-
Sikagard®-720 EpoCem®Vendor:
Fine concrete surface defects need a finishing mortar that can level pores and prepare the surface for subsequent protection. Sikagard®-720 EpoCem® is a three-part epoxy-modified cementitious mortar for smoothing concrete, filling pores and repairing minor surface imperfections. It can also act as a temporary...- $373.38
- $373.38
- Unit price
- per
-
Sikafloor® Level TOPVendor:
An uneven concrete subfloor makes every subsequent flooring stage harder. Sikafloor® Level TOP is a highly flowable cement-based levelling underlayment for preparing internal concrete floors before compatible floor coverings. It can be mixed and placed manually or pumped on suitable larger projects.Prepare concrete for...
- $60.98
- $60.98
- Unit price
- per
-
RLA Aftek TruLevel BulkFill UTVendor:RLARLA TruLevel BulkFill UT is a rapid-setting, high-build cementitious underlayment for levelling uneven internal concrete floors before compatible final coverings. It is intended for substantial differences in floor level, with a specified build range of 3–100mm, rather than fine surface skim repairs. High-build subfloor...
- $47.39
- $47.39
- Unit price
- per
-
RLA TruLevel TuffTopVendor:RLARLA TruLevel TuffTop is a rapid-hardening cementitious levelling compound for prepared internal concrete floors where surface strength and resistance to concentrated loads matter. It can smooth uneven slabs before a suitable floor covering or topping. Unlike a deep-fill underlayment, it is positioned for durable...
- $82.01
- $82.01
- Unit price
- per
-
RLA True Level FlexiVendor:RLARLA True Level Flexi is a fibre-reinforced, flexible self-levelling compound for smoothing approved internal concrete and timber subfloors before compatible floor coverings. It is suited to stable, appropriately prepared substrates where some flexibility is required; it is not a remedy for loose timber boards...
- $103.29
- $103.29
- Unit price
- per
-
RLA TruLevel Fine FinishVendor:RLARLA TruLevel Fine Finish is a fast-drying, cementitious skim coat for filling and smoothing small imperfections on approved internal subfloors before laying carpet, vinyl or other compatible coverings. It is intended for thin finishing applications rather than deep levelling; use BulkFill UT or another...
- From $126.07
- From $126.07
- Unit price
- per
-
Mapei UC LevellerVendor:
Mapei UC Leveller is a fast-hardening cementitious levelling and smoothing compound for correcting uneven internal floors before suitable coverings are installed. Designed for application in layers from 3 to 70 mm under specified conditions, it is especially useful for larger floor areas that benefit...- $46.76
- $46.76
- Unit price
- per
Frequently Asked Questions
What is a self-levelling compound?
A self-levelling compound is a cement-based underlayment poured onto a floor that flows and settles to form a flat, smooth surface ready for floor coverings. Prime the slab first so it bonds and does not blister.
What is the difference between a levelling compound and a screed?
A screed is a thicker layer, from 15 mm up, used to form a new level, build height or create a fall. A compound self-smooths in thin passes from feather edge up to about 20 mm.
How thick can a levelling compound be poured?
It depends on the product. Bulk-fill levelling compounds in this range pour from 3 mm up to 70 mm in a single coat. Smoothing and skim-coat compounds feather-edge to 3 mm.
How soon can I install the floor covering after levelling?
Most levelling compounds accept foot traffic in three-to-four hours and are ready for vinyl, carpet or tile from 12-to-24 hours. Timber coverings typically need 24 hours, and coatings may need 48-to-72 hours.
Do levelling compounds need a primer?
Usually yes. Priming seals the substrate, prevents the compound from losing water too fast, and gives a stronger bond. A primer is recommended on non-porous or burnished surfaces and is required over a cured moisture barrier before you pour.
Do I need a levelling compound for a commercial floor?
Most commercial floors need one. Foot, cart and vehicle traffic flattens an untreated substrate over time. Floor coverings fail on an uneven surface. A levelling compound gives the covering a flat base to bond to and extends its service life.