-
Adheseal PU15 Polyurethane AdhesiveVendor:
Adheseal PU15 is a low-modulus polyurethane sealant and adhesive built for highly flexible movement and connection joints, with a particular strength in window perimeter sealing, glazing weatherseals, curtain walls and façade joints. Its soft Shore A 15 cured profile, 0.2 MPa modulus and greater...- From $11.99
- From $11.99
- Unit price
- per
-
Adheseal N40 Slicone SealantVendor:
For wet areas, metal roofing, marine joints, and general industrial sealing where movement, moisture, and mould are constant risks, Adheseal N40 Silicone Sealant provides a highly flexible, non-corrosive barrier. This neutral-cure oxime formulation adheres reliably without corroding sensitive metals like galvanised steel or Colourbond,...
- From $6.40
- From $6.40
- Unit price
- per
-
Adheseal N70 Industrial Silicone SealantVendor:
Adheseal N70 Industrial Silicone Sealant is a neutral-cure, high-movement silicone for industrial sealing, window perimeters, general glazing, weathersealing, expansion joints and exterior construction joints. With ±50% movement capability and 600% elongation at break, N70 is designed for demanding joints that need to remain flexible...
- From $8.50
- From $8.50
- Unit price
- per
-
Adheseal Hi-Flex Construction Plus MS Polymer SealantVendor:
For expansion joints, perimeter window fixing, and cladding joints where high movement capability is required, Adheseal Hi-Flex Construction Plus MS Polymer Sealant provides a neutral-cure, low-modulus elastomeric seal that accommodates up to 50% joint movement. Based on hybrid MS polymer technology, this single-component sealant...
- From $11.77
- From $11.77
- Unit price
- per
-
Megapoxy 132Vendor:
For floor protection in food and beverage production facilities, pharmaceutical industries, hospital kitchens, and high-traffic forklift ramps, Megapoxy 132 provides a high-strength, solvent-free epoxy barrier. This low-viscosity system is formulated to resist regular industrial cleaning and abrasion, and it carries AS 4020:2018 approval for...- From $195.36
- From $195.36
- Unit price
- per
-
Megapoxy MCVendor:
For high-traffic food and beverage facilities, chemical bunds, and wastewater infrastructure, Megapoxy MC provides a 100% solids, VOC-free epoxy maintenance coating that resists heavy abrasion, chemical exposure, and hydrogen sulphide gas. It protects concrete and steel substrates, curing to a hygienic, dust-free gloss finish...
- From $173.63
- From $173.63
- Unit price
- per
-
Megapoxy MegadureVendor:
For equipment exposed to severe wear in mines, ball mills, coal-fired plants, dredging operations, and abrasive slurry pumps, Megadure Ceramic provides a high alumina bead epoxy lining to protect critical metal, steel, and concrete surfaces from extreme abrasion. What it does Megadure Ceramic is...
- $128.51
- $128.51
- Unit price
- per
Frequently Asked Questions
Which coating suits a food factory floor?
Megapoxy 132. It is a solvent-free epoxy barrier for food and beverage areas, pharmaceutical plants, hospital kitchens, and forklift ramps. It needs shot-blasted, dry concrete and its full cure before traffic.
What protects bunds and wastewater concrete?
Megapoxy MC. It is a VOC-free epoxy maintenance coating for chemical bunds, wastewater assets, concrete, and steel. It resists spills once cured. Check chemical resistance against your actual exposure.
What is Megadure used on?
Badly worn metal and concrete. It is a high-alumina bead epoxy for mines, ball mills, slurry pumps, and processing equipment under severe abrasion. Apply it at the thickness the data sheet specifies.
Are there sealants in this range?
Yes. Adheseal N70 and N40 are neutral-cure silicones, Hi-Flex Construction Plus is an MS polymer, and PU15 is a polyurethane. Each stays flexible in moving joints. See Silicone Sealants and Hybrid MS Polymer Sealants for more options.
How thick do these coatings go?
Each product sets its own build. 132 and MC go on by roller or squeegee in stated coats. Megadure is trowelled to a wear-layer depth. Do not thin them. Respect the recoat windows and cure times.
Do these coatings need a primer?
Sound, dry, blast-cleaned concrete usually needs no primer. Marginal or oily slabs may need an epoxy primer first. Follow the current Megapoxy data sheet for your substrate. Test a small area before the full application.