16
Tile crosses set the grout gap between wall tiles. Push one into each junction as you lay, and every line comes out the same width. When the adhesive has set, either tap them in and grout over, or pull them out and fill the gap.
Available in 1.5mm, 2mm, and 3mm thicknesses. Pack sizes: 500, 1,000, or 2,000 pieces. As a rule of thumb, allow 25 to 35 crosses per square metre depending on tile size.
They suit straight and diagonal wall layouts, and work with any tile adhesive. No primer, no cure time: they are spacers, not chemistry.
Tile cross spacers for setting consistent grout joints. Available in 1.5 mm, 2 mm and 3 mm sizes, with current pack options from 500 to 2,000 pieces.
Choose the spacer size to match the specified grout-joint width. These are fixed spacers, not a tile levelling system.
BAT Trims Tile Crosses Physical Properties
| Property | Value |
|---|---|
| Material | Polypropylene |
| Chemical Composition | Non-reactive, Adhesive-Resistant |
| Colour | White |
| Application Temperature Range | -10°C to 50°C |
| Coverage Rate | 25–35 spacers per m² (approximate) |
| Documented Substrates | Ceramic, Porcelain, Calibrated Stone (Wall Tiles) |
| Primer Guidance | None required for spacers |
| Classification | Non-Hazardous, Inert Plastic |
| Certifications | ISO 9001:2015 Manufacturing Process |
| Packaging | 500 Piece Bag, 1,000 Piece Bag, 2,000 Piece Bucket |
| Shelf Life | Unlimited (under normal conditions) |
| Reusable | Yes (if removed before adhesive cures) |