12
This twin-component dispensing gun is designed for compatible 400ml coaxial cartridges with a 10:1 component ratio. It is used with the matching two-part adhesive cartridge system and the appropriate static mixer where required.
Unlike side-by-side twin-component guns, this model accepts a coaxial cartridge format. Verify cartridge dimensions and the stated 10:1 ratio before ordering; the dispensing format must match your adhesive system.
Drives 400ml coaxial cartridges of viscous structural adhesives.
Reinforced frame holds up under full trigger pressure.
Smooth alloy trigger action for steady, even beads.
Load the coaxial cartridge, fit the mixer, and purge to an even blend before anchoring. Inject from the base of the hole and withdraw as it fills. Keep the gun and cartridges within 5 to 35 degrees for correct cure.
For 400ml coaxial (10:1) cartridges only, not side-by-side pairs. Cold material is thick material: warm cartridges to range before high-pressure work.
Twin Component Cartridge Gun 400ml 10:1 Physical Properties
| Property | Value |
|---|---|
| Material | Aluminium-Alloy Handle, Reinforced Steel Frame |
| Dispensing Ratio | 10:1 |
| Cartridge Compatibility | 400ml Coaxial, 10:1 Ratio |
| Application Temperature | 5°C to 35°C (41°F to 95°F) |
| Storage Temperature | 5°C to 50°C (41°F to 122°F) |
| Chemical Compatibility | Epoxy, Polyurethane, Acrylic Adhesives |
| Certifications | ISO 9001, Australian Construction Equipment Standards |