-
Everflex Aqua-Ban Elastomeric Waterproof MembraneVendor:
Everflex Aqua-Ban is a single-component, water-based SBR Class III membrane for under-tile bathrooms, showers, balconies and decks. Its micro-fibre reinforcement and anti-microbial formulation create a flexible seamless barrier for wet-area systems that will be covered by compatible finishes. Compare waterproofing systems: Browse the full...- $140.53
- $140.53
- Unit price
- per
-
Everflex WPUV Elastomeric Waterproof MembraneVendor:
Everflex WPUV is a UV-stable Class III elastomeric waterproof membrane for exposed roofs, balconies, decks and compatible wet-area systems. The micro-fibre-reinforced liquid membrane cures into a seamless barrier designed to tolerate weather exposure and normal building movement. Compare waterproofing systems: Browse the full waterproofing...
- $177.01
- $177.01
- Unit price
- per
-
Everflex HVUV Elastomeric Waterproof MembraneVendor:
Everflex HVUV is a high-viscosity, UV-stable Class III elastomeric waterproof membrane for exposed roofs, balconies, decks and demanding wet-area applications. Its micro-fibre-reinforced formulation is designed to build a robust seamless film while retaining high flexibility. Compare waterproofing systems: Browse the full waterproofing membrane range...
- $177.02
$0.00- $177.02
- Unit price
- per
-
Everflex WPM Class III Under-Tile Waterproofing MembraneVendor:
Everflex WPM is a Class III liquid waterproofing membrane for bathrooms, showers, balconies and decks where the finished membrane will be protected by tile, screed or another approved finish. Its highly flexible, seamless film is intended for internal and external under-tile waterproofing systems. Compare...
- $176.09
- $176.09
- Unit price
- per
-
Corflute Protection BoardVendor:
A 2mm corrugated polypropylene protection board, 1805mm x 1210mm, laid over waterproofing membranes before backfill, screeds, or other trades get on site. It takes the impact and puncture load so the membrane underneath does not. Light enough to carry and cut with a knife,...
- From $7.41
- From $7.41
- Unit price
- per
-
Sikalastic®-1KVendor:
Sikalastic®-1K is a one-component, fibre-reinforced flexible cementitious waterproofing mortar for concrete protection and water-retaining or wet-area structures. It can be applied by brush, trowel or spray and is designed for bathrooms, balconies, swimming pools, tanks, below-ground walls and positive or negative-side waterproofing. Compare waterproofing...- $213.07
- $213.07
- Unit price
- per
-
FATRAFOL 804Vendor:FatraFATRAFOL 804 is an unreinforced PVC-P detail membrane used as an auxiliary component within reinforced FATRAFOL roofing systems. It is intended for finishing construction details, parapets, penetrations, cross-joints and complex roof areas and is not intended to form the main full-area waterproofing layer. Compare...
- From $960.00
- From $960.00
- Unit price
- per
-
FATRAFOL 807/VVendor:FatraFATRAFOL 807/V is a PVC-P roofing membrane with a non-woven PES textile backing for fully adhered roof waterproofing systems. It is designed for bonding to suitable insulation or rigid roof substrates, offers long-term UV and weather resistance and is not intended for bonding directly...
- From $1,674.64
- From $1,674.64
- Unit price
- per
-
FATRAFOL 810/V (810)Vendor:FatraFATRAFOL 810/V (810) is a polyester-scrim-reinforced PVC-P roof waterproofing membrane for mechanically fastened systems. It is designed to remain exposed to weather, with strong resistance to UV radiation, wind suction and normal roof-environment stresses. Compare waterproofing systems: Browse the full waterproofing membrane range to...
- From $1,504.00
- From $1,504.00
- Unit price
- per
-
Gripset 2PVendor:
Gripset 2P is a two-part flexible cementitious waterproofing membrane for under-tile, immersed and subterranean applications. It combines cement-based durability with flexibility, high adhesion and fast drying for wet areas, balconies, pools, tanks, planter boxes and retaining structures. Compare waterproofing systems: Browse the full waterproofing...- $188.44
- $188.44
- Unit price
- per
-
Gripset 38FCVendor:
Gripset 38FC is a fast-curing, fibre-reinforced SBR latex waterproofing membrane for internal and external areas that will be covered by tiles, toppings or other approved finishes. Gripset lists recoat from about one hour, tiling or toppings from about four hours and flood testing from...
- From $93.63
- From $93.63
- Unit price
- per
-
Gripset 51Vendor:
Gripset 51 is a solvent-free bitumen-rubber liquid membrane for underground and protected external waterproofing. It combines flexible sealing with adhesion to a broad range of building surfaces and is particularly suited to retaining walls, basement walls, planter boxes, gutters and protective coating work. Compare...
- From $71.51
- From $71.51
- Unit price
- per
-
Gripset P39Vendor:
Gripset P39 is a fibre-enhanced polyurethane-hybrid waterproofing membrane for exposed or under-tile applications. It is highly flexible, UV and weather resistant, handles early ponding and permanently wet conditions after cure, and can serve as a light-foot-trafficable finish on suitable external areas. Compare waterproofing systems:...
- $232.47
- $232.47
- Unit price
- per
-
Gripset C-1PVendor:
Gripset C-1P is a one-part, fibre-reinforced flexible cementitious waterproofing membrane for positive and negative waterproofing. It is designed for concrete and masonry structures, under-tile areas, basements, retaining walls, pools and water-retaining structures, including applications subject to hydrostatic pressure. Compare waterproofing systems: Browse the full...
- $166.30
- $166.30
- Unit price
- per
-
Gripset Xpress Multi Pro MembraneVendor:
Gripset Xpress Multi Pro is a fast-cure, water-based elastomeric waterproofing membrane for exposed and under-tile applications. It is designed to resist early rain and ponding, remain stable in permanently wet conditions after cure and provide a UV-resistant, light-foot-trafficable finish on suitable external areas. Compare...
- $389.93
- $389.93
- Unit price
- per
-
Gripset BRW PFNVendor:
Gripset BRW PFN is a self-adhesive, fibre-faced butyl-rubber sheet membrane for internal and external floor waterproofing. The fabric-laminated face accepts compatible toppings and tiled finishes, while the butyl backing provides immediate adhesion and strong resistance to movement, vibration and cracking. Compare waterproofing systems: Browse...
- $481.10
- $481.10
- Unit price
- per
-
Gripset BRW HDVendor:
Gripset BRW HD is a self-adhesive butyl-rubber sheet membrane with an HDPE face for protected structural waterproofing. Its cold-applied system provides immediate sealing for retaining walls, basements, planter boxes, roof gardens, podiums and under-pedestal systems and must be protected from long-term UV exposure. Compare...
- $462.21
- $462.21
- Unit price
- per
-
Gripset LSVendor:
Gripset LS is a hard-wearing, non-slip external trafficable coating used as the finishing layer over compatible Gripset base waterproofing membranes. It is designed for UV-exposed roofs, decks, balconies, podiums and maintenance areas subject to light foot traffic; it is not a standalone elastomeric waterproofing...
- $230.09
- $230.09
- Unit price
- per
-
RLA 2 Part Cementitious Waterproofing MembraneVendor:RLARLA 2 Part is a two-part flexible cementitious waterproofing membrane based on fast-setting high-alumina cement and a high-solids acrylic liquid. It is designed as an under-tile Class II system for balconies, roofs, wet areas and selected swimming-pool applications with strong adhesion to concrete, screeds...
- $251.23
- $251.23
- Unit price
- per
-
RLA Safe2OVendor:RLARLA Safe2O is a one-component, moisture-curing SMP waterproofing membrane developed as a solvent- and isocyanate-free alternative to traditional polyurethane systems. It forms a tough Class III elastomeric barrier for internal, external and subterranean applications and can be applied in a single coat on suitable...
- $249.19
- $249.19
- Unit price
- per
-
SILCOR® Top Coat 80Vendor:
SILCOR® Top Coat 80 is GCP's two-part, UV-resistant aliphatic polyurethane protective coating for compatible exposed SILCOR membrane systems. It creates a colour-stable, non-slip protective finish and is not a standalone waterproofing membrane. Where Top Coat 80 fits GCP's current Australian documentation lists Top Coat...- From $691.21
- From $691.21
- Unit price
- per
-
SILCOR® 560 HBVendor:
SILCOR® 560 HB is GCP's economical, one-part, high-solids polyurethane waterproofing membrane for non-exposed internal and external applications. It is a Class III high-extensibility membrane designed for horizontal, sloping and vertical substrates where the finished membrane will be permanently protected. Where to use SILCOR 560...
- $255.74
- $255.74
- Unit price
- per
-
SILCOR® 560 HB LVOCVendor:
SILCOR® 560 HB LVOC is GCP's solvent-free, very-low-VOC, one-part high-solids polyurethane waterproofing membrane for non-exposed internal and external applications. Like standard 560 HB, it is a Class III high-extensibility membrane for horizontal, sloping and vertical surfaces, but with a lower-emission formulation. Choose 560 HB...
- $279.39
- $279.39
- Unit price
- per
-
SILCOR® 575 LBVendor:
SILCOR® 575 LB is GCP's one-part, semi self-levelling, high-solids polyurethane waterproofing membrane for horizontal substrates set to falls. It forms a Class III high-extensibility membrane for internal wet areas and external horizontal waterproofing. Where 575 LB fits Balconies, roof decks and podiums. Green roofs...
- $335.77
- $335.77
- Unit price
- per
-
SILCOR® 580Vendor:
SILCOR® 580 is GCP's two-part, low-odour, heavy-duty trafficable polyurethane waterproofing membrane for horizontal substrates set to falls. It is a high-solids, chemically cured Class III membrane designed for demanding exposed and protected waterproofing systems. Where SILCOR 580 excels Stadiums, car park decks and other...
- $699.00
- $699.00
- Unit price
- per
-
Duram Azcothane Reo Waterproofing MembraneVendor:
Duram Azcothane Reo is a water-based, polyurethane-fortified acrylic hybrid membrane reinforced with micro-fibres. It is designed for protected waterproofing applications such as balconies, terraces, decks, podiums, showers and wet areas where a flexible liquid-applied membrane is required. Compare waterproofing systems: Browse the full waterproofing...- $167.05
- $167.05
- Unit price
- per
-
Duram 195 Waterproofing MembraneVendor:
Duram 195 is a single-pack, moisture-curing polyurethane waterproofing membrane that forms a tough, seamless Class III elastomeric barrier. It is used across roofs, decks, balconies, podiums, gutters, planter boxes and protected wet areas, with exposed applications requiring the Duram-specified protective top-coat system. Compare waterproofing...
- $319.58
- $319.58
- Unit price
- per
-
30mm HexCell Wall Drainage Cell - Standard Duty 550Vendor:Drainage CellA 30mm studded drainage cell that goes behind retaining walls, planter boxes, green roofs, and below-grade walls. The studs form a void that carries water down to the drain instead of letting it sit against the structure, and the sheet doubles as a protection...
- $38.46
- $38.46
- Unit price
- per
-
Terrafix Geo Textile 2m WideVendor:Soil FilterTo stabilise coastal structures, protect landfill lining systems, and reinforce ground in the road, water, coastal, and waste sectors, Terrafix Geo Textile 2m Wide (Texcel R) provides a high-elongation barrier that minimises installation damage and maintains close soil contact. This non-woven staple fibre geotextile...
- From $4.13
- From $4.13
- Unit price
- per
Frequently Asked Questions
Which membrane type suits a shower?
Liquid membranes are the common choice. They conform to junctions, corners and pipe penetrations without seams. Apply the number of coats the manufacturer specifies, with reinforcing fabric at corners and changes of plane. Sheet membranes also work where the system calls for them.
What is a trafficable membrane?
A trafficable membrane is the finished wearing surface. It resists foot or vehicle traffic without a separate covering. Use it on roofs, balconies, decks and podiums. Gripset P39, Xpress Multi-Pro, Silcor 580 and Silcor Top Coat 80 are trafficable systems.
Can I use the same membrane for a basement and a bathroom?
Not always. A basement calls for a cementitious, sheet or pre-applied system rated for continuous water contact and earth pressure. A bathroom membrane is rated for intermittent moisture behind tiles. Match the membrane to the exposure.
What is a cementitious waterproofing membrane?
A cement-based coating that bonds to masonry and concrete. It is rigid and suited to below-grade walls, water tanks and retaining structures. Sikalastic 1K, Gripset 2P Latex, Gripset C-1P and RLA 2-Part are cementitious membranes.
How do sheet membranes handle junctions?
With prefabricated corners, pipe collars and termination bars. Use the components made for that sheet system. Corners, collars and the compatible adhesive or weld must go together. Do not mix parts from different systems.