11
Sika Sikadur 31 CF Normal two-component structural epoxy adhesive containers

Sikadur®-31 CF Normal

Specify your quantity and delivery details for trade pricing.

Two-component, thixotropic structural epoxy adhesive and repair mortar for concrete, masonry and steel work, including damp substrates. Supplied in pre-batched 6kg and 30kg A+B kits.

Vendor: Sika
SKU: 100300033
Availability: Out Of Stock
$288.15
$288.15
Prices do not include GST

Special order

This item is supplied to order and is not confirmed as in stock at any store. For availability before visiting, email contact@adheseal.com.au.

Guaranteed safe checkout
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa
  • Secure SSL encrypted checkout
  • Fast, tracked shipping
  • Easy returns & support
Shipping & Delivery

Flat-rate shipping $17.95 + GST (metro and standard zones). Excludes remote/regional/high-cost postcodes and certain items (DG, oversized, long-length, or bagged products 15 kg+). If your order includes any of these, we will contact you to arrange additional freight charges. Online purchases only.

Structural epoxy bonding and concrete edge repairs demand an adhesive that stays where it is applied. Sikadur®-31 CF Normal is Sika’s two-component, moisture-tolerant epoxy adhesive and repair mortar for rigid bonding, patching and filling on suitable construction substrates. Its thick, non-sag consistency makes it especially useful on vertical faces and overhead repairs where a flowing epoxy would be difficult to control.

For bonding, patching and edge repairs

Use Sikadur-31 CF Normal to bond suitable concrete, masonry, natural stone, ceramics, steel and other approved materials, or to rebuild damaged corners, edges and localised voids. It is also suited to specified joint and crack-edge repairs. Unlike a flexible joint sealant, this is a rigid, high-strength epoxy system intended for structural bonding and repair applications.

What makes it practical on site?

The thixotropic mix holds its shape during vertical and overhead work, while its moisture tolerance and strong adhesion provide flexibility when preparing appropriate construction substrates. Sika supplies pre-batched Part A and Part B kits in 6 kg and 30 kg sizes, with contrasting component colours to help confirm thorough mixing.

Choosing the right epoxy system

Sikadur-31 CF Normal is intended for professional use within Sika’s stated application temperature range of 10–30°C. Substrate preparation, mixing, layer thickness and curing conditions remain important to performance. Check the current Australian product data sheet before specifying it for structural work or unusual substrates.

Prepare clean, sound dry or matt-damp concrete, steel or compatible masonry. Mix the two pre-proportioned components to a uniform grey consistency and apply before the pot life expires, using appropriate joint or repair geometry. Observe the minimum 2 mm and maximum 30 mm layer limitations.
Not designed for moving joints. Substrate strength, concrete maturity, required structural bond and moisture conditions must be assessed. Do not apply outside +10°C to +30°C or exceed 30 mm maximum thickness without a specified system design.

Sikadur®-31 CF Normal Physical Properties

Sikadur®-31 CF Normal Physical Properties
Property Value
Base Two-component structural epoxy adhesive
Mixing Ratio A:B = 2:1 by weight or volume
Layer thickness 2–30 mm
Non-sag thickness on vertical surfaces Up to 15 mm under test conditions
Mixed density at 23°C Approximately 1.9 kg/L
Pot life at +23°C Approximately 55 min (200 g mix)
Application Temperature +10°C to +30°C
Compressive strength, 7 days at +23°C Approximately 65 MPa
Consumption Approximately 1.9 kg/m² per mm
Shelf Life 24 months
Potable Water Approval AS/NZS 4020:2018 specified contact

Alternative Products

Need Help with Sikadur®-31 CF Normal?

Need more information about this product? Hit the button below and reach out to one of our experts now.

Recently Viewed Products