-
B.A.T Bright Steel Square Notch TrowelVendor:B.A.TA square notch trowel for ceramic, porcelain, and stone adhesive beds. The square notch combs full ribs that collapse evenly under the tile, which is what pushes air out and coverage up.Bright steel blade, sizes from 4mm to 12mm. Match the notch to the...
- $25.00
$0.00- $25.00
- Unit price
- per
-
BAT Professional Stainless Steel TrowelVendor:B.A.TA stainless square notch trowel for tile adhesive beds, in notch sizes from 4mm to 15mm. Pick the size the adhesive datasheet calls: the notch sets how much adhesive goes down, and coverage is where bond failures start.Stainless shrugs off cement mortars and will...
- $29.17
$0.00- $29.17
- Unit price
- per
-
BAT Pro Gauging Trowel with Swan NeckVendor:B.A.TA small trowel for moving adhesive and grout from bucket to bed or hawk. The carbon steel blade is stiff enough to scoop dense materials without flexing, and the pointed shape loads a clean cut of mix.The swan neck in the handle hooks over...
- From $12.50
- From $12.50
- Unit price
- per
-
BAT PRO Square Trowel With Swan NeckVendor:B.A.TA flat square trowel for laying tile adhesive to an even bed. The steel blade holds its edge against abrasive mortars, and an even bed is what stops lippage and hollow spots under the tile.The swan neck hooks over the bucket rim between loads...
- From $12.50
- From $12.50
- Unit price
- per
-
BAT Bright Steel Trowel V NotchVendor:B.A.TA V-notch trowel for laying adhesive at the spread rate the manufacturer asks for. The notch size sets how much adhesive goes down: pick the size your adhesive datasheet calls, then hold a consistent angle and the ribs come out even.Available in 3mm, 5mm,...
- $28.25
$0.00- $28.25
- Unit price
- per
-
Premium Pointed Rubber Grouter – Japanese RubberVendor:B.A.TThis grouter does the same job as the BAT Trade Quality pointed grouter: grouting corners and narrow joints. The difference is the blade. Japanese rubber is softer and more flexible, so it holds an edge longer and gives a smoother finish on soft or...
- $40.50
- $40.50
- Unit price
- per
-
BAT Pointed Grouter Trade QualityVendor:B.A.TA pointed rubber grouter pushes grout into corners and narrow joints where a flat float cannot reach. The BAT Trade Quality model has a pointed rubber blade and a timber handle. Work it along the joint to compact the grout, then strike off the...
- $21.08
- $21.08
- Unit price
- per
-
BAT Trims Tile CrossesVendor:B.A.TKeep grout joints even and tiled layouts looking sharp with B.A.T Tile Crosses. These cross-shaped plastic spacers help maintain consistent gaps between tiles as you set out walls, floors and feature areas.Choose from 1.5 mm, 2 mm and 3 mm nominal joint sizes. Smaller...
- From $3.17
- From $3.17
- Unit price
- per
-
BAT Tilers and Slaters SpongeVendor:B.A.TA 300mm sponge for washing grout haze off tile and slate. The oversized face covers large-format work quickly, and the dense synthetic holds just enough water: wet enough to clean the joint, not so wet it washes the grout back out.It resists shredding on...
- $11.75
- $11.75
- Unit price
- per
-
BAT Trims Tile WedgesVendor:B.A.TTile wedges adjust spacing where a cross will not fit. The taper runs from 5mm down to a fine point, so you slide one under a tile edge to lift it level or nudge two tiles apart to widen a joint. Pull them out...
- From $6.67
- From $6.67
- Unit price
- per
-
Raimondi Epoxy SpongeVendor:B.A.TA Raimondi cellulose sponge made for epoxy grout, where ordinary sponges either smear resin into a haze or gouge the joints. The dense natural cellulose lifts and holds the resin residue instead of smearing it, and the controlled density cleans the tile face without...
- $23.25
- $23.25
- Unit price
- per
-
Panther Grout Clean Up SystemVendor:PantherA rolling cleanup station for washing grout off big floors. The TRI-roller wringer squeezes the sponge to the moisture you set, so joints get cleaned without the soak that washes pigment out of the grout. A sediment grate holds the grit at the bottom...
- $97.17
- $97.17
- Unit price
- per
-
Panther Stainless Steel TrowelVendor:PantherA 280mm stainless notch trowel for tile adhesive beds, with square notch sizes from 4mm to 15mm. The wide blade covers more floor per pass, and the spot-riveted build holds together under the torque of heavy combing.Stainless steel will not rust or pit against...
- $11.58
$0.00- $11.58
- Unit price
- per
-
Panther GCS Quick Release Float HandleVendor:PantherThe quick-release float handle for the Panther Grout Cleanup System. Click a sponge in, wash, click it out, and the next sponge goes on in seconds: no screws, no downtime in the middle of a floor.The positive-click lock holds the sponge without wobble, so...
- $8.40
- $8.40
- Unit price
- per
-
Panther Levelling System WedgesVendor:PantherPanther Levelling System Wedges are the reusable part of the Panther tile levelling system. Insert a wedge into a compatible base clip to hold adjoining tile edges in alignment while the adhesive sets. The pack contains 250 wedges.Where to useUse with the appropriate Panther...
- $31.83
- $31.83
- Unit price
- per
-
Panther Levelling System Base ClipsVendor:PantherPanther Levelling System Base Clips help keep adjoining wall and floor tile edges aligned while the adhesive cures. Choose 1.5 mm or 2 mm nominal grout-joint spacing for tiles 3–12 mm thick. Use the clips with compatible reusable Panther levelling wedges, sold separately.Available buying...
- From $27.50
- From $27.50
- Unit price
- per
-
Replacement Sponge for Panther Grout Cleanup SystemVendor:PantherThe replacement sponge for the Panther Grout Cleanup System, cut to work with the TRI-roller wringer. It holds its shape through a job of wringing and lifts residue without dumping water back into fresh joints.Two sizes: 140x280mm and 180x335mm. Sponges are consumables; keep a...
- From $10.58
- From $10.58
- Unit price
- per
-
Panther Thin Turbo Diamond BladeVendor:PantherA thin turbo diamond blade for cutting porcelain, marble, and granite without chewing the edge. The thin rim takes a smaller bite per pass, which is what keeps chips out of expensive tile, and the reinforced core runs true instead of wobbling through the...
- From $29.92
- From $29.92
- Unit price
- per
-
Panther Levelling System 1.5mm Large Base Clips – 250 PackVendor:PantherPanther Levelling System 1.5 mm Large Base Clips help keep adjoining tile edges level while adhesive cures. The larger clip base is designed for tiles 11–20 mm thick and sets a nominal 1.5 mm joint. This pack contains 250 single-use clips.Where to useUse these...
- $19.41
- $19.41
- Unit price
- per
-
DTA Flat Out Levelling System Tile Clips 1.5mmVendor:
Levelling clips stop tile lippage. Slot the clip base under two adjoining tiles, insert the Flat Out wedge with the pliers, and the clip pulls the tiles level while the adhesive cures. Break the stem off along the scored line next day and reuse...- From $27.50
- From $27.50
- Unit price
- per
-
Raimondi Rectangular Grout Float – Hard Green Rubber – 115 × 250mmVendor:RaimondiSpread grout accurately across walls and floors with the Raimondi Rectangular Grout Float – Hard Rubber. Its firm green rubber face helps press grout into tile joints while giving the tiler controlled handling around ceramic, porcelain and natural stone installations.The rectangular 115 × 250...
- $30.00
- $30.00
- Unit price
- per
Frequently Asked Questions
How do I choose the right trowel for my tile job?
Match the trowel notch size to the tile size and adhesive type. Small wall tiles need a 4mm or 6mm square notch. Large-format floor tiles need a 10mm or 12mm square notch. V-notch trowels suit flooring substrates where adhesive spread rate matters.
What is a tile levelling system and do I need one?
A levelling system uses clips and wedges to hold adjacent tiles at the same height while the adhesive sets. It prevents lippage, the visible step between tiles. Levelling systems matter most on large-format and rectified-edge tiles where a small height difference shows.
Can I use the same grouter for cement and epoxy grout?
A standard pointed rubber grouter works with cement-based grout. For epoxy grout, use a grouter made from Japanese rubber compound. Standard rubber breaks down in epoxy. The Raimondi epoxy sponge is another option designed for epoxy grout clean-up.
What is the difference between tile crosses and tile wedges?
Tile crosses set a fixed joint width at 1.5, 2, or 3mm and you remove them after the adhesive sets. Tile wedges taper from 5mm to a fine point and let you make micro-adjustments during installation. Wedges are reusable.
Do I need a special sponge for epoxy grout?
Yes. Standard sponges shred in epoxy grout. The Raimondi epoxy sponge is made from natural cellulose and handles epoxy without breaking apart. For cement-based grout, the Panther grout clean-up system works well. It has a bucket, wringer, and replacement sponges.