Megapoxy 132 is a solvent-free, high-strength epoxy coating for factory and warehouse floors, commercial kitchens and food or beverage production areas. It forms a smooth, high-gloss surface that resists abrasion and is easy to keep clean.
Use it on prepared concrete in warehouses, showrooms, forklift ramps and processing facilities. Choose Clear for a transparent gloss or N35 Grey for an opaque finish; compatible pigments can add colour. For a textured surface, broadcast fine aggregate between coats. Megapoxy 132 is approved to AS 4020:2018 for contact with potable water.
Choose 132 for a high-strength, high-gloss floor finish in Clear or N35 Grey. Megapoxy MC is a heavy-duty maintenance coating with more colour options and a longer two-hour working time, suited to industrial floors, walls and steelwork. For sealing porous concrete before an MC coating, Megapoxy LVS is the primer rather than the finished coating.
Grind or mechanically prepare concrete, removing old coatings, laitance, oil and dust. Mix two parts A to one part B by volume and apply within approximately 30 minutes at 25°C. Allow at least 24 hours to cure at 25°C; lower temperatures require longer. Do not apply below 10°C.
Is Megapoxy 132 suitable for food-processing floors?
Yes. It is designed for food and beverage facilities, and the coating is AS 4020:2018 approved for contact with potable water.
Can Megapoxy 132 be made non-slip?
Yes. Broadcast fine aggregate between coats to create a textured surface. Without aggregate, Megapoxy 132 forms a smooth, high-gloss finish.
What is the difference between Megapoxy 132 and MC?
Megapoxy 132 is a high-strength, high-gloss coating in Clear or N35 Grey with a 30-minute working time. Megapoxy MC is a heavy-duty maintenance coating with more colour options and a two-hour working time.
How long does Megapoxy 132 take to cure?
Allow at least 24 hours at 25°C, or 48 hours at 15°C. A thin coat typically sets in 4–6 hours at 25°C before recoating.
| Property | Value |
|---|---|
| Mixing Ratio | 2 Parts A to 1 Part B |
| Pot Life | 30 minutes |
| Minimum Cure Time at 25°C | 24 hours |
| Minimum Cure Time at 35°C | 12 hours |
| Thin Film Cure at 25°C | 4-6 hours |
| Application Temperature | 10°C |
| Viscosity Part A at 25°C | 1300 – 1900 cps |
| Viscosity Part B at 25°C | 130 – 160 cps |
| Viscosity | 620 cps |
| S.G. Part A at 25°C | 1.12 – 1.14 |
| S.G. Part B at 25°C | 0.97 – 0.99 |
| Specific Gravity | 1.08 |
| Ultimate Compressive Strength ASTM C579 | 120 MPa |
| Bond Strength | >3 MPa |
| Tensile Bond Strength Steel ASTM D897 | 14 MPa |
| Modulus | 0.068 GPa |
| Flexural Strength | 81 MPa |
| Tensile Strength | 50 MPa |
| Tensile Lap Shear Strength ASTM D1002 (steel to steel) | 8 MPa |
| Shore D Hardness | 75 |
| Surface Resistivity | 10¹² Ohm |
| Volume Resistivity | 8.5 x 10¹⁰ Ohm.cm |
| VOC Content | 7 g/l |
| Water Vapour Transmission | 0.000 gram/hr m² |
| Water Absorption Increase in Weight ASTM D570 | 0.225 % |
| Water Resistance | 0.225 Increase in weight (%) |
| Compressive Strength at Yield | 59MPa |
| Compressive Strength (ASTM D695-23) | 80 MPa |
Here are some common examples on where Megapoxy 132 used by our customers.
