-
RLA Penapatch Fairing Coat MortarVendor:RLARLA Penapatch Fairing Coat Mortar is a fine-textured, fast-setting cementitious fairing compound for thin repairs and finishing work on concrete and compatible masonry. It is designed for surface defects where only a shallow layer is needed, producing a smooth finish that can be left...
- $78.94
- $78.94
- Unit price
- per
-
RLA Penapatch HB50 MortarVendor:RLARLA Penapatch HB50 is a high-build, medium-weight, shrinkage-compensated structural repair mortar for damaged concrete and compatible masonry. It is designed for vertical, overhead and horizontal repairs where the section must be rebuilt with a high-strength, low-permeability mortar rather than a cosmetic patch. Where to...
- $85.68
- $85.68
- Unit price
- per
-
RLA Penapatch HB80 MortarVendor:RLARLA Penapatch HB80 is a high-strength, high-build, shrinkage-compensated structural repair mortar for vertical, overhead and horizontal reinstatement. Its polymer-modified cementitious formulation is designed to bond strongly to concrete and compatible masonry while providing low permeability, high abrasion resistance and long-term dimensional stability. Where HB80...
- $97.41
- $97.41
- Unit price
- per
-
RLA Penatech HS GroutVendor:RLAFor structural concrete applications subject to dynamic loads and continuous vibrations, RLA Penatech HS Grout provides a high-strength, precision Class C cementitious grouting system. It is formulated to achieve non-shrink dual expansion, compensating for volume loss in both the plastic and hardened states to...
- $53.15
- $53.15
- Unit price
- per
-
RLA Penaflow Panel GroutVendor:RLAFor structural support underneath precast concrete panels, filling core holes, and underpinning concrete sections, RLA Penaflow Panel Grout provides a shrink-compensated, Class A cementitious barrier that eliminates settlement gaps. It is formulated to expand in its plastic state to ensure complete void filling, maintaining...
- $23.24
- $23.24
- Unit price
- per
-
RLA Penapatch Panel LW MortarVendor:RLARLA Penapatch Panel LW is a lightweight, polymer-modified cementitious repair mortar for non-structural patching of precast and tilt-up concrete. It is specifically designed to cover panel joining plates and rebuild damaged concrete where a high-build mortar is needed without the weight and structural role...
- $75.23
- $75.23
- Unit price
- per
-
Mapegrout Fast-Set RapidoVendor:
When a damaged concrete edge or corner needs to be put back into service quickly, Mapegrout Fast-Set Rapido gives repair crews a fibre-reinforced mortar with a short setting time. Its thixotropic consistency helps rebuild prepared vertical and horizontal concrete without waiting for a conventional...- $65.92
- $65.92
- Unit price
- per
-
Mapei Topcem Pronto SlurryVendor:
A bonded screed is only as reliable as its connection to the concrete beneath it. Topcem Pronto Slurry creates the fresh bonding layer between prepared concrete and a compatible Topcem Pronto screed, helping the two work together rather than separating under service.Where to use...
- $27.44
- $27.44
- Unit price
- per
Frequently Asked Questions
What makes a grout non-shrink and why does it matter?
Non-shrink grout expands slightly as it cures, keeping full contact under base plates and bearers. Ordinary mortar shrinks away from the steel, leaving the bearing loose and load concentrated on edges.
Which grout when the machine returns to service tomorrow?
Penatech HES, the early-strength grade. HS carries higher ultimate strength on a normal schedule. Match the product spec to the job conditions before you start.
What repairs a floor that needs traffic back same-day?
Mapegrout Fast Set Rapido or Mapei Topcem Pronto slurry: rapid-setting formulations that accept foot and light vehicle traffic within hours, not days. Match the product spec to the job conditions before you start.
Do the repair mortars suit overhead work?
The thixotropic grades do: they hold on verticals and soffits without formwork. Check each mortar's data sheet for its per-pass build limit before committing.
Can these grouts be placed underwater?
UW PenaFlow is formulated to displace water and cure to strength in flooded bases. Standard grouts wash out underwater and must never be used there.
How thick can one pour go?
Follow each product's maximum section on its sheet. Deep pours build heat and crack; large sections go in lifts with the stated wait between them.