-
BAT Trims Tile CrossesVendor:B.A.TKeep grout joints even and tiled layouts looking sharp with B.A.T Tile Crosses. These cross-shaped plastic spacers help maintain consistent gaps between tiles as you set out walls, floors and feature areas.Choose from 1.5 mm, 2 mm and 3 mm nominal joint sizes. Smaller...
- From $3.17
- From $3.17
- Unit price
- per
-
BAT Trims Tile WedgesVendor:B.A.TTile wedges adjust spacing where a cross will not fit. The taper runs from 5mm down to a fine point, so you slide one under a tile edge to lift it level or nudge two tiles apart to widen a joint. Pull them out...
- From $6.67
- From $6.67
- Unit price
- per
-
Panther Levelling System WedgesVendor:PantherPanther Levelling System Wedges are the reusable part of the Panther tile levelling system. Insert a wedge into a compatible base clip to hold adjoining tile edges in alignment while the adhesive sets. The pack contains 250 wedges.Where to useUse with the appropriate Panther...
- $31.83
- $31.83
- Unit price
- per
-
Panther Levelling System Base ClipsVendor:PantherPanther Levelling System Base Clips help keep adjoining wall and floor tile edges aligned while the adhesive cures. Choose 1.5 mm or 2 mm nominal grout-joint spacing for tiles 3–12 mm thick. Use the clips with compatible reusable Panther levelling wedges, sold separately.Available buying...
- From $27.50
- From $27.50
- Unit price
- per
-
Panther Levelling System 1.5mm Large Base Clips – 250 PackVendor:PantherPanther Levelling System 1.5 mm Large Base Clips help keep adjoining tile edges level while adhesive cures. The larger clip base is designed for tiles 11–20 mm thick and sets a nominal 1.5 mm joint. This pack contains 250 single-use clips.Where to useUse these...
- $19.41
- $19.41
- Unit price
- per
-
DTA Flat Out Levelling System Tile Clips 1.5mmVendor:
Levelling clips stop tile lippage. Slot the clip base under two adjoining tiles, insert the Flat Out wedge with the pliers, and the clip pulls the tiles level while the adhesive cures. Break the stem off along the scored line next day and reuse...- From $27.50
- From $27.50
- Unit price
- per
Frequently Asked Questions
What is the difference between clips and spacers?
Clips and wedges form a levelling system that reduces lippage on large format tiles. Spacers set consistent grout joint gaps between tiles. Use a levelling system on floor tiles wider than 300 mm. Use spacers on standard wall tiling.
Do I need both clips and wedges?
Yes for a levelling system. The clip sits under the tile edge and the wedge locks it. Panther clips pair with Panther wedges. BAT Trims wedges work alone as standalone spacers.
What tile thickness do levelling clips support?
DTA Flat Out clips accept tiles from 2 mm to 12 mm thick. Panther clips accept tiles from 3 mm to 12 mm thick. Both leave a 1.5 mm grout joint. Thinner tiles need a system with a lower minimum.
Are wedges reusable?
Panther levelling wedges and BAT Trims tile wedges are reusable. Remove them after the adhesive sets. BAT Trims tile crosses are reusable in some applications but often stay in the joint and get covered by grout.
What temperature range do levelling systems tolerate?
DTA Flat Out clips handle 5 to 40 degrees Celsius. BAT Trims wedges handle 5 to 35 degrees. BAT Trims crosses handle minus 10 to 50 degrees. Store all systems out of direct sunlight and away from freezing.