11
Attention: This product is classified as a dangerous good. Shipping costs will be adjusted accordingly.
Acetone Cleaning Solvent is an acetone cleaning solvent that removes difficult residues including waxes, oils, and polyurethane adhesives for industrial and trade maintenance, with a fast-evaporation rate that minimizes downtime during surface preparation. This solvent serves as a critical thinning agent for acetone-based PVC and polyurethane adhesives, as well as polyester resins utilized in automotive and marine fiberglass repairs. It is chemically compatible with water, alcohols, esters, and ethers, allowing it to dissolve a wide range of natural and synthetic gums or dyes. Because Acetone Cleaning Solvent is a highly flammable Class 3 liquid, it must be applied in controlled, well-ventilated environments to prevent the accumulation of hazardous vapors.
Frequently Asked Questions About Adheseal Acetone
Q: Can I use Adheseal Acetone to clean epoxy applicators?
A: Yes. Its rapid-dissolving capability makes it highly effective for cleaning uncured epoxy from tools and mixing vessels. Always use in a well-ventilated area to avoid vapour build-up.
Q: Is this product safe for polystyrene foam substrates?
A: No. Acetone will dissolve polystyrene foam. Avoid using it for cleaning or thinning near foam insulation or foam mouldings.
Q: What is the evaporation rate of Adheseal Acetone?
A: It evaporates very rapidly—slower than ether but significantly faster than most commercial solvents. This makes it ideal for quick drying without residue.
Q: Can I use it to thin polyester or PU adhesives?
A: Absolutely. It’s compatible with acetone-based PU and PVC adhesives and polyester resins used in marine or auto fibreglass applications.
Q: Is this solvent environmentally friendly?
A: Yes. It contains zero VOCs and is considered VOC-exempt under Australian emission standards, making it suitable for environmentally sensitive applications.
Applications & Benefits
| Application / Use Case | Key Benefit | Primary Trades |
|---|---|---|
| Epoxy applicator clean-up | Removes uncured resin fast without residue | Fibreglassers, marine repair, auto body trades |
| Thinning polyester resin | Improves flow and wet-out for fibreglass repair | Boilermakers, automotive trades |
| PVC/PU adhesive clean-up | Removes stubborn glue residues | Glaziers, builders, joiners |
| Surface degreasing | Ensures clean bonding surfaces | All trades |
Applying Adheseal Acetone: Protocols & Best Practices
General Application Steps:- Preparation: Work in a well-ventilated space. Identify surfaces that need degreasing or adhesive removal.
- Application: Apply a small quantity using a lint-free cloth or brush. Avoid overuse to prevent vapour accumulation.
- Wipe-Off: Use clean dry cloths for residue removal. For precision work, use a cotton bud or syringe applicator.
- Dry Time: Evaporates within seconds depending on ambient temperature. Wait before applying new adhesive layers.
Limitations & Safety
Product limitations and safety information
Limitations:
- Not suitable for polystyrene foam—causes chemical damage
- Highly flammable—keep away from heat, sparks and open flame
- Do not use in confined spaces without ventilation
Safety & Handling:
- PPE: Nitrile gloves, safety goggles, solvent-resistant apron
- Ventilation: Use in well-ventilated areas only
- Handling: Use small quantities to limit vapour exposure
- First Aid: If inhaled, move to fresh air. If in eyes, flush for 15 mins. Seek medical help if irritation persists.
Adheseal Acetone Adhesion & Preparation Guide
-
Substrate preparation guidelines
- Metal: Wipe with lint-free cloth soaked in acetone to remove oils – Primer: No primer required.
- Fibreglass: Clean thoroughly with acetone to prep for resin or adhesive – Primer: No primer required.
- Glass: Wipe clean and allow full evaporation – Primer: No primer required.
- PU or PVC Residue: Scrub with acetone to soften before removal – Primer: Not applicable.
- Choosing a selection results in a full page refresh.