-
Megapoxy 132Vendor:
Use Megapoxy 132 for high-performance epoxy floor coating in food processing, commercial kitchens, and industrial settings. This solvent-free, low VOC coating meets AS 4020:2018 Potable Water Approval and offers 120MPa ultimate compressive strength for demanding environments.- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy LVSVendor:
Use Megapoxy LVS to penetrate, seal, and prime porous concrete, timber, and masonry. Its low viscosity ensures deep hardening, providing over 3MPa bond strength to concrete and chemical resistance for critical floor coating systems.
- From $216.72
- From $216.72
- Unit price
- per
-
Megapoxy MCVendor:
Use Megapoxy MC for heavy-duty, chemical-resistant coating on concrete and steel, offering 100% solids, excellent abrasion resistance, and VOC-free hygienic protection in aggressive environments. Its high bond strength (>3Mpa concrete, 13Mpa steel) ensures lasting performance where other coatings fail.
- From $173.63
- From $173.63
- Unit price
- per
-
Gripset LS Trafficable CoatingVendor:
Use Gripset LS as a hard-wearing, non-slip top coat for external trafficable areas like roofs, podiums, and balconies. It provides excellent UV stability and ponding water resistance over suitable Gripset base liquid membranes, ensuring long-term system durability for light foot traffic.- $230.09
- $230.09
- Unit price
- per
-
Silcor Top Coat 80 Waterproof MembraneVendor:
Protect exposed SILCOR membrane roofs, decks and balconies with a UV-resistant non-slip top coat, 0.15 mm DFT and 2 hour drying at 25°C.- From $691.21
- From $691.21
- Unit price
- per
Frequently Asked Questions
What is a trafficable coating?
A trafficable coating is a protective surface you can walk or drive on once it cures. It resists wear, chemicals, and weathering better than plain paint. Match the coating to your substrate, expected traffic, and exposure before you buy.
How do I choose a protective floor coating?
Choose by substrate, traffic level, chemical exposure, and whether the area is inside or outside. A warehouse floor needs different coverage than a balcony coating. Check the product data sheet for coverage, cure time, and what it bonds to before you order.
Can I apply a trafficable coating over cracked concrete?
Not on its own. A coating protects the surface but does not repair cracks or movement. Fix structural cracks, joints, and movement issues first, then apply the coating over a sound, prepared substrate. The coating is the finish, not the fix.
What preparation is needed before applying a protective coating?
The substrate must be clean, dry, sound, and ready for the coating the manufacturer specifies. That usually means cleaning, repairing defects, and sometimes priming. Follow the product's preparation sequence exactly. Skipping prep is the most common cause of coating failure.
How long does a trafficable coating take to cure?
Cure time depends on the product, temperature, humidity, and substrate. Some coatings handle light traffic in hours; others need days to cure fully. Check the product data for the cure window before you schedule the job or allow traffic back on the surface.
Do I need a primer before a trafficable coating?
Sometimes. Some coatings bond directly to a prepared substrate. Others need a primer for adhesion. The product data tells you which substrates need priming and which primer to use. Using the wrong primer or skipping it where needed causes the coating to delaminate.