62
- Unit price
- per
-
RLA TruLevel TuffTopVendor:
RLA TruLevel TuffTop is a high-performance, cement-based self-smoothing overlay designed to level concrete floors from 3–30mm in a single application. Engineered for internal and external use, it delivers excellent flow, high compressive strength (≥ 40 MPa at 28 days), and rapid walk-on capability in 3–4 hours. Trusted by Australian trade professionals for commercial, industrial, and domestic use, it's compatible with timber, tile, carpet, and vinyl finishes. It can also be used as a wear surface with appropriate coatings. Ideal for high-traffic areas, underfloor heating, and heavy point loads.
- $65.69
- $65.69
- Unit price
- per
-
RLA Aftek TruLevel BulkFill UTVendor:
High-build self-levelling cementitious underlay for internal concrete, 3–70 mm thick. Pumpable, rapid-setting, foot traffic in 3–4 hours, and ready for coverings within 24–36 hours. Excellent flow, high strength, and smooth finish.
- $37.97
- $37.97
- Unit price
- per
-
RLA Penapatch Panel LWVendor:
Penapatch Panel LW is a fine-filled, polymer-modified, lightweight cementitious repair mortar designed for tilt-up/precast panel plate covering and general concrete repairs. It builds up to 50 mm vertically (100 mm overhead), adheres strongly with negligible shrinkage, trowels to a smooth finish, and achieves a 4-hour fire rating at 35 mm—ready to paint or render once cured.
- $60.27
- $60.27
- Unit price
- per
-
Megapoxy 69 High Strength Epoxy Adhesive GelVendor:
Megapoxy 69 is a professional-grade, high-strength epoxy adhesive gel. Its non-sag formula provides a 70MPa compressive strength, making it the certain choice for structural bonding of metal, concrete, timber, and stone in civil engineering, joinery, and remedial applications.- From $65.82
- From $65.82
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a professional two-component epoxy paste adhesive engineered for high-strength structural bonding and repair. With a user-friendly 1:1 mix ratio and exceptional compressive strength, it provides a permanent, waterproof, and chemical-resistant bond for concrete, metal, and stone.
- From $65.82
- From $65.82
- Unit price
- per
-
Megapoxy PMVendor:
Megapoxy PM is a heavy-duty, VOC-free epoxy paste for bonding and repair across concrete, stone, metal & fibreglass — even in cold or damp.
- From $63.00
- From $63.00
- Unit price
- per
-
Megapoxy PFVendor:
Megapoxy PF is a rapid-setting, high-strength epoxy adhesive ideal for emergency repairs and quick bonding. It adheres to various materials, including concrete, metal, and stone, achieving significant strength in minutes. Perfect for on-site repairs and fast-paced projects.
- From $82.69
- From $82.69
- Unit price
- per
-
Adheseal Backing Rod Closed Cell - RoundVendor:
Adheseal Closed Cell Backing Rod is a high-quality polyethylene foam filler designed for construction joints, providing excellent support and preventing 3-sided adhesion for sealants.
- From $11.18
- From $11.18
- Unit price
- per
-
Megapoxy HVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy resin ideal for various applications, including bonding new to old concrete, crack repair, and underwater repairs. This versatile, 100% solids, solvent-free formula offers excellent mechanical properties and can be used with fine aggregates to create high-strength epoxy mortar. Megapoxy H is VOC-free and complies with AS/NZS 4020 for potable water contact, making it a safe and reliable choice for various projects.
- From $148.50
- From $148.50
- Unit price
- per
-
Aluminium AnglesVendor:
Aluminium Angle extruded in Alloy 6060 T5 with Mill Finish provides high corrosion resistance, excellent strength-to-weight ratio, and easy fabrication. Ideal for frames, caravans, shopfitting, and architectural use.
- From $6.28
- From $6.28
- Unit price
- per
-
Megapoxy HXVendor:
Megapoxy HX: 100% solids, low-viscosity epoxy for concrete crack repair, injection, and lamination. Solvent-free, hydrophilic.
- From $160.32
- From $160.32
- Unit price
- per
-
Megapoxy Pigment PasteVendor:
Highly pigmented, VOC-free epoxy colour paste ideal for matching stone and concrete finishes. Comes in a resealable 500g container.
- $42.19
- $42.19
- Unit price
- per
-
Megapoxy MCVendor:
Megapoxy MC is a two-component, 100% solids, heavy-duty epoxy coating designed for industrial and commercial applications. It offers high chemical resistance, nil VOC content, and a rapid cure option (MC2) for efficient application.
- From $121.22
- From $121.22
- Unit price
- per
-
Megapoxy HTVendor:
A structural-grade, hydrophilic epoxy gel adhesive delivering 100 MPa compressive strength. Engineered for bonding new to old concrete, crack repair, and steel anchoring, even in damp, wet, or underwater conditions. 100% solids and Nil VOC.
- From $160.32
- From $160.32
- Unit price
- per
-
EverKrete Concrete Repair System Trade KitVendor:EverKreteAdvanced thermoset vinyl polymer repair kit cures in 45–90 minutes, bonds to concrete, brick, and masonry. Ideal for trade professionals.
- $255.00
- $255.00
- Unit price
- per
-
Sunstate Dried Fine SandVendor:
Sunstate Sands Bundaberg Silica Sand offers premium 99.8 % SiO₂ purity with naturally graded F6 and F8 options. Used in foundry moulds, epoxy flooring, grouts, adhesives and textured coatings, each grade delivers precise particle control, high whiteness and low impurity content for consistent industrial performance.
- From $19.67
- From $19.67
- Unit price
- per
-
Mountain Grout Gel FoamVendor:Green Mountain InternationalMountain Grout Gel Foam is a low-viscosity, single-component hydrophilic polyurethane injection resin for active leak repairs in concrete. It reacts with water to form a foam or gel (depending on water availability), delivering high elongation sealing performance with up to 25× expansion for dependable infiltration cut-off in cracks and joints. 100% solids, no VOCs, and engineered for durable, inert seals under continuous moisture exposure.
- From $180.40
- From $180.40
- Unit price
- per
-
Megapoxy 206 UltraVendor:
Megapoxy 206 Ultra is a two-component, 100% solids epoxy grout designed for civil engineering. It offers high compressive strength, impact resistance, and excellent adhesion in challenging conditions.
- From $124.88
- From $124.88
- Unit price
- per
-
Megapoxy HICBVendor:
Megapoxy HICB is a high-strength, nil VOC epoxy grout designed for crusher backing and heavy-duty industrial applications. With rapid cure options and exceptional compressive strength, it minimizes downtime and extends machinery lifespan.
- $112.50
- $112.50
- Unit price
- per
-
Efflock Hydrophobic AdditiveVendor:EfflockVOC-free, water-based additive for screeds, adhesives, grouts, renders and concrete. Reduces water absorption, controls efflorescence, and repels contaminants while remaining vapour-permeable. Compatible with waterproofing membranes and Australian site conditions.
- From $91.95
- From $91.95
- Unit price
- per
-
Megapoxy MegabondVendor:
Megapoxy Megabond is a high-strength, Zero VOC epoxy adhesive paste. Ideal for bonding stone, tile, concrete & metal. Non-staining, tintable, 1:1 mix, easy to spread. Provides permanent structural bonds for interior/exterior applications.
- $401.63
- $401.63
- Unit price
- per
-
Megapoxy 254Vendor:
Megapoxy 254 is a two-part, non-sag epoxy filling and adhesive paste with a simple 1:1 mixing ratio. It is VOC-free and suitable for a wide range of bonding and repair applications.
- $479.25
- $479.25
- Unit price
- per
-
Mountain Grout FlexibleVendor:Green Mountain InternationalMountain Grout Flexible is a single-component, low-viscosity hydrophobic polyurethane injection resin used to permanently seal leaking cracks, voids, or fractures in concrete structures. Activated with water, it expands up to 30 times its initial volume to form a durable, closed-cell grout with excellent adhesion and resistance to wet/dry cycles. Reaction times can be controlled with the optional Accelerator “B” component, providing professional applicators with the flexibility to adapt to site conditions.
- From $180.40
- From $180.40
- Unit price
- per
-
Megapoxy LVSVendor:
Megapoxy LVS is a low viscosity, solvent-free epoxy sealer for concrete, timber, and masonry, providing excellent penetration, sealing, and waterproofing capabilities.
- From $193.33
- From $193.33
- Unit price
- per
-
RLA Penapatch HB50Vendor:
Penapatch HB50 is a polymer-modified, fibre-reinforced, shrinkage-compensated structural repair mortar formulated for vertical, overhead and horizontal concrete repairs. Achieve high build in a single pass with excellent adhesion, low permeability and high ultimate strength — just add water.
- $68.64
- $68.64
- Unit price
- per
-
Mapei UC LevellerVendor:
Mapei UC Leveller is a fast hardening levelling and smoothing compound suitable for thicknesses ranging from 3 mm to 70 mm.- $40.08
- $40.08
- Unit price
- per
-
Mapei Mapegrout T40Vendor:
Fast-setting, high-strength repair mortar for vertical and overhead concrete fixes. Potable water safe and ideal for Australian environments.
- $73.98
- $73.98
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
Mapegrout Fast-Set Rapido is a high-performance, fibre-reinforced repair mortar engineered for rapid reinstatement of deteriorated concrete. With a working time of 10 minutes and traffic-ready in as little as 3 hours, it delivers exceptional strength, adhesion, and durability for structural and non-structural concrete repairs across Australian job sites.
- $70.62
- $70.62
- Unit price
- per
-
Planitop Fine Finish MortarVendor:
Mapei Planitop Fine Finish is a one-component, rapid-hardening cementitious mortar for skimming and levelling uneven or defective concrete surfaces. Ideal for internal and external use, it applies up to 3mm thick down to a feather edge, creating a perfect, ultra-fine texture ready for painting.
- $92.00
- $92.00
- Unit price
- per
-
Cement Australia Sand & Cement (Screed)Vendor:Cement AustraliaCement Australia Sand & Cement (Screed) is a pre-blended, ready-to-use mortar mix. Simply add water for a consistent and convenient solution for various handyman, landscaping, plumbing, and repair applications.
- $12.33
- $12.33
- Unit price
- per
-
RLA Penapatch HB80Vendor:
RLA Penapatch HB80 is a high-strength, shrinkage-compensated structural repair mortar. Apply up to 80mm thick vertically in a single pass, saving time and eliminating formwork. Ideal for concrete cancer repair and structural patching.
- $78.03
- $78.03
- Unit price
- per
-
RLA Penapatch Fairing Coat MortarVendor:
A fine-textured, fast-setting cementitious fairing compound designed to correct surface defects and imperfections in concrete where only a thin layer is required. Mix with water only; apply up to 5 mm in one pass with excellent bond and negligible shrinkage, leaving a smooth finish that won’t telegraph through architectural coatings.
- $63.24
- $63.24
- Unit price
- per
-
Megapoxy 108Vendor:
An ultra-rapid, high-strength liquid epoxy for schedule-critical civil works. Achieves structural strength (>95 MPa) in just 2 hours to allow same-day resumption of pile driving. Also used for high-strength, fast repairs to precast
- From $195.75
$0.00- From $195.75
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:
Rapid-drying skim smoothing compound for featheredge to 3 mm. Accepts most floor coverings after 20 minutes. Ideal for patching uneven concrete and preparing substrates for resilient floor finishes.
- From $100.99
- From $100.99
- Unit price
- per
-
EverKrete AcceleratorVendor:EverKreteEverKrete Accelerator speeds up the curing of EverKrete 102 resin, ideal for cold conditions and fast project turnaround.
- $37.50
- $37.50
- Unit price
- per
-
Everbond Plastabond PVAVendor:
Enhance mortar and render performance with Plastabond – a PVA-based bonding agent delivering improved adhesion, reduced shrinkage, and chemical resistance.
- From $70.46
- From $70.46
- Unit price
- per
-
Everbond Acrylic Bonding AgentVendor:
Versatile bonding agent that boosts mortar strength, water resistance, and adhesion to concrete, steel, and insulation. Ideal for floor screeds and renders.
- From $104.17
- From $104.17
- Unit price
- per
-
EverKrete PrimerVendor:EverKreteEverKrete Primer is a high-performance, single-component primer offering excellent adhesion for concrete and steel, ideal for internal and external use.
- From $27.59
- From $27.59
- Unit price
- per
-
Mapei Lamposilex (Waterplug)Vendor:
Ultra-fast setting hydraulic binder for instantly stopping active water leaks, even under pressure. Plastic-thixotropic paste applies easily on verticals, sets in ~1.5 minutes at +20 °C, reaches high early strength, waterproof and water-repellent, and is suitable for potable water systems (AS/NZS 4020).
- From $47.17
- From $47.17
- Unit price
- per
-
RLA Penatech HS GroutVendor:
RLA Penatech HS Grout is a high-strength, Class C cementitious grout featuring dual expansion, superior flow, and compliance with ASTM C1107. Designed for critical structural applications including base plates, precast panels, and anchor bolts, from 10mm to 150mm thick.
- $42.57
- $42.57
- Unit price
- per
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
🚛 Flat Rate Shipping $15.95+ GST Australia-wide! Excludes rural/remote areas and bulky and heavy items. Online only. Learn More
What's Popular
Vendor:
Adheseal PU-15 is a professional-grade, low modulus polyurethane joint sealant designed for Australian trade professionals. It delivers exceptional flexibility with a movement capability of ±25%, ensuring a durable, weatherproof, and mould-resistant seal for expansion joints, window perimeters, and precast panels. This single-component, moisture-curing formula is easy to apply and tool, providing a reliable, paintable finish that you can stand behind.
- From $11.10
- From $11.10
- Unit price
- / per
Vendor:
Adheseal PU25 FC is the ultimate all-rounder for Australian trades. This fast-curing, single-component polyurethane sealant and adhesive delivers a tough, flexible, and durable bond. Certified to AS/NZS 4020 for contact with drinking water, it's the professional's choice for a huge range of applications, from construction expansion joints and window sealing to marine and automotive use. With ±25% movement capability and exceptional adhesion, it gets the job done right, first time.
- From $10.30
- From $10.30
- Unit price
- / per
Vendor:
Adheseal PU-50FC is a high-strength, fast-curing polyurethane adhesive sealant engineered for the most demanding applications. With an exceptional Shore A hardness of 50, it serves as a formidable anti-pick sealant for high-security areas like prisons and schools. Its powerful bond strength and permanent flexibility make it the professional choice for structural bonding in truck bodies, marine manufacturing, and construction where vibration and high stress are constant.
- From $13.85
- From $13.85
- Unit price
- / per
Concrete Preparation & Repairs
Use Concrete Preparation & Repairs for: Addressing cracks, spalls, uneven surfaces, structural damage, concrete bonding, anchoring, grouting, levelling, coating, and sealing concrete. Key Features of the Concrete Preparation & Repairs Range Comprehensive Solutions: A wide array of products including epoxies, cementitious mortars, grouts, levellers, sealers, and specialty repair systems...
Use Concrete Preparation & Repairs for: Addressing cracks, spalls, uneven surfaces, structural damage, concrete bonding, anchoring, grouting, levelling, coating, and sealing concrete.
Key Features of the Concrete Preparation & Repairs Range
- Comprehensive Solutions: A wide array of products including epoxies, cementitious mortars, grouts, levellers, sealers, and specialty repair systems to cover all aspects of concrete remediation and preparation.
- Professional Grade Quality: Featuring trusted brands known for high performance, ensuring durable and reliable repairs suitable for demanding commercial, civil, and residential projects.
- Versatility in Application: Products tailored for everything from fine cosmetic repairs and crack injection to heavy-duty structural rebuilding, protective coating, and precise surface levelling.
- Specialised Problem Solvers: Includes options for rapid setting, application in damp conditions (hydrophilic epoxies), high-impact resistance, efflorescence removal, and chemical resistance.
- Australian Condition Ready: Selected products demonstrate excellent performance considering factors like humidity, temperature variations, and the need for robust protection in diverse Australian environments.
Typical Applications
Products from the Concrete Preparation & Repairs collection are indispensable for a variety of trade professionals. Builders and Concrete Repair Specialists rely on these materials for repairing damaged slabs, walls, and precast elements, including spall repairs with high-build mortars, structural crack repairs using epoxy injection, and concrete bonding. Civil Construction teams utilise these solutions for infrastructure projects, such as bridge repairs, culvert linings, and heavy-duty grouting. Waterproofers will find hydrophilic epoxies and compatible repair mortars essential for remedial work in damp areas and below-ground structures. Tilers depend on our high-quality levelling compounds, screeds, and crack repair products to ensure perfect substrate preparation for durable flooring installations. Stonemasons use our epoxy adhesives for securely bonding stone to concrete substrates. Facility Managers can maintain their concrete assets effectively, addressing wear and tear promptly with these reliable repair options.
Sidebar
BY ENVIRONMENT
BY PACKAGING
BY SUBSTRATE
BY APPLICATION
BY HANDLING NOTES
Recently Viewed Products
- Choosing a selection results in a full page refresh.