-
Megapoxy 108Vendor:
Megapoxy 108 is a rapid-setting liquid epoxy for bridge pile splicing and high-strength precast concrete repairs. It develops early strength quickly, making it especially useful when civil works cannot wait for a conventional structural grout to cure.Bridge piles and fast concrete repairsUse it to...- From $250.10
$0.00- From $250.10
- Unit price
- per
-
Megapoxy 254Vendor:
Megapoxy 254 is a white, non-sag epoxy adhesive paste for bonding and repairing concrete, metal, brick, fibre cement, ceramics and natural stone. Its thick, creamy consistency stays in place on vertical and overhead surfaces, while the non-staining formulation makes it useful for white marble...
- $595.60
- $595.60
- Unit price
- per
-
Megapoxy 63Vendor:
Megapoxy 63 is a translucent, two-part epoxy adhesive gel for natural stone mitres, porcelain edges and detailed masonry bonding. It forms a neat, thin glue line without the opaque finish of a typical repair paste, and can be tinted with compatible pigment paste.Precision stone...
- From $183.51
- From $183.51
- Unit price
- per
-
Megapoxy 69Vendor:
Megapoxy 69 is a high-strength, non-sag epoxy gel for joining natural stone, structural timber, metals and fibreglass. Its translucent, light-yellow finish allows neat, thin glue lines while providing the impact resistance needed for demanding fabrication and repair work.Mitres, joinery and mixed-material bondingUse 69 for...
- From $85.28
- From $85.28
- Unit price
- per
-
Megapoxy H - N35 GreyVendor:
Megapoxy H is a low-viscosity, hydrophilic epoxy liquid for bonding new concrete to existing concrete, anchoring steel and repairing cracks in damp or wet conditions. It complies with AS/NZS 4020:2018 for structures in contact with drinking water.Wet-condition concrete bonding and repairUse H for wet-to-dry...
- From $192.96
- From $192.96
- Unit price
- per
-
N35 Grey
-
Natural
-
Megapoxy HTVendor:
Megapoxy HT is a hydrophilic, non-sag epoxy gel for structural bonding and concrete repair where the surface is damp, wet or submerged. Unlike a runny injection resin, its gel consistency holds on vertical and overhead faces and can be applied in thicker layers.Wet and...
- From $197.13
- From $197.13
- Unit price
- per
-
Megapoxy HXVendor:
Megapoxy HX is an extra-low-viscosity epoxy resin for injecting fine, non-moving cracks and penetrating porous stone or concrete. At approximately 200 cps mixed viscosity, it flows into narrow spaces that thicker bonding resins cannot readily reach.Fine crack injection and stone strengtheningUse HX for low-pressure...
- From $203.68
- From $203.68
- Unit price
- per
-
Megapoxy MegabondVendor:
Megapoxy Megabond is a high-strength, off-white epoxy adhesive for bonding natural stone, ceramic tile and prepared masonry. Its non-staining formulation is especially useful when fixing light-coloured marble or other stone where dark adhesive could affect the finish.Stone and tile bonding without stainingChoose Megabond for...
- $500.28
- $500.28
- Unit price
- per
-
Megapoxy P1Vendor:
Megapoxy P1 is a non-sag, two-part epoxy paste for structural concrete repairs, gap filling and bonding steel, stone and precast elements. Its very low-VOC formulation complies with AS/NZS 4020:2018 for use in structures in contact with drinking water.Concrete, tank and pipe repairsUse P1 to...
- From $83.99
- From $83.99
- Unit price
- per
-
Megapoxy PF - WhiteVendor:
Megapoxy PF is a rapid-setting, non-sag epoxy paste for urgent concrete, stone and metal bonding or repairs. It sets in approximately seven minutes and develops more than half its ultimate strength within 15 minutes of mixing at 25°C.Fast repairs where holding time mattersUse PF...
- From $106.70
- From $106.70
- Unit price
- per
-
White
-
Grey
-
Megapoxy PM - WhiteVendor:
Megapoxy PM is a two-part, non-sag epoxy adhesive paste for bonding precast concrete, stone, metal, brick and fibre cement. Its creamy consistency holds on vertical and overhead faces and is formulated not to stain light-coloured marble or ceramics when mixed correctly.Bonding and rebuilding on...
- From $83.99
- From $83.99
- Unit price
- per
-
White
-
Grey
-
Mapei Keraflex Maxi S1 - WhiteVendor:
Mapei Keraflex Maxi S1 is a high-performance, polymer-modified cementitious tile adhesive designed for large-format ceramic and porcelain tiles and suitable natural stone. Its combination of S1 deformability, extended open time and reduced vertical slip gives tilers a practical way to position larger, heavier tiles...- From $43.33
- From $43.33
- Unit price
- per
-
White
-
Grey
-
Mapei Kerapoxy AdhesiveVendor:
Mapei Kerapoxy Adhesive is a two-component epoxy tile adhesive developed for installations where a conventional cement-based adhesive may not provide the chemical resistance or bonding performance required. Its thixotropic, no-vertical-slip consistency helps hold ceramic, porcelain and suitable stone in position while installing on walls,...
- $182.47
- $182.47
- Unit price
- per
Frequently Asked Questions
What can I bond with these products?
These adhesives bond natural stone, concrete, brick, tile, ceramic, metal fixtures and structural anchors. Epoxy grades handle most structural and stone work. Cementitious grades suit tile and masonry. Pick by substrate, load, movement, moisture and cure time.
Why are there so many Megapoxy grades?
Each Megapoxy grade has a different viscosity, sag resistance, cure behaviour and colour. Some are non-sag pastes for vertical or overhead work. Some are thin materials for cracks. Others are translucent for visible stone joints. Check the product data before you choose.
Is there a cementitious tile adhesive in this collection?
Yes. Mapei Keraflex Maxi S1 bonds natural stone and large-format tile. It also appears in the Tiling collection because one product can serve more than one trade. Its product type is Adhesive. The two placements only show where you use it.
How do I prepare a stone surface before bonding?
Clean the surface, remove contamination, control moisture and create a sound bond surface. Some substrates need priming. Follow the product instructions for stone, concrete, masonry, metal and ceramic. Do not rely on a generic rule.
Can I use these for visible stone joints?
Yes. Megapoxy 63 gives a translucent adhesive line for visible natural-stone work. Megapoxy 254 is non-staining on natural stone and ceramics. Megapoxy Pigment Paste is available for colour matching later in the job. Check colour, staining, substrate compatibility and cure conditions first.