Aluminium Angle Equal 76 × 76 is a large equal-leg, mill-finish aluminium extrusion offering 76mm of coverage on both sides of a corner. It suits substantial panel edges, broad corner guards and larger shopfitting or caravan fabrication details where a smaller L-section does not extend far enough across the adjoining faces.
The key buying decision is both section thickness and stock length. A 3250mm run and a 6500mm run are different options here, each supplied at a different wall thickness. Select the exact variant for your project rather than treating the longer piece as identical stock.
| Leg dimensions | 76 × 76 mm |
|---|---|
| Geometry | Equal angle |
| Alloy / temper | 6060 T5 |
| Finish | Mill finish |
| Current stock | 3.0 mm × 3250 mm or 3.2 mm × 6500 mm |
Available variants: 3.0mm × 3250mm or 3.2mm × 6500mm. Allow for handling and freight of the longer extrusion, measure the required face coverage and check joint positions before cutting.
Deburr all edges and prepare the 6060-T5 mill finish for any required coating or fixing method. These broad legs do not establish a structural load rating; engineered brackets and supports must be selected to design.
What stock options are available in 76 × 76 mm aluminium angle?
Current Adheseal stock is 3.0 mm × 3250 mm or 3.2 mm × 6500 mm, supplied in 6060 T5 mill finish.
Aluminium Angle Equal 76x76 Physical Properties
| Property | Value |
|---|---|
| Alloy | 6060 |
| Temper | T5 |
| Finish | Mill Finish |
| Form | Angle Extrusion |
| Strength to Weight Ratio | High |
| Corrosion Resistance | Excellent |
| Weldability | Excellent |
| Machinability | Good |
| Lengths Available | Varies by size |
| Processing Capabilities | Cutting, drilling, welding, anodising, powder coating, painting |
| Typical Applications | Vehicle body building, caravans, aerospace, shopfitting, frames, architectural frameworks |